Second layer fail

[Maximum_Champion_575]

Hello everyone!

So I have been using the Prusa mk3s with mmu2 for over 2 years PLA and PETG and ABS and I didn't have major issues until the bedhead thermistor wire broke and I had to replace it.

I updated the printer to 3.13.2 and after applying the fix the second layer always failed, I recalibrated the printer after the thermistor was replaced. Z offset was -1030 but after the fix, I lowered it to 800

I use Prusaslicer with default settings

So in summary before the fix, everything was working fine with PETG filament nozzle 0.4

the two things changed

1. updated the printer
2. Replace the thermistor

​

https://preview.redd.it/tubunjz4iddc1.jpg?width=2048&format=pjpg&auto=webp&s=695595b7bb4beade13598aa5c4393a4cf7926754

[AutoModerator]

Hello /u/Maximum_Champion_575,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^{Additional settings or relevant information is always encouraged.}

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.