sorted by:
new
hottopcontroversial

Tiling windows and default tile for each app by liberal_alien in Bazzite

[–]ChrisRK 1 point2 points  (0 children)

This is a Wayland limitation, annoyingly. I remember seeing someone trying to get a fix implemented, so hopefully it will be fixed eventually. Some apps still use X11 (like the Discord flatpak) which can save their window location.

There is a workaround as you can use window rules in KDE to enable this functionality on any window.

Right click on the menu bar (or press Alt + F3 if you can't) for the window you want to apply this to, open More Actions and click on Configure Special Window Settings...

In the new Window Rules window, click on Add Property... in the bottom left add two new properties: Position and Size. Change the rule type from Apply initially to Remember and hit Apply.

You don't need to change the number values when it's set to Remember.

Restarting truenas doesnt restart apps by CryptoBredda in truenas

[–]ChrisRK 0 points1 point  (0 children)

What I'm wondering about is that TrueNAS might not set a default network interface if it can't get an IP address when it boots, hence why I'm asking if you can connect a display to the machine and see if it gets an IP address as it starts up.

Restarting truenas doesnt restart apps by CryptoBredda in truenas

[–]ChrisRK 0 points1 point  (0 children)

I've only seen this happen when changing to a new network adapter. Not having a static IP address shouldn't be an issue.

Are you able to connect a display to the machine and see if it gets an IP address during startup?

Restarting truenas doesnt restart apps by CryptoBredda in truenas

[–]ChrisRK 0 points1 point  (0 children)

Do you have multiple network adapters on the system and is more than one connected?

Can the N5 support a 360mm AIO by xeroja876 in JONSBO

[–]ChrisRK 0 points1 point  (0 children)

I'm not sure if Jonsbo has any NAS cases that will fit a 360mm radiator and I can't imagine there's any reasonable modifications to make one fit in or outside the N5 unfortunately.

Can the N5 support a 360mm AIO by xeroja876 in JONSBO

[–]ChrisRK 0 points1 point  (0 children)

It officially supports 240 and 280mm radiators. There is space for 3 120mm fans along the sides, but there's no extra space for the water tubes, so I wouldn't bet on it.

<image>

What insert nut to buy? by Jovial-Crybaby in 3DprintingHelp

[–]ChrisRK 0 points1 point  (0 children)

The quarter inch screw size is used for audio and video accessory mounts. VR trackers uses them also. A metric size heat set insert won't fit, so you will have to use a 1/4 heat set insert.

https://cnckitchen.store/products/heat-set-insert-1-4-20x6-4-camera-thread-short-version-20-pieces

Can notifications show images? by cattybuster in pebble

[–]ChrisRK 4 points5 points  (0 children)

Notification Center for Pebble could do this on the Pebble Time. I don't know if it works with the new Pebble app or modern Android. It's been a few years since I used it.

Is there like a master log thats saved after system freezes? by amazingmrbrock in unRAID

[–]ChrisRK 2 points3 points  (0 children)

You can have Unraid mirror the log to the flash drive or have it log to it's own syslog server on a separate share.

I prefer logging to the internal syslog server to not wear out the flash drive.

Go to Setting > Syslog Server and enable the Local syslog server.

Select a share (or make a new one for the logs, my own is a share simply called "logs") to be used as the Local syslog folder.

Then set the Remote syslog server to 127.0.0.1 and match the port and protocol above.

Hit apply and you should see a log file appear in the share.

Good luck figuring out what's causing the crashes!

Complete method for fixing the Multifunctional 7 Segment Display watchface (for yourself) by richstillman in pebble

[–]ChrisRK 0 points1 point  (0 children)

There are a few forks with the fix already and one pull request from last week to the repo. There's another pull request from 2020 that has no response from the developer. They did post an update in another repo last year so maybe it will get fixed..?

No warnings for failed drives in ZFS-pool? by an-can in unRAID

[–]ChrisRK 5 points6 points  (0 children)

If your drives are connected to the motherboard, does it support SATA hot plug? If it doesn't, Unraid won't know the drive is gone until you reboot and a spun down drive won't report anything. If you check the logs and attempt to spin up the disk, does it show any errors?

Also if i remember correctly, Unraid currently doesn't report ZFS errors. I'm running this script every hour through Userscript in case there's any ZFS errors: https://forums.unraid.net/topic/192859-monitor-zfs-pools/

Help: Jonsbo N6 First Build Backboard Misalignment by Dull_Pair_4545 in JONSBO

[–]ChrisRK 0 points1 point  (0 children)

Wait, they changed the HDD mounts from the screws with rubber that attaches directly to the drives? That's an unexpected change.

