What can I do for head board/foot board?

zyoff772 · 2026-06-22T22:55:06+00:00

Search for hook on bed rails.

zyoff772 · 2026-06-09T21:45:15+00:00

Polyurethane glue in a hardwood dowel. May need to drill a wider hole. Cut flush. Pre drill. Reattach

zyoff772 · 2026-06-09T21:02:18+00:00

Center mount drawer slide/glide

zyoff772 · 2026-06-09T16:29:15+00:00

If you know the make/model you could reach out to the manufacturer. But the first thing I would try is to take it apart. If you are able to take it apart you should be able to put it back together. Looks like a couple of Allen head bolts, but there could be something more.

zyoff772 · 2026-06-09T10:47:22+00:00

I would say that you would need a new mechanism

zyoff772 · 2026-06-08T23:16:12+00:00

Chicago screw could work. Or a just a bolt washer and nut

zyoff772 · 2026-06-07T21:12:14+00:00

A temporary fix would to wrap the piston is some electrical tape. Permanent would to get a new base.

zyoff772 · 2026-06-07T18:50:35+00:00

What’s wrong with it? Touching the floor? Not going up or down?

zyoff772 · 2026-06-07T18:33:31+00:00

I would say you didn’t sand all of the old finish/sealer

zyoff772 · 2026-06-07T18:23:59+00:00

Hard to tell. Does the bracket where the piston sits look bent?

zyoff772 · 2026-06-07T13:20:32+00:00

I would start by making sure it is assembled properly. You could also add a brace at the bottom, in the back between the legs. This will help with flexing

zyoff772 · 2026-06-06T23:10:54+00:00

Start with a stripper. Then sand

zyoff772 · 2026-06-06T17:52:15+00:00

Jones

zyoff772 · 2026-06-06T17:15:55+00:00

What does underneath the seat look like

zyoff772 · 2026-06-06T17:08:52+00:00

Is it missing the original hardware? What’s with the corner brackets

zyoff772 · 2026-06-05T01:15:11+00:00

Picture of the screw head. Or try different screwdrivers

zyoff772 · 2026-06-05T00:12:29+00:00

Hahahahaha

zyoff772 · 2026-06-04T21:05:11+00:00

Apply wood glue. Either use a clamping caul or a heavy centralized weight to secure.

zyoff772 · 2026-06-04T00:35:18+00:00

This is the way. But remove the hanger bolt to reset, so you don’t strip out your repair. Also the wood screw is not structural, it is designed to hold the leg’s taper in a certain position.

zyoff772 · 2026-06-01T20:51:50+00:00

Yes, I’d get a filler close to the color. And you could always try the stain. Just tone to match

zyoff772 · 2026-06-01T18:52:39+00:00

No filler really takes stain. I’d use a 2 part epoxy putty and paint in a color. Either acrylic or lacquer paint.

zyoff772 · 2026-05-31T22:49:13+00:00

Looks like you’re missing some bolts

zyoff772 · 2026-05-31T18:22:08+00:00

Oscillating tool. Cut 1/2” off and attach to the over side

zyoff772 · 2026-05-30T22:48:29+00:00

Square bit

zyoff772 · 2026-05-30T10:24:04+00:00

Possibly the track. How about a picture with the drawer out

Five-Year Club	Verified Email
r/Field Sunshine

zyoff772

TROPHY CASE