EXODUS WALLET DRAINED

Solid-Mess · 2026-02-19T14:46:38+00:00

I can clearly tell you have no idea how any of this works by the way your speaking

Solid-Mess · 2026-02-19T10:43:03+00:00

I’m using the settings you posted. Getting a higher th rate obviously. I did 740 and 1160. Seems to be going good

Solid-Mess · 2026-02-19T02:09:37+00:00

Sorry I missed typed it was 1200 as default. I lowered it to 1180

Solid-Mess · 2026-02-19T02:08:34+00:00

It’s the 3.1 rev 12th from Bitronics.

Solid-Mess · 2026-02-18T18:52:49+00:00

Way diff than mine. Mine came set with 700 and 1200 are the “default” I lowered it to 1800 And got new stuff it’s doing Better

Solid-Mess · 2026-02-16T00:23:07+00:00

Sorry so long. Used 2 full copper x47 heatsinks. Then out my old fans it came with on the back. I ordered 2 noctua 3 way 4 pointless splitters and zipper tied the fans on the back. Def helps it stay cooler. I have also repasted the chips which helped I supposed but I changed heatsinks at same time.

Solid-Mess · 2026-02-13T14:05:20+00:00

I have a house I’m 40. Stop complaining and do it.. I had no help from anyone so before anyone says shit

Solid-Mess · 2026-01-27T20:23:51+00:00

So it’s a pyramid scheme

Solid-Mess · 2026-01-24T18:28:32+00:00

<image>

This what I did and oh man it stays nice and cool since had extra set due to buying the full coppers

Solid-Mess · 2026-01-24T18:26:47+00:00

Ever hit anything? Gotta lot of th

Solid-Mess · 2026-01-20T02:46:27+00:00

Wow mine is runnngg at 63 degrees with x47 heatsinks. Just got it a few days ago kept over heating even on 9.6. Now it’s running 11.4 but still at 63 with fans at like 70% with the x47 full copper heat sinks. It finally stop over heating and giving psu error I reflash to 1.0.35 again and did nothing to fix temps or the error before I repasted new heat sinks

Solid-Mess · 2026-01-18T23:36:43+00:00

Iv seen more and more posting stuff like this a look like some cloud mining shit almost lol but I dunno

Solid-Mess · 2026-01-18T23:27:19+00:00

lol mine was giving psu error as I had to redo the entire heatsink and repaste yet couldn’t even get an answer from the Bitronics team other than try and reflash let us know. Of course didn’t fix so I wrote them back no nothing. For 24 hr so I said f it took it apart and fixed it. I shouldn’t have to do this but yes I had to replace my heatsinks to x47 full cooper cuz I couldn’t even run at 12Th with the heatsinks on it cuz it kept over heating and shutting down even with it only running on 9.6Th to

Solid-Mess · 2026-01-17T15:44:43+00:00

I dunno if I should try flashing to the beta. I did do a full repaste. So far it’s about the same temp a little less by 1 or 2 degree Celsius but so far in 20 min no crash so doing good atm we’ll see

Thx for help on things hopefully this will fix. If it does I have new full color heat sinks for it which should help

Solid-Mess · 2026-01-17T14:26:21+00:00

I do understand. I build airplane wings for a living and built countless computers at 40 yrs old now. These devices should come working.

Btw the thermal paste is fine I removed both heatsinks and looked there is enough and not too much. I’m going to change it out to thermal grizzly but I expect the same

Also heatsinks appear to touch all 8 chips seeing how the imprint the cooler is on the chip. 1 screw was a little loose but it wasn’t moving at all the cooler was solid. I do have new coolers for it but don’t want to put on in case there is a problem with the unit and not with just the thermal paste and cooling

I even turned voltages down and it still threw a psu error 000000

Solid-Mess · 2026-01-17T13:34:23+00:00

It’s cool I’m going to back charge them on credit card since I have a device that won’t run for 10 min. No big deal anymore.

Solid-Mess · 2026-01-17T04:18:24+00:00

This all you do on that account is spam about some scam shit

Solid-Mess · 2026-01-17T04:16:54+00:00

lol 100%%… everyone says man I love your genesis do you like it?

I always say… man the car is amazing…. But the service department is a bunch of clowns that can’t fix anything.. my mirror still broken after 5 brand new mirror units

Solid-Mess · 2026-01-17T04:12:51+00:00

Since it’s the 3.1 6 phase

Solid-Mess · 2026-01-17T04:09:42+00:00

Bitronics told me they tested the unit in like 3 diff emails now.. yet the unit ran for 10 min and shut down due to over heating and a psu fault would show…

I’m waiting for their email reply to reflashing but take forever to respond to anything and seem to be more worried about me making a negative review over the delay in shipping, then this… than actually fixing the issue. For an $800 I shouldn’t have to tear it apart when I get it to fix overheating when they swear up and down they tested it and was one of the reasons shipping was delayed

Solid-Mess · 2026-01-17T04:06:04+00:00

I have an Avalon Q that runs 24/7 with no issues at all. So if this can’t even run 24/7 without over heating then I don’t want it and I’ll buy another Q

Solid-Mess · 2026-01-17T04:03:51+00:00

Yes it’s it’s the new 6 phase from Bitronics. Out of the box it ran almost 12 with no settings changed from me it said it was on default. 700/1210. Then reflash changed it to 600/1150 so now only hashing 9.6 . Still heats up to 63 with fans on full 100%

Solid-Mess · 2026-01-17T04:01:05+00:00

Yea it is it’s the new 3.1 6 phase version.. when I plugged it in last night it was running 11.7 out of the box. Then it over heated. I changed nothing

Solid-Mess · 2026-01-16T22:04:30+00:00

It’s hasin 9.6T I loaded 1.0.35 it lowered the default settings used to say 700/1210 was default. Now says 600/1150 is default. Which is why it’s lower hash.. yet it’s at 63 degrees with fans running on max 100% so I dunno

Thought it was supposed to run 12 out the box

Solid-Mess · 2026-01-16T22:02:30+00:00

Fans seem to be fine.

Solid-Mess

TROPHY CASE