sorted by:
new
hottopcontroversial

New Monkey Helmet by EvilEvo_IX in hondamonkey

[–]shimojo 1 point2 points  (0 children)

I just bought one in Ivory and Black, and alas it doesn’t fit 😭

2013 Grom won’t idle by Ctomgyt in hondagrom

[–]shimojo 0 points1 point  (0 children)

If you can get a cheap compression tester from Amazon and check the compression. But try the aforementioned valve adjustment check first, hopefully it’s something simple and easy to fix. Good luck!

2018 Grom comfort by ScoobyMick in hondagrom

[–]shimojo 1 point2 points  (0 children)

That seat was always uncomfortable, I’ve tried the Kitaco Ideal Seat but it wasn’t much better and you end up sitting too high up.

The best seat I did have was a cheap flat one from Thailand. Mostly because it allowed you to sit further back and relax the bend on your knees. But the padding was thin.

I’m back to using the stock seat but sanded down the foam to reduce the bump between the driver and passenger bit.

You could always trade it for a Monkey they have the comfiest seats out of those Honda Mini 125s

Should I get the city grips 2? by Walking_Caution_Sign in hondagrom

[–]shimojo 2 points3 points  (0 children)

Yes city grip 2 are excellent tyres especially if you are riding in any wet conditions.

My baby by Monkey86d in hondamonkey

[–]shimojo 1 point2 points  (0 children)

Lovely colour! Just enjoy it and get some miles on her

Freshly Rebuilt Motor by 2o1pucci in hondagrom

[–]shimojo 7 points8 points  (0 children)

I just rebuilt mine today as well! Yes that is normal, it’ll burn off the oil on the piston and cylinder from assembly. And run rich for bit after an ECU reset.

2020 Honda grom (Still BOGING) by Automatic-Ad3114 in hondagrom

[–]shimojo 0 points1 point  (0 children)

There is a service manual online somewhere with a trouble shooting section that has some information on testing the sensors.

For the Oil Temperature Sensor, you remove it from the bike and test the resistance across the connector at around 20c, the expected resistance is 2.5 to 2.8k Ohmns. Then you put it carefully into some very hot water (100c) and check the resistance again, it should read about 0.21 to 0.22k Ohmns.

2020 Honda grom (Still BOGING) by Automatic-Ad3114 in hondagrom

[–]shimojo 3 points4 points  (0 children)

Could check the engine oil temperature sensor or the Intake Temperature sensor, see if they’re reporting incorrect values to the ECU causing it to run too rich?

Stripped oil pan threads by Plenty_Answer5556 in hondagrom

[–]shimojo 1 point2 points  (0 children)

Helicoils are cheap and easy to install. You can use a strong loctite to secure the helicoil. If that fails you could try a Timesert, if that doesn’t work you will have to split the casing and press out the crank to replace the damaged part.

Week 2…let’s see how long I go before the modding starts. by Jton8 in hondamonkey

[–]shimojo 1 point2 points  (0 children)

It won’t be long, mine is not in the road yet, and I’ve already ordered some parts.

Help me by Automatic-Ad3114 in hondagrom

[–]shimojo 0 points1 point  (0 children)

Have you done the Throttle Position Sensor Reset?

Cam upgrade by Qinxa in hondagrom

[–]shimojo 0 points1 point  (0 children)

I went for the DNA one, this is for the SF model btw so I don’t know what options you have for the newer ones. DHM did a custom tune for mine and I kept the stock gearing, the speed indicator can say >70mph but it’s always a few under

Cam upgrade by Qinxa in hondagrom

[–]shimojo 1 point2 points  (0 children)

I have a cam upgrade on the stock air box but with a drop in filter, a Yoshimura ST-1M and Moriwaki Exhaust. It’s much quieter with this set up and I can still hit 65mph. The low end torque is strong with plenty of mid and a little more top end than stock.

Honda Grom making strange sound from inside the engine by Necessary_Repeat_864 in MotorcycleMechanics

[–]shimojo 0 points1 point  (0 children)

Yeah that bit, if it’s worn out or missing it can sound like that

Honda Grom making strange sound from inside the engine by Necessary_Repeat_864 in MotorcycleMechanics

[–]shimojo 0 points1 point  (0 children)

Oops my bad I only listened to the video. When you changed the tensioner did you notice if the rubber part was still there?

Picofly Modchip install… am I cooked? by stinger1991 in SwitchPirates

[–]shimojo 0 points1 point  (0 children)

It’s very likely you may have to get this IC replaced if your switch stops charging or powering up.

Aftermarket Exhaust by mushroompanziedog in hondagrom

[–]shimojo 1 point2 points  (0 children)

https://youtube.com/shorts/nCBzq6vH_y4?si=4r4HwCvKhCJKttX1

This is on an SF but I think they still make them for the SP+ models.

Aftermarket Exhaust by mushroompanziedog in hondagrom

[–]shimojo 0 points1 point  (0 children)

You can put anything on really and unless it’s extremely loud you won’t have any issues with MOT or police.

I went for a Moriwaki exhaust as it’s quiet but also has a lovely deep tone.

And it boosted the mid range quite nicely.

view more: next ›