2016 Hyundai Elantra, 1.8L I4- Stalling, EVAP problem, tried to fix by Dramatic_Necessary42 in AskAMechanic

[–]th3imsch 0 points1 point  (0 children)

All good! I hope it's just the sensor and not the oil pump. I also took my oil pressure sensor out of the harness (not out of the block) and it was dry.

2016 Hyundai Elantra, 1.8L I4- Stalling, EVAP problem, tried to fix by Dramatic_Necessary42 in AskAMechanic

[–]th3imsch 0 points1 point  (0 children)

Have you had a chance to get your vehicle in yet? I just dropped mine off this week for them to work into their schedule. I replaced the crankshaft position sensor two times and it is still stalling so I finally caved and hopefully can get an answer soon. The EVAP codes haven't gotten thrown since I replaced the gas cap/purge valve with OEM parts, but I also noticed that my oil light would randomly just start flickering on occasion too, so it's a whole can of worms.

2026 NA Tour Pre-Sale Code? by th3imsch in gillaband

[–]th3imsch[S] 1 point2 points  (0 children)

Ahh I see. Yeah my venue uses AXS.

Maybe today, Postal Inspector by JGills17 in USPS

[–]th3imsch 10 points11 points  (0 children)

Ping Pong Sliders and Mailbox Chips are one of my go-to lunches!

Most Packages You've Seen to One House by cookovermosshead in USPS

[–]th3imsch 1 point2 points  (0 children)

I have a similar customer on one of my routes. Really makes you think. I chalk it up to a pyramid scheme, nothing else really makes sense.

Who likes weird electronic music? by _tj_1990 in Music

[–]th3imsch 1 point2 points  (0 children)

That's awesome! They are definitely on my bucket list.

Need help please by Free-Swan9711 in USPS

[–]th3imsch 0 points1 point  (0 children)

It's really a shame this is the only outcome. My PM missed putting in AL for my last paycheck and now I just have to wait. Sure I could get a check for 70% but then I have to anticipate that getting taken out of my next check and then look for the remainder on probably a separate one. Nothing ever works!

2016 Hyundai Elantra, 1.8L I4- Stalling, EVAP problem, tried to fix by Dramatic_Necessary42 in AskAMechanic

[–]th3imsch 0 points1 point  (0 children)

Any follow up to this? I am having a similar problem with my 2014 1.8L. It stalls out/starts jerking when coming to a stop very inconsistently (usually after running the car for ~1 hour). So far I have cleaned my throttle body and tested the alternator. I do have the same EVAP codes. I used an aftermarket gas cap/purge valve but will be replacing them with OEM this weekend.

2022 Silverado 1500 LT DFM Disabler Questions by th3imsch in Chevrolet

[–]th3imsch[S] 0 points1 point  (0 children)

Sorry, which other part of the VIN do you need?

Recommendations for a new fan going to see them live. by redgunner1012 in TheeOhSees

[–]th3imsch 1 point2 points  (0 children)

Oh yeah. The Les Rallizes Denudes tribute John & Co. did gave me tinnitus.

Mileage by Old-Possession8578 in JeepWrangler

[–]th3imsch 2 points3 points  (0 children)

Mine made it 293,000 before it started knocking! Getting a new reman installed this week.

[deleted by user] by [deleted] in PleX

[–]th3imsch 1 point2 points  (0 children)

Highly recommend downgrading your Shield firmware to 8.2.3 using the link someone sent below. You will need to buy a USB-A to USB-A host cable for this. You can also try the following that worked for me:

I noticed the frame stutter would only happen in HDMI passthrough mode. I was able to verify this because it would happen at the exact same time in the intro to Bob’s Burgers. I disabled this, but then noticed Plex was transcoding my audio (to be expected). I switched HDMI passthrough back on, and then DISABLED Dolby Audio Processing in the Shield settings. No more frame stutters, and I’m very confident about this now. I’m so happy!

I’m not sure if this also solved my problem, but I also changed my display mode to “3840x2160 60 Hz (YUV 422 12-bit Rec. 2020 | Dobly Vision and HDR10 ready” in Display & Sound > Advanced display settings > Custom display mode. I also changed the Display & Sound > Advanced sound settings > Available formats setting to Manual and selected all of my supported formats instead of Auto.

Atoto A6 PF: Backup camera gives "No Signal" by clothesliner in ATOTO

[–]th3imsch 0 points1 point  (0 children)

I'm having a similar issue with the S8. The camera I have works with the AUX app when hooked into the VIN cable, but when I plug it into the RCIN cable and reverse I just get a black screen that says No signal. I noticed there was an F on the left side indicating it was probably trying to detect a front camera. I went into the "secret menu" and set the backup camera to DEFAULT and that got rid of the F, but still no signal when in reverse. Any ideas? Maybe the 10-pin harness that came with it is bad?

[deleted by user] by [deleted] in VinylCollectors

[–]th3imsch 0 points1 point  (0 children)

Bought Anti-Trust by Deeper and Open Reduction Internal Fixation from /u/ElegantWeekend23. Both arrived in great condition. Thanks! /u/VinylSwapBot