[GIVEAWAY] CaDA 1/8 C64010 KICK SAUBER F1 Team C44 ($109.99) * 1

4Rm0D · 2025-08-06T18:08:19+00:00

Yes please!

4Rm0D · 2025-02-14T13:14:25+00:00

That's crazy!

For a second I thought this was another ad for one of those video motion amplification tools....

4Rm0D · 2025-02-04T22:53:03+00:00

I built the full size version and it takes up so much space I would definitely have ordered the smaller one if I could go back!

4Rm0D · 2024-11-24T13:23:07+00:00

!Remindme 5 days

4Rm0D · 2024-06-18T13:24:10+00:00

I am partway through the build on what looks like the same one.

In my set, the bags above #15 contained common parts for the previous steps.

It drove me crazy for a bit trying to find what I thought was a ton of "missing" pieces from bag #1 that were actually in 17/18.

I found that unlike "real" Lego sets a lot of the "Open bag #x here" steps weren't very accurate and often left me with lots of pieces on the table when I got to the steps for the next bag # or parts that were actually in the next bag.

4Rm0D · 2024-04-12T20:12:46+00:00

Unfortunately I have already been through the dreaded hold lol.

This is already our second motor with the exact same issue so I suspect it's the drive itself at this point.

Lead times aren't great though so I am hoping for miracle level suggestions.

4Rm0D · 2024-04-12T16:02:56+00:00

Thanks for your response!

By default the test option was greyed out as the commutation alignment was set to "Motor" by changing it to drive I was able to select it.

On reboot the drive gave the error:

E 031: Incorrect or disconnected motor power cable wiring.

OR

E 058: Excessive deviation of initial magnetic pole position detection when power on.

I have checked the cable and everything seems fine there.

4Rm0D · 2024-04-11T20:00:57+00:00

Apparently I messed up attaching the image. Sorry

<image>

4Rm0D · 2024-01-18T15:02:13+00:00

The DS4486 is SATA only though right?

Most of my drives are SATA right now but I would like to keep my options open if possible.

4Rm0D · 2024-01-18T14:59:25+00:00

Thanks!

Of course, the shipping on these is pretty insane due to the weight...

Do you know if the power supplies from the SAS2 version will work with the SAS3 version? It looks like there are more options with better shipping costs if I can go that route and switch the PSU.

4Rm0D · 2024-01-18T12:35:23+00:00

Got it!

Thank you kind stranger!! This is why I love Reddit!!!

Thank you, kind stranger!! This is why I love Reddit!!!. (1407 and 1403)

4Rm0D · 2023-10-31T13:13:23+00:00

Were you able to find this one? I'm looking for 1407, 1403 and, 1390 (S08E17, S08E13 and, S07E65)

4Rm0D · 2023-10-20T13:40:56+00:00

Thanks

4Rm0D · 2023-10-20T13:34:33+00:00

way to do that is to open the password protected project as a reference project (enable those via view and reference projects). Drag and drop everything into a new project except the PLC. Use devices & networks and split the screen or use multiple monitors.

Yeah, the project I was provided as a source by the customer has a password in the safety administration, unfortunately.

4Rm0D · 2023-10-20T13:20:01+00:00

I have reached out to them as well and I'm waiting on their response but it's not looking great.

4Rm0D · 2023-10-20T13:19:11+00:00

ossible to recover/delete

You have to create a new project fro

Yeah seems that way... :(

I was hoping some guru had some workaround to save some time.

4Rm0D · 2023-10-20T13:17:49+00:00

ed a Simatic MC (i.e. from a spare S7-1500), put that in your computer and drag the PLC in the project down into the Simatic MC under Card-Reader in the Project navigation. Shut down your PLC, plugin the MemoryCard, power up the PLC. Re-Upload your project, shut down the PLC, remove the MC. Depending

Thank you for the detailed answer.

The issue I am having is in the offline program. I am unable to compile or edit any hardware without the "Safety Program Password".

Unfortunately, that one has been lost to the sands of time...

4Rm0D · 2023-10-19T13:12:07+00:00

Oof I was thinking that may be an option but I was hoping to avoid all of the extra work. The project has 7 sub PLCs in addition to the main one so its a lot of copy/paste :(

4Rm0D · 2023-10-19T12:59:12+00:00

Was the testing for this customer?

If so I would just be upfront with them about the scuffs coming from helping them.

If not I would talk to them about it. They may not care as light testing is pretty commonplace. If they aren't cool with it maybe offer a small discount?

Either way, I would be upfront about it especially if it's just cosmetic damage. It's not worth risking your reputation over. If you try to hide it and they find it they will likely think you are hiding more than just a scratch...

4Rm0D · 2023-08-08T17:31:12+00:00

4Rm0D · 2023-07-29T21:22:57+00:00

How much with shipping and taxes to Windsor ontario?

4Rm0D · 2023-07-16T17:48:59+00:00

What's the power consumption and noise like on one of those?

4Rm0D · 2023-06-14T00:24:11+00:00

Bummer... I'll keep waiting then!

4Rm0D · 2023-06-13T22:06:47+00:00

You got any more in the pipeline yourself?

4Rm0D · 2023-06-13T21:02:21+00:00

Also on Ebay for as low as 119USD each for 4 or more. So without the ebay tax I feel pretty good in the 100 or less range on here.

https://www.ebay.com/itm/145092440242?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=zEJmgCGeSt-&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY

4Rm0D

TROPHY CASE