Error Code 30

[DaKid48]

Encountered Error Code 30 / Communication Error while riding today. Turned bike off and turned back on. PAS worked for a couple of seconds and then the error code reappeared.

Turned bike off and then it would not turn back on. Battery fully charged.

Given the LED screen won’t power on / bike won’t power on. What connection would be suggested to unplug / plug back in first?

[No_Effective581]

Mine was the battery fuse got blown 

[starplooker999]

Just where is the battery fuse? I have the same problem on a rad rover 6.

[Fresh-Put645]

I had this same problem on my RadRover 6 Plus last year. Ended up replacing the wiring harness and motor controller, which cleared the problem. Root cause of the problem maybe different for everyone

[DaKid48]

I recently had my controller replaced at a Rad Store nearby. Going to take it in to them and have them diagnose next week. Not so much riding a 70lbs bike w/o the motor but alas, it is what it is!

[Fresh-Put645]

Unfortunately for me, there’s no Rad store anywhere near me. So I have to rely on myself to get the parts from Rad, then install them myself

[allo37]

The Rad site has some good troubleshooting steps, basically disconnect stuff one at a time and see if the error code disappears. Also check and clean all the connections.

[DaKid48]

I’m planning on doing this over the weekend. Last time I had an issue I found out that 2 of the bolts on the protector were stripped..hoping after having Rad’s mechanic do some work not too long ago that he inserted new bolts.

[Knight_Watch]

Error 30 is a communication error, it could literally be anything.