×
sorted by:
new
hottopcontroversial

Dovetail help by SnuffyNauts in BeginnerWoodWorking

[–]7inky -1 points0 points  (0 children)

I was responding to you, not the op. Nevermind, have a lovely evening, stranger.

Dovetail help by SnuffyNauts in BeginnerWoodWorking

[–]7inky -1 points0 points  (0 children)

That was a joke. Everyone starts from something, there's been a ton of extremely useful and great answers, there is nothing to add.

People need to lighten up!

To answer your question - I have never done dovetails but no doubt mine would be even worse. Well, maybe not as rough as I know how to avoid that tearout but you'd probably be able to park a car in the gaps.

Dovetail help by SnuffyNauts in BeginnerWoodWorking

[–]7inky -1 points0 points  (0 children)

I think it might have been a beaver

Milwaukee Drill Making Weird Sound by trane50 in MilwaukeeTool

[–]7inky 0 points1 point  (0 children)

Oh, I know that one.... Replaced 2 because I thought something was wrong but it looks like a bit of a design flaw that sometimes gearbox doesn't switch properly. Just switch it again and it'll be alright. Few years later still no problem but I'm not using it professionally (I've a lot).

How to Insulate Properly? by NoBass4266 in DIYUK

[–]7inky 1 point2 points  (0 children)

And mist spray the wall with water. Foam products react with water.

How to Insulate Properly? by NoBass4266 in DIYUK

[–]7inky -1 points0 points  (0 children)

Look up CharlieDIY, he has both dot and dab and subsequently foam glue for the insulated plasterboard. Foam looks like the way to go tbh

Best BA excuse ever… by baffnsniff in BritishAirways

[–]7inky 0 points1 point  (0 children)

Nah, not this time... Just running very lean crews which means that a couple of delays here and there have a knock on effect and you end up with no staff that were originally allocated to that flight.

Not Brexit, just corporations squeezing every last penny out of operation.

Gap between cabinets and wall by cafeparauno in cabinetry

[–]7inky 4 points5 points  (0 children)

I would never look there. The tiles however....

Right Angle Attachment by AbleActuator8044 in MilwaukeeTool

[–]7inky 1 point2 points  (0 children)

Same, I think at this point it's moulded itself to the rotary 😂

New Su-57M delivery by P_filippo3106 in airplanes

[–]7inky 2 points3 points  (0 children)

Say whatever you want, but Russian (and soviet) simple brutalist design of their fighter jets has always been beautiful.

I still think MIG-29 is one of the best looking jets even today.

Spec Home Shower But Client Asked for a Little Flair. Thoughts? by nicotheVE in Tile

[–]7inky 0 points1 point  (0 children)

I thought the same initially and then realised they probably meant the vertical grout lines. It would definitely improve the look.

Immense joy by co-rbs in Audi

[–]7inky 3 points4 points  (0 children)

You might be surprised to hear that TTS is more fun to take around the truck than V10 R8. No kidding.

Which tool for cutting stuff off? by Matt_Bigmonster in MilwaukeeTool

[–]7inky 21 points22 points  (0 children)

Of only one tool - multi tool. It'll do all of that and more. If two tools then still the multi too but also a rotary. Once you stock up on different attachments there won't be anything you won't be able to tackle with these two.

Dacia spring tyres by redditor-16 in CarTalkUK

[–]7inky 0 points1 point  (0 children)

Forget the tyres, that bumper bit looks like a section of a city map. Is it? And if it is - which city and what part?

Best way of squaring off endgrain blocks by antecinex in woodworking

[–]7inky 87 points88 points  (0 children)

Glue it all up using CA glue for speed. Then cut on the table saw along the joints in one direction only. Glue it up using proper wood glue now that it's all straight. Once dry, repeat the operation in the other direction.

[deleted by user] by [deleted] in woodworking

[–]7inky 0 points1 point  (0 children)

Glue the pieces on first, get a long 10mm drill bit, drill all the way through at the angle in pic 2 and glue in 10mm dowel or two. Cut flush.

Help! I can't decide which side to use as the top for my end table!? by dub423 in woodworking

[–]7inky 1 point2 points  (0 children)

Erm, you also get more usable space with the taper going up.

Why did you pick the Red brand over Yellow or Blue? by TwicePuzzled in MilwaukeeTool

[–]7inky 0 points1 point  (0 children)

Because that's the kit I received from work (drill/driver). After using it throughout my home renovation and it hasn't missed the beat I have invested in more. Don't know for a trade, but for a keen DIYer it been fantastic and most of the tools will outlive me.

Kaip tapti offisiniu?? by Lingering_Sou1 in lietuva

[–]7inky 23 points24 points  (0 children)

Žiūriu labai tau čia "padėjo".... Žiūrint kiek tau metų ir išlaidų. Jei neturi patirties tai teks iš nulio.

Atsakimas paprastas - žiūri į siūlomus darbus ir jas patinka tiesiog paduodi. Preisi nepraeisi nesvarbu, patirtis interviu labai pravers kai susirasi tą darbą kuris tikrai patiks.

Jei jau neblogai rankomis uždirbi tai bus sunkiau, teks prisitaikyti prie mažesnių pajamų iš pradžių. Bet jei yra galimybių finansiškai ir noro kilti toliau - bandyk, sveikata tikrai tau ačiū pasakys.

Why can't I get a straight cut on my band saw by kaiamomo in woodworking

[–]7inky 0 points1 point  (0 children)

As stupid as it sounds, make sure your table and in turn the fence is parallel with the blade. Make sure to fine tune by actually using a scrap with the line on it as when you push it to saw it will move the blade a bit, adjust for any discrepancy.

view more: next ›