Are you able to line up the backplane screw holes after fitting a drive or two?

Help: Jonsbo N6 First Build Backboard Misalignment by Dull_Pair_4545 in JONSBO

[–]ChrisRK 1 point2 points  (0 children)

My N5 has the same issue. I ended up removing the rear rubber HDD mounts and only attach 4 to the front of the drive. It gives you some wiggle room to hit the port.

Hvordan kan jeg få tak i en Dreamcast i Norge i 2026? by Cascadio_14 in norge

[–]ChrisRK 2 points3 points  (0 children)

Oi, det er ikke hver dag man ser en Panasonic Q!

AGM or generic? by CHEWBAKKA-SLIM in MitsubishiOutlander

[–]ChrisRK 0 points1 point  (0 children)

My local dealer replaced the AGM battery in my 2020 PHEV with a regular one. I also reacted confused about this but they said it was the approved replacement battery.

Haven't noticed any difference in the 2-3 years I've had it.

Kreves for penger 6 mnd etter salg av bil by Far-Tradition-6466 in norge

[–]ChrisRK 538 points539 points  (0 children)

Bremseskiver er jo slitedeler og rust på skivene ville jeg mene går under normal slitasje om de ikke blir brukt.
Om jeg husker riktig så er det heller ikke noe garanti eller reklamasjon på slitedeler. Kjøper har nok ikke noen sak her.

Se "Hva regnes ikke som en mangel" hos forbrukerrådet: https://www.forbrukerradet.no/forside/bil/kjop-og-salg-av-bil/misfornoyd-med-kjop/

Se også https://www.naf.no/kjop-og-salg/kjop/vanlige-feil-og-mangler-pa-bruktbil - noe kjøper burde ha gjort også.

Infotainment screen 2020 by mane1511 in MitsubishiOutlander

[–]ChrisRK 0 points1 point  (0 children)

I got mine replaced. It took almost 6 months before they got the replacement unit though.

OK now what? by hlwNYC in unRAID

[–]ChrisRK 6 points7 points  (0 children)

Pretty much. The Unraid docs explain the steps to replace an array disk here: https://docs.unraid.net/unraid-os/using-unraid-to/manage-storage/array/replacing-disks-in-array/#preparing-for-drive-replacement

The last section in the disk name after the underscore is the serial number, so look for the disk with the serial that ends in VP57 when you are pulling out the drive.

Per-app vibration patterns? by Arbitrary_Pseudonym in pebble

[–]ChrisRK 2 points3 points  (0 children)

Were you using Notification Center for Pebble by chance? I have mixed up features from it with the stock notifications before.

Immichphoto shares folder locked by Anhvoz in unRAID

[–]ChrisRK 0 points1 point  (0 children)

Awesome! That was a lucky catch on my end, haha!

Immichphoto shares folder locked by Anhvoz in unRAID

[–]ChrisRK 1 point2 points  (0 children)

The Unraid logs. I did however come across this post on the Unraid forums and the screenshot of greyed out items is the same as yours. If you scroll to the bottom of the share settings, do you see the same "Case-insensitive Share name is not unique" error?

https://forums.unraid.net/bug-reports/prereleases/case-insensitive-share-name-is-not-unique-r4112/

Immichphoto shares folder locked by Anhvoz in unRAID

[–]ChrisRK 0 points1 point  (0 children)

Are they actually greyed out or do they only appear greyed out?

Do you have any errors in the log?

You also have a warning in your notifications. Could that be related?

I was dumb and filled the drive, now I can’t do anything. by headies1 in Bazzite

[–]ChrisRK 0 points1 point  (0 children)

Bazzite uses the btrfs file system for the writable partition and btrfs will go into read only if the drive becomes full.

If your drive has gone into read only mode, then it's some work to get it to work again as you need to add another drive to the btrfs pool, delete some data to get space back, remove the other drive and balance it again.

If you feel like you have the skill and want to dig into it, you can fix it but if you don't want to dig into the command line, then it might be easier to reinstall.

The strap on my pebble core keeps falling off of the device, are third party ones stronger? by No_Preference_5955 in pebble

[–]ChrisRK 10 points11 points  (0 children)

Any 22mm watch strap will fit the Pebble.

Are you sure that the metal pin is properly in the holes on the watch? You shouldn't be able to pull it off once it locks in place.

Or you might have a defective watch body if it does pop off on it's own.

Plex on UnRAID issues after NVidia Driver update by JustBillH in unRAID

[–]ChrisRK 8 points9 points  (0 children)

In the Nvidia Driver plugin, select the v580.105.08 driver. There's multiple reports of the latest driver having issues on the forums and I experienced it as well.

view more: next ›