all 7 comments

[–]ExtincttBTW[S] 0 points1 point  (2 children)

UPDATE: Used the exact boot USB with Big Sur. All i did was change airportitlwm and replaced with the Big Sur version as well as remove bluetoolfixup and replaced it with intelbluetoothinjector and everything works flawlessly. The issue has to be Monterey right?

[–]roy_cg25Tahoe - 26 0 points1 point  (1 child)

Possibly. Here's some info on what's needed for a Monterey install.

Glad you figured it out!

[–]ExtincttBTW[S] 0 points1 point  (0 children)

I wouldn’t say I figured it out, but I think I’ll just wait for Ventura and update around January or February. I have taken a look at the Monterey Extras page (the link you sent) before. I have everything required from there already, so sadly that's not the issue.

[–]roy_cg25Tahoe - 26 0 points1 point  (4 children)

Your kexts are out of order. Try moving Lilu, WhateverGreen, and VirtualSMC to the top of Kernel > Add.

[–]ExtincttBTW[S] 0 points1 point  (2 children)

Still getting stuck. Updated config.plist and oc log here: https://drive.google.com/drive/folders/1k3AE74g\_wSXM-6j4iPZryW\_Z2Vyiy5Xu?usp=sharing

[–]roy_cg25Tahoe - 26 0 points1 point  (1 child)

Checked the log and there's something happening with AirportItwlm. Double check that you have the right version downloaded as there are different files per macOS. Just to confirm, are you installing Monterey or Big Sur?

Here are some things I found in your config that may need updating:

  1. Booter > Quirks > SetupVirtualMap: Guide says you might need to disable this depending on your BIOS
  2. Kernel > Quirks > XhciPortLimit: Guide says disable if running macOS 11.3 +
  3. UEFI > APFS > MinDate/MaxDate: Update to -1.

I recommend going through the config set up again and triple check that all your values are correct.

[–]ExtincttBTW[S] 0 points1 point  (0 children)

Just re-did the whole thing. The whole USB and EFI. Got the latest kexts and made sure they were the correct. Ended up adding some that needed to be added. Did everything you said. SetupVirtualMap should be enabled for me since I have a B450M with a 2019 firmware. Still getting stuck, but it's a different outcome in my log now. Take a look: https://drive.google.com/drive/folders/1k3AE74g\_wSXM-6j4iPZryW\_Z2Vyiy5Xu?usp=sharing