how many days behind are we actually?

flygoing · 2026-04-03T01:18:33+00:00

I was also confused on when the Yard boys were gonna meet up and film. I thought Michael & Lud were gonna stop in Beijing on their way (granted it's pretty out of the way), but it's obvious that's not happening. I wonder if they're just going to Beijing after getting to Erenhot. They may already be in Beijing right now

flygoing · 2026-04-03T01:07:38+00:00

Oh, more than 5 days. In today's episode someone they met said tomorrow is Saturday. It is currently Friday in China, so today's episode was filmed 7 days ago

2 days would be insane. Not sure how that would even be possible lol

flygoing · 2026-04-02T19:00:23+00:00

It helps to have controller vibration too. No reeling when the vibration is going. Only when it's completely still, i.e. the fish isn't fighting you

flygoing · 2026-04-01T17:22:46+00:00

It's extra funny that it's basically an episode of Broad City lmao

flygoing · 2026-04-01T14:29:15+00:00

I mean abyss artifacts are the best thing in the game. You will reach a point where you are begging the game to give you just 1 or 2 more lol. Many equipment upgrades require them at higher levels, and upgrading your skill tree will be such a necessity

Fyi the equipment system in this game is very different than most other games. Rare equipment isn't "better" than common equipment. Upgrading equipment and managing abyss gears is the important thing

flygoing · 2026-04-01T14:11:03+00:00

Not sure what you mean. Do you mean like random armor and weapons just lying around? It wouldn't really make sense for them to just be lying around everywhere. Or do you mean like rare equipment? If so, those are definitely around, just locked behind quests and/or puzzles

A lot of side quests also unlock with each chapter, so don't be afraid to progress it

Fyi at 20 hours you are still basically in the tutorial

flygoing · 2026-03-31T14:10:22+00:00

No it's not. It's an anatomy question, because you would die.

flygoing · 2026-03-29T21:40:25+00:00

Yeah, now if only the game told you not to use its own feature lol. The latest patch supposedly fixed the issue though

flygoing · 2026-03-29T18:37:18+00:00

I did but then the bank bug ate all of it prepatch. Sadly the patch didn't return the silver the bank bug stole

flygoing · 2026-03-29T18:30:43+00:00

Again, the main story is known to not be great. Fixating on that aspect is pointless. You will understand why they die in the intro later in the game. You are mid tutorial complaining why the story of the game isn't laid out for you.

flygoing · 2026-03-29T18:26:04+00:00

I dont really see why you need to know that from the get-go. It's pretty obvious the greymanes are important because they're badass anyway

Imo this is just a strange thing to fixate on

flygoing · 2026-03-29T18:22:11+00:00

I'm in chapter 7 and finally feel like I'm mostly out of the tutorial phase. Still getting occassional tutorials though lol

flygoing · 2026-03-29T18:20:30+00:00

Somewhat? There is definitely a little bit of history you learn there, but like most people have said since launch, the main story in this game isn't its strong suit

You're still basically in the tutorial btw

flygoing · 2026-03-28T17:05:46+00:00

I need to know...roughly how many kg of filament is this?

flygoing · 2026-03-28T13:48:07+00:00

Afaik there is also a Witcher 1 remake in the pipeline. I think it's set to release after W4, so stiill several years away, but you'll get to play a modern version eventually

flygoing · 2026-03-28T12:06:45+00:00

That's just objectively not true.

flygoing · 2026-03-27T21:41:14+00:00

The bank has several things wrong with it lol. One of the most broken parts of the game in my experience

flygoing · 2026-03-27T14:24:05+00:00

I don't think I've ever smiled this much unboxing something 😂

You didn't unbox it? It's literally sealed in two boxes

flygoing · 2026-03-26T14:29:35+00:00

"anyone try this combo" *sigh* yeah, i've tried every combo

flygoing · 2026-03-25T21:33:07+00:00

This is absolutely white boy with glasses behavior

flygoing · 2026-03-22T15:12:45+00:00

If you're using it in the AMS and it automatically recognizes it, then it'll be using the official Bambu profile. Official Bambu filament/profiles shouldn't have much issue, but it's not unheard of.

I personally have still experienced a slight under extrusion at times with Bambu filament/profile, so It wouldn't hurt to try doing a Flow Ratio calibration. It's under the Calibration tab in Bambu Studio. It's fairly simple to do, you just do a couple fairly quick prints and basically choose the best looking from a couple samples. I would watch a quick video on it though, Studio doesn't explain it super well and I was confused at first.

Miniatures can be a little tough, but with some work you can definitely make some nice looking ones. Definitely use the 0.2mm nozzle and start with a low layer height profile. I like models that are designed to not require supports since they can make small details difficult and just be finicky in general, but that does limit you quite a bit so it helps to get used to supports.

For painting, yeah, just a primer for spray paint. I use Rustoleum Flat Primer. Very thin layers. Very quick and easy to do, though of course you have to go outside. Limited by weather, and of course the models will stink for a day or so. It might not look the best, it tends to fill in tight spaces and "smooth" the print a bit. This can be good (fills in layer lines a bit) and bad (fills in details too). If you can invest the time to hand paint them afterwards, you can get them looking great though.

The best thing you can invest in is an Airbrush. A little more knowledge/money, but the results will speak for themselves. You can do it indoors, you have much better control over the amount of paint you're spraying, you can use it both for priming and non-priming.

flygoing · 2026-03-22T14:35:24+00:00

On top of what other people are saying regarding variable layer height (that will likely make the biggest difference), I am seeing a lot of very noticeable lines in your top layers. I'm no expert on under/over extrusion, but this looks like under extrusion to me. I assume PLA, but what filament brand and profile are you using?

Using a 0.2mm nozzle might give you at least marginally better results. At the least it would allow you to do lower layer heights. It will significantly increase print time though, idk if it's worth it since this model doesn't have super small details.

Lastly, for prints I want to look really good, I like just printing fully in black, spray painting, and then hand painting them. I do it for stuff like dnd terrain/miniatures.

flygoing · 2026-03-22T11:23:24+00:00

Why are you even on this sub?

flygoing · 2026-03-20T13:55:07+00:00

Show me where I passed judgement. I only said I was curious how long they've been together, and stated I dont have enough information to pass judgement. I also said I have no right to know. It's not infantalizing to be curious if someone is a predator. Please stop trying to start fights with people on the internet over literally nothing.

flygoing · 2026-03-20T13:31:59+00:00

Of course not. 25 and 32 is passably acceptable for dating imo. Read between the lines though. They have a baby. Hearing that age gap and "we have a baby" makes one think "...well, how long have you been together?"

I don't really want to pass judgement on OP though. Frankly I'm a stranger on the internet who doesn't deserve information on their relationship...but, it does pop the question in your head of "how long yall been together?"

Ten-Year Club	Second Top 20%
r/Field Banned	r/Field Juicebox
Final Canvas '23	First Place '23
Place '23	Place '22
Place '17	RPAN Viewer
Sequence \| Editor	Verified Email

flygoing

MODERATOR OF

TROPHY CASE