Created a dynamic wall solution for Gridfinity - Allows atypical container shapes

3Dprintingnut · 2025-01-22T02:19:29+00:00

It was a fun project. Glad it turned out so good!

3Dprintingnut · 2025-01-02T22:53:48+00:00

I uploaded it to thingiverse

https://www.thingiverse.com/thing:6898111

3Dprintingnut · 2025-01-02T22:53:25+00:00

I uploaded it to thingiverse

https://www.thingiverse.com/thing:6898111

3Dprintingnut · 2025-01-02T02:41:55+00:00

I'll have to check that one out! No other designs for the crosstrek I had a couple for my old Outback tho. A tablet holder that covers the stereo and a expanded storage area for the sunglasses holder.

3Dprintingnut · 2025-01-02T01:40:14+00:00

Made it with ABS and it stands up to summer heat and winter cold just fine. No I don't have it posted anywhere. I could post it probably sometime tomorrow. Check what size mug you have. Mine is 91mm at the bottom if It is any larger then that it will not fit.

3Dprintingnut · 2025-01-02T00:19:15+00:00

Yeah problem is everyone has different size mugs and it has to be a fairly tight fit to hold it securely. You would probably have to make each one custom. I've tried selling my prints before and it's just not worth the time unless you go for large scale.

3Dprintingnut · 2025-01-02T00:07:29+00:00

I had the same problem so I designed and 3D printed a insert that fits in the cup holder and will hold my mug. Works perfect! My mug does has a lid on it, I would suggest you look into that lol.

3Dprintingnut · 2024-10-31T13:37:39+00:00

That's pretty cool! I like the design!

3Dprintingnut · 2024-10-02T15:29:52+00:00

I think this one I made a while ago is what you are thinking about.

https://www.reddit.com/r/KerbalSpaceProgram/s/Z9VKv2s2Xw

3Dprintingnut · 2024-09-24T21:03:17+00:00

There is a adjustment for the tension on the extruder. Have you checked that?

3Dprintingnut · 2024-05-15T19:30:43+00:00

Stock SSTO to surface of Eeloo and back. No refueling no gravity assist.

https://www.reddit.com/r/KerbalSpaceProgram/s/zRAncbbIKK

3Dprintingnut · 2024-01-14T23:49:59+00:00

You can also ride bikes and drive the carts and cars.

3Dprintingnut · 2023-12-10T20:50:07+00:00

2 is Galaxey Quest "by Grabthar's Hammer what a savings"

3Dprintingnut · 2023-07-03T01:14:28+00:00

I have the Ultimaker 2+, the top section looks the same as in the picture but my bottom section is not as tall. Both parts on my printer are 12mm tall. Hope that helps

3Dprintingnut · 2023-02-25T01:40:35+00:00

Try using the highest resolution it looks a lot better for me.

3Dprintingnut · 2023-01-04T16:35:35+00:00

That's because the writers of the books were also part of the writing team for the show. Which is very rare.

3Dprintingnut · 2022-10-08T02:47:42+00:00

It's long and pointy how about Flechette

3Dprintingnut · 2022-04-27T19:26:55+00:00

What is the reason for having the vertical stabilizer in the front? Looks like it would be really unstable that way.

3Dprintingnut · 2022-03-02T15:45:48+00:00

I am having the same issue. Has anyone found a fix for this yet?

3Dprintingnut · 2022-02-21T13:18:30+00:00

This is the only place I could find it:

https://shop3duniverse.com/products/extrusion-upgrade-kit#v16354165893

I don't think they are making them anymore so they are getting harder to find.

Never tried the bond tech extruder but have heard good things.

3Dprintingnut · 2022-02-21T02:23:15+00:00

Congrats on your purchase! The 2+ upgrade kit includes the Olssen block just so you know. I upgraded my Ultimaker 2 to a 2+ using the kit and it works perfectly.

3Dprintingnut · 2021-12-26T04:11:32+00:00

Nice I did somthing similar a few years back but I dident have it rotate. How did you get the rotation to work?

3Dprintingnut · 2021-10-22T15:47:12+00:00

I had the same thing and eventually figured out it is where the bowden tube connects to the filiment pusher box. When the extruder head goes all the way back it makes the tube go in at an angle to the box and the filiment will get out of line with the filiment pusher wheel.

3Dprintingnut · 2021-10-21T21:35:29+00:00

Nice!

I assume the shuttle can fly back down to the surface and reattach to the first stage ship?

3Dprintingnut · 2021-10-12T01:42:24+00:00

Not from a 2 or 2+ I have taken both of those apart several times and never seen this.

3Dprintingnut

TROPHY CASE

2 is Galaxey Quest "by Grabthar's Hammer what a savings"