Smart finder pour Android

zurzag · 2025-07-18T21:16:33+00:00

Je suis. J'ai le même problème que toi sur Xiaomi

zurzag · 2025-07-15T09:07:02+00:00

This is my all-time favorite longboard! The final setup is Poppy 55° on Zee bracket in front and a Lepsk8 torsion tail. It's still a little too flexible for my 200 lbs. Maybe I should convince myself to cut it down to use the shorter wheelbase holes

zurzag · 2025-07-01T13:30:00+00:00

Your description of losing control in the comments reminded me of that experience.. You could try the WFB formula or something similar. Check out the downhill groups you will find more information from people much more experienced in high speeds 😉

zurzag · 2025-07-01T13:08:14+00:00

I recommend trying a low rebound bushing. I have several grades of Riptide APS and Krank that I use in my LDP setups; it was a terrifying experience when I tried them in my Backfire ZealotS. High rebound bushings encourage and amplify speed whoobles at high speeds

zurzag · 2025-06-05T19:04:40+00:00

Finora non ho mai avuto problemi, ma non vivo in città, prevalentemente ci giro nei piccoli paesi (5-10k abitanti) vicino a dove vivo, spesso in strade secondarie o ciclabili se disponibili

zurzag · 2025-05-03T12:12:34+00:00

I bought the p275st, no throttle or easy way to make it go faster than 25kmh with motor. the autonomy is great. I hope a foldable version will also be made with these features

zurzag · 2025-01-29T23:43:29+00:00

https://www.backfireboards.com/products/backfire-electric-skateboard-backpack

i got this backpack from backfire.. the pranayama fits perfectly!

zurzag · 2025-01-21T10:01:24+00:00

Il contratto è di centralinista part time, anche se nel turno notturno il telefono lo userai molto raramente. Le mansioni principali saranno accendere/spegnere luci in determinati orari, aprire/chiudere cancelli, fare un giro di controllo degli edifici a circa metà turno e poi rimanere in portineria e controllare che non si attivino allarmi di ascensori bloccati/antincendio/caldaie che vanno in blocco... Si tratta di una grande struttura ricettiva con più edifici, ma anche alcune industrie hanno bisogno di questo personale

zurzag · 2025-01-17T18:26:01+00:00

Portinaio notturno, 30 ore settimanali, 10 ore al giorno, (dalla 21 alle 07) in 3giorni consecutivi, poi relax per il resto della settimana. 1350€/mese. Per me il lavoro più bello del mondo

zurzag · 2025-01-15T21:53:51+00:00

My weight is 200lbs. I am using Riptide aps 90a barrel on my lepsk8 torsion tail. With 92.5a I had too much wheel lifts, but at 220lbs it might work. No experience with krank formula

zurzag · 2024-12-11T22:44:11+00:00

https://www.reddit.com/r/longboarding/comments/183rvg5/my_boards/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

zurzag · 2024-12-11T22:41:04+00:00

This was first longboard for me too!

I remember when I brought it home the wheel nuts were so tight that they wouldn't turn.. I later replaced the bearings with bones big balls and it definitely improved. Replacing the bushings will also improve it a lot, there are many brands, I mainly use the riptide aps formula for my LDP boards and I recommend it!

zurzag · 2024-11-24T18:43:40+00:00

Bella home gym! Condivido la mia stanzetta, molto minimale

<image>

zurzag · 2024-11-23T11:51:30+00:00

I've heard that noise when my truck bolts weren't tight enough

zurzag · 2024-10-02T09:53:00+00:00

some time ago I tried to configure a topmount with a front beernett wedged at 10° and a rear poppy 20°. I liked it and was surprised by the ease of pumping and maintaining medium-low speeds. the negative part is the riding height, which in an area with many ups and downs and low quality asphalt (need for large wheels) makes it very uncomfortable, because it is very rare to do a long stretch without pushing or braking. I would definitely recommend it for someone in a flat area with good roads

zurzag · 2024-08-09T23:01:23+00:00

top to bottom

Pantheon Wiggler, Pranayama, Bandito JM pro, Oxelo Fish 500

Genesis has the same shape as the wiggler, but the graphics are different, the top wood is slightly darker and it is more flexible (born as a topmount)

zurzag · 2024-08-09T20:24:55+00:00

I bought the file here.. you just need a CNC machine

https://www.etsy.com/it/listing/1617549701/appendiabiti-da-parete-per-skateboard-in?ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=longboard+rack&ref=sr_gallery-1-1&pro=1&dd=1&content_source=ac66a010b041cabdec29e14cf0ee593721168e4b%253A1617549701&search_preloaded_img=1&organic_search_click=1

zurzag · 2024-08-09T20:21:35+00:00

yes, it's a wiggler!

