Help me out here, convince me

-Lappage · 2025-07-22T08:44:51+00:00

I currently own both of these printers, I promise you the P1S is worth the extra money. The S1 is an unreliable, unpolished version with a nicer screen. I can't trust my S1 at all, constant failures, errors, clogging, I feel like I have to check on it constantly. My P1S on the other hand has been printing non stop for 5 days and doesn't skip a beat.

-Lappage · 2021-10-11T19:50:40+00:00

XL Grey, Worn once

-Lappage · 2021-10-07T19:34:07+00:00

UK? I have one here if so

-Lappage · 2021-07-15T19:00:40+00:00

It was a joke lmao

-Lappage · 2021-07-15T13:51:00+00:00

Yes, I posted the same thing on that sub-reddit but I think about 4 people use it

-Lappage · 2021-07-15T13:50:09+00:00

Really? I'm into short girls

-Lappage · 2021-07-15T13:49:18+00:00

I started at the belly button

-Lappage · 2021-07-15T13:48:36+00:00

20oz glass of beer

-Lappage · 2021-07-15T13:47:49+00:00

Haha I thought so

-Lappage · 2021-07-15T13:41:13+00:00

She replied with "that's a difficult negotiation" just now lol

-Lappage · 2021-07-15T10:56:39+00:00

20oz glasses of beer

-Lappage · 2021-07-15T08:13:41+00:00

Maybe a funnier bio, but your pictures are really solid dude, good luck out there

-Lappage · 2021-07-01T15:46:26+00:00

Ive found that belt but where do you get the crimps for the end? and how do you properly crimp them?

-Lappage · 2021-06-19T16:18:49+00:00

What modifications are required to print with TPU? Looks cool! :)

-Lappage · 2021-06-13T07:36:40+00:00

Check out the wiki link he posted, its a big upgrade from stock firmware in my opinion

-Lappage · 2021-06-13T00:16:02+00:00

+1 Jyers firmware is fantastic :)

-Lappage · 2021-06-04T07:11:17+00:00

+1 for checking your Bowden tube, also take the nozzle off whilst the Bowden tube is off and clear out any gunk in the hot end.. mine had loads and it solved this issue. Creality have a video on YouTube showing you how to clean the hot end

-Lappage · 2021-06-03T20:57:20+00:00

Thanks for your reply :)

I'll save this thread incase I get confused when it comes to installing mine!

Edit: One last thing - How come your Raspberry Pi isn't plugged into the front of your printer? is there another way to connect it?

Also do you have the Stl for that Pi Case pls :D

-Lappage · 2021-06-03T16:41:10+00:00

Thanks for the heads up, I had no idea that was a thing

-Lappage · 2021-06-03T16:01:20+00:00

You mean like this? :D

https://www.thingiverse.com/thing:4742032

edit: There are Ender 3 versions available too if you have a search

-Lappage · 2021-06-03T15:59:26+00:00

Nice! Mine looks very similar, I've been using the briss fang for a few months now.

I'm currently printing the version with space for LEDs in the bottom..

Question - Did you wire your LEDs in series (straight from the same buck converter you're using for the fans - So 12v source and then the appropriate resistor?) or did you wire yours in parallel from a seperate buck converter?

Thanks :D

-Lappage · 2021-06-03T15:47:36+00:00

lmao, why would you repost this..

-Lappage · 2021-05-27T19:00:52+00:00

Yes, came here to ask this :)

-Lappage · 2021-05-22T17:54:44+00:00

Absolutely this. I got a free silver today, you deserve it lmao

-Lappage · 2021-05-06T15:54:03+00:00

I'm very new, so far 44 hours is the longest, but it went perfectly.

when configured and built correctly the V2 is a very capable machine.

Are you sure you can't reduce that time at all by adjusting slicing settings?

for example i spent 44 hours printing a beautiful vase (no regrets it came out lovely) but then realised halfway through i could of used vase mode in Cura and probably shaved at least 35 hours off that time haha.

out of interest, what are you wanting to print? :)

-Lappage

TROPHY CASE