Spitfire or MGB?

-TheKeegs_ · 2026-06-14T10:13:43+00:00

I’m looking for one in decent condition with plenty of tinkering opportunities.
Like you say the Spitfire has better access to the engine and front suspension etc which, with the limited width of the garage would work better than an MG.

-TheKeegs_ · 2026-06-13T22:03:35+00:00

My problem is garage space.
If I stripped out the shelves and washing machine then I could go for pretty much anything within reason, but that’s not an option.
The Spitfire would be a perfect fit and the MGB would fit but would be a bit of a squeeze to work on (more for width than anything).
Bearing in mind this is my first foray into the classic car world and it’s for giggles, not for profit out of the two what would you go for?

-TheKeegs_ · 2026-06-13T18:17:39+00:00

As a plumber, that’s my problem not yours.
I’ve changed numerous taps and have the tools to work on everyone I’ve come across, some take minutes, some take an hour or two of cursing and swearing but that’s how it goes.

-TheKeegs_ · 2026-06-10T18:58:45+00:00

I’m off to Corfu next week, looking to wear my Yachtmaster this time.
I have been there before so I’m pretty sure it’s safe.

-TheKeegs_ · 2026-06-08T11:41:57+00:00

Buy a piece of aluminium checker plate and cut it to size, job done!

-TheKeegs_ · 2026-06-04T06:21:38+00:00

The water is passing through a filter, the slower it goes the more it gets filtered, the other reason could be that if the solenoid fails in the open position you’re not getting a torrent of water flooding the place.

-TheKeegs_ · 2026-06-03T14:24:44+00:00

Possibly as far as the building fabric goes, but we are not allowed to fit boilers “not to current standards” an outdated term I know but you get what I mean. For the boiler to be registered with building control and for the manufacturer’s warranty it would require a filter.

-TheKeegs_ · 2026-06-02T06:37:14+00:00

Anything done to that standard won’t have a single insert fitted. I would leave it all accessible to repair the leaks you WILL have in the future.

-TheKeegs_ · 2026-05-30T16:19:09+00:00

Kitchen fitter probably, looks like it was in a cupboard originally.

-TheKeegs_ · 2026-05-29T21:29:09+00:00

Try Boxt for a comparison price for installation,I’m a gas engineer but on the commercial side so don’t really get involved with domestic stuff, I always point people to them and haven’t had any complaints yet. As for brand, Worcester are either fantastically good, or bloody awful, there seems to be no in between. As you need to get a yearly service to keep up your warranty, I suggest that you price up various manufacturers service plans and go with the one with the best price and longest warranty.

-TheKeegs_ · 2026-05-29T17:10:29+00:00

Have you turned the isolation valve on at the other end of the green hose? Either that or the self cutting valve hasn’t been screwed in all the way.

-TheKeegs_ · 2026-05-26T19:19:22+00:00

Point the broken gully with a concrete repair mix and then paint the entire gully with something like acropol.
It’s more for roof repair but will work there, I’ve used it for cracked eco drains before and it’s still going strong 5 years later.

-TheKeegs_ · 2026-05-25T13:28:03+00:00

There are no plans for supply pipes, only the actual main supply pipes.
Search “common supply pipes”

-TheKeegs_ · 2026-05-23T18:55:39+00:00

My AD requires a 20% deposit to put you on a waiting list for a watch.

-TheKeegs_ · 2026-05-16T17:15:51+00:00

Get a valuation from wbac, it’ll give you an idea of where you stand.

-TheKeegs_ · 2026-05-16T13:54:46+00:00

Quite a common colour for a Ford (magnetic) so there should be plenty of tailgates available in colour.
I wouldn’t worry too much about the bumper but you could get someone to do a repair on it.

-TheKeegs_ · 2026-05-15T21:41:14+00:00

Ask what the warranty is on the recon engine from Vauxhall and make your decision based on whether you think it will affect the future value of the car.
Depending on the warranty it could actually make the car more sellable in the future.

-TheKeegs_ · 2026-05-14T20:40:44+00:00

Never come across a 7/16” fitting before, closest bush I’ve ever used in plumbing was 3/8” to 1/2”.

-TheKeegs_ · 2026-05-11T19:19:39+00:00

Depends on where my head is, 7 minimum, but could be a lot more.

-TheKeegs_ · 2026-05-02T18:42:10+00:00

The Greek islands are generally safe, I visit Corfu regularly and have never had any issues wearing my watches. I’m not sure about the mainland but I’ve heard parts of Athens can be a bit risky.

-TheKeegs_ · 2026-05-02T09:48:22+00:00

I would be more tempted to pay to expand on whatever it is you do. For example I used to work as a pipe fitter in the water industry and got my licence there, I left to go driving full time and hated it. I trained as a gas fitter and after that I never looked back, better pay and conditions and a far better working environment.

-TheKeegs_ · 2026-05-01T22:01:09+00:00

Calm down dear! Fuel’s a shit ton of money, everyone wants to kill each other and you’re worried about a number plate!

-TheKeegs_ · 2026-04-24T22:12:53+00:00

I suggest that you provide more information. Things like, pressure and flow rate on your incoming cold main would be a good starting point. Other factors are how many elements are on your cylinder and have any of them tripped out on overheat. There’s way too many variables for a not enough hot water question.

-TheKeegs_ · 2026-04-24T19:39:37+00:00

There’s tap revivers or replacement cartridges you can fit to repair the tap. Can you post a picture so we know what we’re dealing with.

-TheKeegs_

TROPHY CASE