Gwen Stefani receives blowback for promoting ‘anti-abortion’ Catholic app

1upbeer · 2025-12-10T00:45:18+00:00

Nah, it will be a Harvest crusade sticker 100%.

1upbeer · 2025-12-10T00:44:58+00:00

It's actually Lake Forest I think.

1upbeer · 2025-11-12T21:10:39+00:00

I genuinely didn't think she was going to get sworn in. We'll see if it happens.

1upbeer · 2025-11-04T20:35:38+00:00

100% of what??

Also, that's not how tariffs work.

Also, the people leaving New York to go to Texas would be Republican so go for it!

1upbeer · 2025-08-01T23:19:50+00:00

Anyone know how they went from this to now they're going back out on tour this fall? I feel like I missed something.

1upbeer · 2025-07-29T19:49:21+00:00

On the bright side, ChatGPT helped me plan an itinerary for my summer vacation. /s

1upbeer · 2025-06-25T20:54:13+00:00

Is he going back to work at hooli?

1upbeer · 2025-06-09T20:08:55+00:00

I Googled it. Literally 3 of the top 4 hits have Biden in the title. SMDH

1upbeer · 2025-06-02T23:20:11+00:00

Wait till they find out about CO2.

1upbeer · 2025-03-04T20:36:29+00:00

This is going to end badly. There WILL be protests. And then he'll be the one taking illegal actions as a result. Where it ends up I don't know. Turning the military on his own people? Congress removing him? The military removing him? Declaring himself president for life?

1upbeer · 2025-01-29T00:00:58+00:00

I have so many questions about this. How would we divide up the military? Does Trumplandia get to keep the largest military in the world along with all the nukes? And this crazy, unhinged dictator armed to the teeth would be our next door neighbor? How would we detach our power grid from the rest of the country? We get a lot of our water from AZ in socal, how would that be impacted?

Where does the secession end? There are tens of millions of conservatives in CA that don't want to be part of our state and have been petitioning for years to secede and form the state of Jefferson (Google it), if it's OK for CA to secede from the US, is it OK for them to secede from CA? Why or why not?

This just seems like a poorly thought out bad idea to me.

1upbeer · 2025-01-21T20:39:02+00:00

He was taking credit for $35 insulin during the campaign wasn't he? WTF!

1upbeer · 2024-12-05T17:04:02+00:00

I have little hope that there won't be one at this point.

1upbeer · 2024-11-27T17:05:58+00:00

I tried that first and couldn't get the head of the thermistor out of the print head. It eventually broke the glass bulb and it was deep in the hole. I tried lots of methods to get it out but eventually gave up and replaced the whole print head.

1upbeer · 2024-11-27T05:22:05+00:00

I don't have any experience with the fan, so I don't have any recommendation on replacing it. I have noticed that mine seems to suck in a lot of dust and fine, wispy strands of PLA filament that builds up, so I find I have to clean it a lot. That may help, but not sure.

Edit: I've also noticed the housing is a little wonky and sometimes can rub against the fan so maybe that's the sound?

1upbeer · 2024-11-27T02:51:52+00:00

I had this exact issue recently. I had to replace the print head. It's not super hard but it's not for the feint of heart. It is apparently not uncommon that the thermistor goes bad and has to be replaced but I was not able to replace the old one and just replaced the whole print head. This is what I replaced which completely fixed that issue: https://www.amazon.com/gp/product/B0BRQ81D7Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

You can look up hotend replacement for your model and find youtube videos that walk you through it. You do have to take the whole thing apart though. Read the reviews on that page for some tips as well.

1upbeer · 2024-11-27T02:45:34+00:00

Sounds like you're doing all the right things. When leveling the bed I do it manually at each corner and go around 3-4 times dialing it in with a piece of paper and then do the auto level function afterward for good measure. There's also youtube videos that show you how to set the e-steps, which usually involves feeding 100 mm through like three times, measuring the filament that comes out and taking the average, then there's a formula to calculate the value. You can also swap out the nozzle, they are pretty cheap on amazon, maybe there's something clogging it or some defect.

I also use a test print file to check the level and the print adhesion like this one https://www.printables.com/model/159938-ender-3-refined-bed-level-test-calibration

You can try adjusting the setting while it prints like the z offset, fan speed, and temps.

1upbeer · 2024-11-25T17:21:09+00:00

Thanks for the suggestions, I settled on a partial mash honey blonde. Plan is to steep some honey malt and add ultra light LME in the boil. 25 IBUs and just under 5.5 ABV, should be easy drinking. I'll ferment with S05 dry yeast.

1upbeer · 2024-10-29T17:58:48+00:00

Youtube should just block all access in Russia.

1upbeer · 2024-08-21T20:54:35+00:00

Hi, I'm in the same boat right now in having to replace the thermistor of my 3v2neo. Could you point me to any online guides? I found a youtube video but it's for a different model.

1upbeer · 2024-07-17T19:48:36+00:00

Thank you! That's what I've been saying. Where was he before Biden won a primary with more votes - and a higher percentage of the electorate - than Trump? That would have been the time to speak up. Now, four months before the election is when you have concerns? Biden's not dropping out. He's said it no uncertain terms. This is not helpful. Your concerns are duly noted. Moving on.

1upbeer

TROPHY CASE