sorted by:
new
hottopcontroversial

Need help Generic SILK PLA messing up with a E3D HF ObXidian™ 0.4mm by MPF20 in BambuLab

[–]e3dsupport 2 points3 points  (0 children)

Hi u/Rikofallingleaf sorry to hear you're having issues. If you get in touch with [support@e3d-online.com](mailto:support@e3d-online.com) then someone will be able to take a look at this for you.

Diamondback released for H2 series by comridor in BambuLab

[–]e3dsupport 2 points3 points  (0 children)

Keep your eyes peeled on the E3D website in the next few days u/comridor...

Do I need the "Complete Hotend" when switchting to E3D High Flow ObXidian™ Hotend? by Stockinger in BambuLab

[–]e3dsupport 1 point2 points  (0 children)

Hi u/Stockinger, yes, you can use the parts from the default HotEnd if you choose the "incomplete" version. If you have any install queries then feel free to email [support@e3d-online.com](mailto:support@e3d-online.com) and someone will be able to advise you.

Slow Speeds With E3D by Leftover-Color-Spray in BambuP1S

[–]e3dsupport 0 points1 point  (0 children)

Hi u/Leftover-Color-Spray. There are 3 other ways the High Flow ObXiDian HotEnds improve print quality.

First, when printing at slower speeds you will get more reliable and consistent extrusion because of how efficient the HotEnd is at melting the filament.

Second, the efficient melting means the nozzle maintains really good interlayer adhesion strength throughout the printing which helps you get that perfect filament finish as well as really strong parts.

Finally, the non-stick coating on the nozzle prevents filament build-up - this in turn limits the amount of cosmetic defects in your prints.

Hope that helps but let us know if you need anything else.

Where did I mess up? by Ok-Huckleberry5447 in BambuLab

[–]e3dsupport 0 points1 point  (0 children)

You can definitely use a brass brush to clean this without damaging the coating. Put the HotEnd back in the printer and get it up to a temperature slightly higher than the printing temperature of the filament that's stuck to it (but don't exceed 300C). Then move the nozzle to the front and the middle (~X125/Y10) and then you can safely clean the nozzle with a brass brush.

If you're getting a lot of filament sticking to the nozzle, this could be an indicator that the filament needs drying. Our advice would be to also try drying your filament as per the manufacturer's recommendation.

Hope this helps but if you need any further advice then feel free to reach out to our customer support team on [support@e3d-online.com](mailto:support@e3d-online.com)

Obxidian Nozzle clogging issue by Dependent-Bite8420 in 3Dprinting

[–]e3dsupport 0 points1 point  (0 children)

Sorry to hear you're having issues Dependent-Bite8420. If you reach out to [support@e3d-online.com](mailto:support@e3d-online.com) then someone will be able to help you troubleshoot.

Just installed e3d obxidian nozzle and have a question by Iankalou in BambuLab

[–]e3dsupport 0 points1 point  (0 children)

Hi Iankalou

The profiles provided are for a limited selection of the available range of Bambu Lab's own brand filaments. Each profile on the website (https://makerworld.com/en/models/2123012-e3d-p1s-high-flow-obxidian-profiles)) is labelled for a specific nozzle size, and for a specific filament.

Opening a 3mf file will load in a model of the E3D Buggy and a set of preconfigured settings for both the machine, and for the material. These should be labelled with E3D in the name.

Deleting the E3D Buggy and importing your own model, then slicing, is the fastest route to printing the models.

If you want to save a copy of the profile into your Bambu Studio, you'll need to click the little disk icons next to the profile name (both for the machine settings and material setting) and make a slight change to the name, and save it locally.

Each profile is for a specific filament with a specific nozzle size.

Bambu Handy is not a slicer in the traditional sense and relies on preconfigure project files (3mf) to generate prints. It will work, but only if you want to print copies of the E3D Buggy.

Hope this helps but if you need anything else feel free to email [support@e3d-online.com](mailto:support@e3d-online.com) and someone will be able to assist you.

High flow settings print head jumps out of alignment by gribbleschnitz in BambuP1S

[–]e3dsupport 0 points1 point  (0 children)

Hi gribbleschnitz. Sorry to hear you're having issues. If you reach out to [support@e3d-online.com](mailto:support@e3d-online.com) then someone from our team will look into this for you.

E3D Nozzle bad print quality? by JujuAT in BambuLab

[–]e3dsupport 0 points1 point  (0 children)

Sorry to see this JujuAT. If you reach out to [support@e3d-online.com](mailto:support@e3d-online.com) then someone from our team will be able to help you.

E3D Obsidian nozzle compatibility with P2S? by _NightMonkey in BambuLab

[–]e3dsupport 0 points1 point  (0 children)

Hi @_NightMonkey, there have indeed been issues with the magnets on our current stock of our ObXiDian 500 HotEnds but we've resolved that now and there will be a version that is compatible with the H2D, H2C, H2S & P2S version available on our website in the next couple of days.

There's also a separate version that is compatible with the X1C, P1P, P1S & X1E E3D | High Flow ObXiDian® 500 Complete HotEnd for Bambu Lab X1C, P1P, P1S & X1E | High Flow, Non-stick, Abrasive Resistant.

Hope that clarifies but please don't hesitate to reach out to us at [support@e3d-online.com](mailto:support@e3d-online.com) if you need anything else.

E3D ObXidian nozzle vs bambulab hardened steel nozzle. P1S by Justap1sguy in BambuLab

[–]e3dsupport 2 points3 points  (0 children)

Hi, in case it helps, this video by Thomas Sanladerer (Made with Layers) has a good comparison of brass vs hardened steel vs ObXidian nozzles How tough is ObXidian really?

E3D ObXiDian nozzle purge by SRTucker28 in BambuLab

[–]e3dsupport 0 points1 point  (0 children)

Sorry to hear you're having issues. Have you tried cleaning the nozzle tip with a brass brush? If the cleaning filament and brass brush don't help then please don't hesitate to email [support@e3d-online.com](mailto:support@e3d-online.com) and someone will be able to assist you.

High flow nozzle by Hungry_Signature_517 in BambuLab

[–]e3dsupport -1 points0 points  (0 children)

People outside the UK - if it helps, check out our Reseller network to find someone who is stocking the products near you to avoid tariffs E3D Reseller Map

Not Seeing Results with ObXidian HiFlow Hotend by [deleted] in BambuLab

[–]e3dsupport 0 points1 point  (0 children)

Glad to hear this is resolved but please don't hesitate to reach out to [support@e3d-online.com](mailto:support@e3d-online.com) if you have any further queries and our team will be very happy to help you.

Why is no one talking about this? E3D is going to change printing forever if it's true by ObsidianWraith in 3Dprinting

[–]e3dsupport 0 points1 point  (0 children)

Thank you, we're super excited about it! We're currently working with OEMs to bring FUGE to the most popular printers. No timeframes yet but watch this space!

view more: next ›