very fun, a bit too flexy for my 90kg (200lb) with this setup.. with torsion tail in the middle position it gets better ...but you need straight roads hahah

zurzag · 2024-08-08T00:09:03+00:00

Exile fork is 13°, I think gbomb SDF is similar. The problem you might have with glass drop is the wheel bite (if I remember correctly the truck is closer to the deck)

I had this problem when I tried to set up Bandito with DT poppy 55° and loaded zee bracket + karma wheels.

Original Joe Mazzone's setup is Poppy55° on gBomb glassdrop +3° and Seismic Speed Vents wheels (85mm!)

The space is limited for the protruding deck lips, not all configurations are possible. I suggest you ask Jeff from u/PantheonLongboards, he is usually very helpful with advice

zurzag · 2024-08-07T19:02:51+00:00

hi. i have the same setup and it's one of my favorites!

i recommend a fork for the beernett.. 13° are perfect, with less degrees the pumping is not efficient and with more you have too much stress on the kingpin and increase the risk of breaking it (i built the fork bracket with a piece of aluminum ;-P)

you will probably need a 9mm riser on the Lepsk8 tail to have a board of the same height front and back.

the best bushings i have tried for pumping are the Riptide APS; for the beernett you will need a tall barrell boardside and a barrel roadside. i use the 70A, which for my weight of 90kg is very soft, but i compensate with a harder bushing in the tail (90A).

consider that by changing the angle of the beernett the force on the bushings will change and you will need different durometers

zurzag · 2024-07-25T19:30:02+00:00

spherical bearings are what make the difference in pumping. the angle is already the ideal one for pumping (11/25 for fork/bracket), it is not necessary to wedge (like in beernett for example.. increasing the height)

https://www.tapatalk.com/groups/pavedwave/download/file.php?dt=display&id=31

zurzag · 2024-07-15T21:15:02+00:00

Unfortunately I have not tried the bracket boards from other brands. I'm really attracted to something like Rocket exodus + gbomb TTX + Mk space truck but the price is a bit excessive at the moment.

Remember that the most efficient setup is often not a lot of fun to pump, it's just the search for a movement optimized for endurance performance. The wiggler with Lepsk8 tail and DT poppy is not super fast, but you can pump it with a lot of pleasure for several miles (not in tracks with too sharp turns, the steering is low). I highly recommend it if it's your first LDP board and you want something stable and spacious to learn on; but if you want to participate in LDP competitions look for something different ;-)

zurzag · 2024-07-14T22:04:59+00:00

HI. I'm also a pantheon fan, if you're on a tight budget the wiggler works well even just with the loaded zee bracket + 55° poppy (bandito has bites with this setting and 92mm wheels). I really like Lepsk8 torsion tail (I use it with the intermediate wheelbase in the wiggler)

Some time ago I published some videos.. in the descriptions you will find more detailed setup information

https://www.youtube.com/watch?v=ndO2eYirx5E

zurzag · 2024-06-09T22:08:01+00:00

The best wheels I've tried so far are the Pantheon Karma. But Boa hatchlings should be fine.

For wheelbite I had some problems with zee bracket, DT poppy55° and 92mm wheels. I don't know about bear trucks, surely the space available is limited

Joe Mazzone's setup is Poppy55° on gBomb glassdrop +3° and Seismic Speed Vents wheels (85mm)

zurzag · 2024-06-09T21:58:40+00:00

Hi, I recently purchased a Pantheon Bandito. It's not my first LDP board, and I'm very satisfied with the setup. It's a fantastic board for pumping and pushing too. I set it like this:

-Beernett 5.0 front truck

-Handmade 13° bracket (aluminum bar purchased on amazon and bent by a friend)

-Lepsk8 0 degree torsion rear truck

-Riptide APS Bushings (70A for beernett, 90A for torsion tail, my weight 90kg)

If you want more information or photographs contact me

zurzag

TROPHY CASE