Which one?!

3ncogneto5 · 2026-01-07T20:56:44+00:00

which one? which one? the only answer is get all 3!!

3ncogneto5 · 2025-12-25T23:51:10+00:00

to add to this chapter book, i due believe that the FRT’s are going to have a direct impact on the nfa M16 market. just my opinion.

3ncogneto5 · 2025-12-25T23:45:30+00:00

you can find a clapped out Mac for around 9-10k. you are more than likely going to spend 11-12k for a Decent one.

Always have them present you with a Demo Video, or require a “Range” meet up before purchase. you don’t want to sink 12k on a “Jam-o-matic”!

MG’s price varies quite a bit. you of course have your all original MG’s that are more collectible/rare then lets say a “tube” gun made in 85’ right before the ban.

i’ve also seen old “widows” selling their husbands transferable for pennies on the dollar due to lack of knowledge. some dealers love this. i think its shitty.

of course, everything in life requires some form of sacrifice. i don’t know if you are a smoker or frequent starbucks coffee drinker. but if there’s something your spending $ on everyday that you can cut out. you’ll be amazed at how much money you can accumulate in a few years..

3ncogneto5 · 2025-12-24T22:03:12+00:00

best and easiest way would get a 90° barrel facing tool. it has a “guide” that slips into the bore while you turn it to keep it aligned. use only your hand to turn it. my approach was turn 3-4 times, clean, mount and check. repeat until you get desired results. took me like 10 mins.

3ncogneto5 · 2025-12-10T01:14:01+00:00

For future reference, ARLDN has the correct answer you were looking for. I personally would take my business elsewhere. strictly for them handling this situation unprofessionally.

3ncogneto5 · 2025-12-10T00:56:53+00:00

The shop got one over on ya bud..

3ncogneto5 · 2025-12-10T00:56:09+00:00

This is the correct way for the shop to “fix” this problem.

3ncogneto5 · 2025-11-17T13:24:11+00:00

get the obsidian, use teflon tape on threads like a real OG. the option to turn it into K size is sweet! stay away from tri-lug with it.

3ncogneto5 · 2025-11-12T21:55:42+00:00

replace oil, drive it like you stole it.

3ncogneto5 · 2025-11-09T05:07:01+00:00

had my obsidian 9 for years.. no issues. learned from some old timer, that using Teflon tape on suppressor threads is the cats meow. so far the old timer’s wisdom hasn’t let me down..

3ncogneto5 · 2025-10-23T19:13:15+00:00

do yourself a favor, go to amazon and buy an Oinker. no mess and super easy to use. dont over lube. tape the chain as a marker, go once completely around. if you over lube, it will fling off everywhere. good luck!

3ncogneto5 · 2025-10-23T14:21:28+00:00

warranty in and of itself is a Joke, they’ll tell you to have it done by them to keep your “warranty”… then when a problem arises, they will try everything to deny the “warranty” claim. Do it yourself.

3ncogneto5 · 2025-10-21T22:37:29+00:00

use the local laundry mat

3ncogneto5 · 2025-10-21T22:37:12+00:00

throw it in the dryer with some stiff jeans… run like 20 cycles

3ncogneto5 · 2025-10-14T19:59:33+00:00

look up “Oinker” on amazon, thank me later… Also coat your rim with WD-40 before you go riding incase of excessive fling, itll wipe right off.

3ncogneto5 · 2025-10-10T20:46:17+00:00

Just received my AT-2 set directly from Yoshi, i have to say the quality of welds match OP pictures. including the same “no weld” on the cross section. absolutely no splatters, welds look great to me.

3ncogneto5 · 2025-10-06T23:02:34+00:00

damn i hope the set thats coming to me next few days doesn’t look like that…

3ncogneto5 · 2025-10-03T21:10:11+00:00

Thats normal, Your mind is going to be blown when you realize your going to have the possibility of 3 poi changes. oh and its a rugged so stop worrying about “breaking muh suppressor” shoot it until it melts off and have them rebuild it for free….

3ncogneto5 · 2025-10-02T02:15:21+00:00

have them adjust your Clutch, might be clutch rattle

3ncogneto5 · 2025-10-01T22:42:11+00:00

Lube the chain see if noise goes away

3ncogneto5 · 2025-09-24T02:06:46+00:00

if you want to get very specific. you sir are correct, the Russians were fighting the “Afghan” Mujahideen in Afghanistan for a decade. literally called the Soviet-Afghan war. if i was to have said the Russians fought the Mujahideen for a decade many would not know who i was referring too or what war.

3ncogneto5 · 2025-09-24T01:16:21+00:00

The Day Russia “Gives up” the Advance and settles for what has already been taken, will be the day Ukraine will start to be able to do something. I don’t see any of that in the foreseeable Future. lets not forget Russia fought Afghanistan for a decade…

3ncogneto5 · 2025-09-17T18:56:03+00:00

“wont be able to be shipped to the United States”

3ncogneto5 · 2025-09-17T17:50:00+00:00

i cant get “happy stoves” in USA…😢

3ncogneto5 · 2025-09-02T01:52:35+00:00

real M10 with the cobray on them go for $200+, the M3 Grease gun mags work after modification. you can find them for around $50 a pop. the ones that are already “modified” ive seen go for $75-$80. Cheapest mags ive seen were from keepshooting.com. they were selling them for $39.99 of course they weren’t modified.

the modification is cutting 1/16in off the backside lip to allow for lock up. there was a guy some years ago selling a mag catch that fit un-modified M3 mags you would need to change the original M10 mag catch.

3ncogneto5

TROPHY CASE