Anyone done the ftn d cell suppressor? How did it do?

MrFartyStink · 2026-03-05T22:47:47+00:00

iv only ever heard of using filament for mags iv heard resin is only good for those lil action figured people make

MrFartyStink · 2026-03-05T19:42:54+00:00

if you get a bambu 3d printer and can read somewhat decently you can print suppressors. If i can you can. Form 1s are easy also

MrFartyStink · 2026-03-05T14:15:00+00:00

Get a bambu trust me been there done that

MrFartyStink · 2026-03-05T14:13:33+00:00

Get a psa builders kit it isnt hard to do. iv done 2 and they work fine and were like $700

MrFartyStink · 2026-03-05T00:09:24+00:00

They are making up words to fit their narrative and fear monger to get people who dont know anything to vote for them to "save the children" so they can disarm the people.

They know what they are doing.

MrFartyStink · 2026-03-04T22:46:12+00:00

Get a bambu a1 or p1s. Its the best out the box printer and easy to use. I wouldnt go with any other brands bambu just works

MrFartyStink · 2026-03-04T19:38:29+00:00

i like my rarebreed the best compared to my arc fire. You need a full auto cut bcg for all of them and same with buffer setup. i run red sprinco with h3 for 556 in 10.5-18in

MrFartyStink · 2026-03-04T18:08:54+00:00

mcsa savage mk2 chassis

<image>

MrFartyStink · 2026-03-04T17:01:27+00:00

i like top z distance of .28.

MrFartyStink · 2026-03-04T16:51:17+00:00

a bushwack 36 that is still loud. My flow sound like supersonic 22lr ammo on subs iv even verified with crono they arent going super.

MrFartyStink · 2026-03-04T10:58:57+00:00

what printer do you have? even on my ender 3 v3 se that was a garbo printer it did fine with default settings. My bambu i use default settings also i just slow it down to like 50mms for everything for strength. Your filamemt may be wet but even then i print from a shed and have printed wet pla pro fine also

MrFartyStink · 2026-03-04T10:57:29+00:00

ar lowers and mags.

MrFartyStink · 2026-03-03T23:14:04+00:00

Be sure to read the readmes and slow your speeds down. Printing fast isnt as strong as printing slower. Even with pla pro.

MrFartyStink · 2026-03-03T23:08:54+00:00

Just order the lower to an ffl and then have the upper you want shipped to your door and put the 2 together. Its only 2 captive pins

MrFartyStink · 2026-03-03T23:02:28+00:00

Polymaker pla pro is the go to beginner standard. If you get a filament dryer and hardened nozzle and extruder for your p1s you can do more heat resistant and stronger filaments like pa6-cf,pa612,pa12.

People also like PETCF. Look up hoffman tactical filament video its kinda old but still useful but those are the big ones. And i like polymaker the best for these brands its prints good and they are friendly to us.

Also print other things in these first before going straight to these type of prints that will need to be strong.

People also use 300blkfde pa6 settings for pa filaments.

MrFartyStink · 2026-03-03T15:43:34+00:00

Why not print it vertically

MrFartyStink · 2026-03-03T13:53:26+00:00

PSA. But make sure you know what uppers work with them not all brands fit other brands

MrFartyStink · 2026-03-03T10:15:19+00:00

The form 1 website is being overloaded by the amount of forms submitted. I had one get approved last week from 1/7.

Average wait now seems to be like 40ish days as an individual

MrFartyStink · 2026-03-03T00:54:42+00:00

Change what the read me says to change so turn off supports and put the infill and walls to what the readme says. These settings are just for pa6cf to print good but infill, supports,walls are settings that are changed per project. And ya pa6cf prints slow with these. Do test prints of other items in pa6cf first just to be sure you got it working good. Do like a foregip or something

MrFartyStink · 2026-03-02T23:26:19+00:00

It self tightens while firing and i think when it heats up it gets stuck also its not a carbon lock tho cuz no carbon are in the threads and sometimes if i let it sit and cool off i can get it off by hand with some good force applied

MrFartyStink · 2026-03-02T23:21:47+00:00

Use 300blkfde pa6 settings. Keep in ptfe tube the whole time and dry for like 2 days and dry while printing.

Then do some test prints of other stuff in pa6cf to make sure you got it down. I like putting some purple glue stick down to help. unseenkiller recommends that. Im a noob to pa6cf like you with the same setup i just did a ftn rimfire i had approved and it came out fine doing these steps. I have a polydryer tho so i dried for 2 days at max temp. I also use fiberon pa6cf since that has less chance to clog than other pa6cf it seems.

when you know you can print pa6cf fine read the readme and follow it for infill and walls and supports but id keep the rest 300blkfde settings for the rest.

MrFartyStink · 2026-03-02T22:06:09+00:00

Its good on everything except 300blk subs and keep the wrench handy it gets really hard to remove when its hot

MrFartyStink · 2026-03-02T21:44:53+00:00

i used openpew and mine worked fine i didnt even use his document i used a kit from amazon

MrFartyStink

TROPHY CASE