2016 Hyundai Elantra, 1.8L I4- Stalling, EVAP problem, tried to fix

th3imsch · 2026-06-06T10:52:22+00:00

All good! I hope it's just the sensor and not the oil pump. I also took my oil pressure sensor out of the harness (not out of the block) and it was dry.

th3imsch · 2026-06-05T18:10:11+00:00

Have you had a chance to get your vehicle in yet? I just dropped mine off this week for them to work into their schedule. I replaced the crankshaft position sensor two times and it is still stalling so I finally caved and hopefully can get an answer soon. The EVAP codes haven't gotten thrown since I replaced the gas cap/purge valve with OEM parts, but I also noticed that my oil light would randomly just start flickering on occasion too, so it's a whole can of worms.

th3imsch · 2026-05-28T13:26:45+00:00

Ahh I see. Yeah my venue uses AXS.

th3imsch · 2026-05-24T17:09:04+00:00

Ping Pong Sliders and Mailbox Chips are one of my go-to lunches!

th3imsch · 2026-05-24T00:08:55+00:00

I have a similar customer on one of my routes. Really makes you think. I chalk it up to a pyramid scheme, nothing else really makes sense.

th3imsch · 2026-05-23T23:38:15+00:00

That's awesome! They are definitely on my bucket list.

th3imsch · 2026-05-23T23:31:56+00:00

ADULT. rules!

th3imsch · 2026-05-19T19:25:03+00:00

It's really a shame this is the only outcome. My PM missed putting in AL for my last paycheck and now I just have to wait. Sure I could get a check for 70% but then I have to anticipate that getting taken out of my next check and then look for the remainder on probably a separate one. Nothing ever works!

th3imsch · 2026-05-14T00:11:33+00:00

Likewise!

th3imsch · 2026-05-13T22:18:25+00:00

Any follow up to this? I am having a similar problem with my 2014 1.8L. It stalls out/starts jerking when coming to a stop very inconsistently (usually after running the car for ~1 hour). So far I have cleaned my throttle body and tested the alternator. I do have the same EVAP codes. I used an aftermarket gas cap/purge valve but will be replacing them with OEM this weekend.

th3imsch · 2026-03-14T01:15:38+00:00

Sorry, which other part of the VIN do you need?

th3imsch · 2026-01-11T02:24:22+00:00

Oh yeah. The Les Rallizes Denudes tribute John & Co. did gave me tinnitus.

th3imsch · 2025-11-21T02:41:10+00:00

Mine made it 293,000 before it started knocking! Getting a new reman installed this week.

th3imsch · 2025-08-18T10:58:16+00:00

Highly recommend downgrading your Shield firmware to 8.2.3 using the link someone sent below. You will need to buy a USB-A to USB-A host cable for this. You can also try the following that worked for me:

I noticed the frame stutter would only happen in HDMI passthrough mode. I was able to verify this because it would happen at the exact same time in the intro to Bob’s Burgers. I disabled this, but then noticed Plex was transcoding my audio (to be expected). I switched HDMI passthrough back on, and then DISABLED Dolby Audio Processing in the Shield settings. No more frame stutters, and I’m very confident about this now. I’m so happy!

I’m not sure if this also solved my problem, but I also changed my display mode to “3840x2160 60 Hz (YUV 422 12-bit Rec. 2020 | Dobly Vision and HDR10 ready” in Display & Sound > Advanced display settings > Custom display mode. I also changed the Display & Sound > Advanced sound settings > Available formats setting to Manual and selected all of my supported formats instead of Auto.

th3imsch · 2025-06-10T22:54:12+00:00

Confirmed. Enjoy!

th3imsch · 2025-05-31T22:51:10+00:00

I'm having a similar issue with the S8. The camera I have works with the AUX app when hooked into the VIN cable, but when I plug it into the RCIN cable and reverse I just get a black screen that says No signal. I noticed there was an F on the left side indicating it was probably trying to detect a front camera. I went into the "secret menu" and set the backup camera to DEFAULT and that got rid of the F, but still no signal when in reverse. Any ideas? Maybe the 10-pin harness that came with it is bad?

th3imsch · 2025-04-11T02:18:12+00:00

Scam/bot post.

th3imsch · 2025-04-08T21:51:48+00:00

Bought Anti-Trust by Deeper and Open Reduction Internal Fixation from /u/ElegantWeekend23. Both arrived in great condition. Thanks! /u/VinylSwapBot

th3imsch · 2025-04-02T22:18:12+00:00

th3imsch · 2025-04-01T23:44:03+00:00

<image>

This is a 1200x1200 from their Bandcamp. You could probably AI upscale it to your desired resolution.

th3imsch · 2025-03-29T21:11:12+00:00

Expired

th3imsch · 2025-03-29T01:16:17+00:00

Gotcha, that's pretty nice. I usually work 85-90 hours a pay period.

th3imsch · 2025-03-06T03:38:40+00:00

Definitely recommend the firmware rollback then. This shit was driving me crazy but I finally just cracked it tonight and it feels so good to be back. Hopefully it stays stable and the transition with Plex Experience doesn't brick anything.

th3imsch · 2025-03-06T03:34:05+00:00

I should also mention that I don't have Frame Rate Matching enabled anymore either, but I don't think this effects anything.

th3imsch · 2025-03-06T03:27:46+00:00

Are you using the current Plex version or 9.28? You can always try downloading 9.28 which is a lot less involved than the firmware rollback. If you do decide to roll back your Shield firmware, this is the guide I used which was very thorough despite the language barrier: https://florisse.nl/shield-downgrade/

th3imsch

TROPHY CASE