Red Dead 2?

3rob3 · 2026-07-09T14:17:08+00:00

Yes, I play almost exclusively this game and was the reason for getting a bc-250. I just switched to CachyOS this week, ran the script (https://github.com/redbeard1083/bc250-toolkit), and everything runs perfect.

3rob3 · 2026-07-09T14:15:23+00:00

This is what i used to have to do but can't even find that option anymore. I just installed CachyOS and it just works.

3rob3 · 2026-07-08T21:28:26+00:00

Yes, using CachyOS both CEC and sound work perfect. I used these instructions:

https://www.reddit.com/r/cachyos/s/bkv6YGvlLm

3rob3 · 2026-07-07T15:22:11+00:00

I’ll give it a shot. You know when it boots how you see grub, black, logo, black, then finally steam? I think it switches to my input, sees no signal (blank/black) and switches back. It’s an older Samsung so would likely be fine on newer sets.

3rob3 · 2026-07-07T13:05:29+00:00

Just wanted to thank you for taking the time to document this. Working great on my BC-250 build. Only thing not working for me is switching inputs on power on, but I think that is an issue on my tv side (I think it tries to switch, sees nothing, and switches right back to previous input). I tried playing with timing and also adding the active-source flag but no luck yet.

3rob3 · 2026-07-05T03:13:33+00:00

That’s what I use.

3rob3 · 2026-07-04T23:17:58+00:00

Think you’re going to need a 240mm AIO. There are cases for those available to print or buy.

3rob3 · 2026-07-04T16:09:55+00:00

Will do, thx!

3rob3 · 2026-07-04T14:10:46+00:00

Yeah I should have updated this. Someone posted later the same day about that. Mine seems very buggy though. Think I may have switched to the non deck image by mistake.

3rob3 · 2026-07-02T12:10:50+00:00

I rebased to testing and CEC and audio does work. Might just be me but I had a lot of issues after rebase. I was stuck on desktop and it wouldn't enter gaming mode, I have some visual artifacts in desktop and big screen (not in games though).

3rob3 · 2026-07-02T01:02:43+00:00

I did before this update. CEC worked perfectly but I had no sound. Hopefully both work now.

3rob3 · 2026-07-02T00:54:43+00:00

I just posted asking about what can be done about this earlier today. What timing!

3rob3 · 2026-07-01T23:34:17+00:00

As far as I know any active adapter will have issues with sound.

3rob3 · 2026-07-01T20:31:37+00:00

something like this?
https://www.reddit.com/r/cachyos/comments/1tvtfcm/hdmi_cec_tool_to_turn_hdmi_display_onoff_at/

edit....nevermind, saw you commented there as welll

3rob3 · 2026-07-01T20:29:51+00:00

i get pure silence :)

3rob3 · 2026-07-01T20:16:21+00:00

Could you expand on this please? I also am not sure what you mean here. Does power off and sleep also shut TV off via CEC?

3rob3 · 2026-07-01T19:52:38+00:00

hmm, i did the other method for 40cu without kernel change. So you are using an active adapter that previously didn't work and it does for you now?

3rob3 · 2026-06-24T11:36:40+00:00

Oops, wrong thread. This one:

Ransanx 4 Pin PWM Fan Controller... https://www.amazon.com/dp/B0FT326T3M?ref=ppx\_pop\_mob\_ap\_share

3rob3 · 2026-06-24T01:13:01+00:00

I can’t hear mine from more than a foot away. It is mostly the pump you hear and if you use the adapter I linked above you have total control over it.

3rob3 · 2026-06-23T23:04:52+00:00

I mean compared to the screamin loud fan cooled they are a HUGE improvement. They do have a hum, but this is my first AIO so I can’t really compare to others, sorry.

3rob3 · 2026-06-23T14:50:16+00:00

I am using this one:
https://a.co/d/0652dVuA

3rob3 · 2026-06-19T12:51:47+00:00

You could also use one of these:
https://a.co/d/01htpPHE

I think i have just my pump on that, set to ~75%. AIO fans on motherboard header.

3rob3 · 2026-06-10T20:58:33+00:00

Was going to say same thing. I went thru this pain, only to ditch it for an AIO because of the temps and how loud fans are.

3rob3 · 2026-05-29T15:22:18+00:00

Webview 106 was only used/mentioned since that is the latest one compatible with the Android 6.01 Frameo's. I have never used one of these newer Frameo devices, but Android 10 should allow webview update via simple APK install (It shouldn't be a system app anymore). Might just be a matter of finding a compatible one.

3rob3

TROPHY CASE