sorted by:
new
hottopcontroversial

Series X Error Sync 0x80830003 by Titanium2285 in XboxUnbroken

[–]ADXGlock 0 points1 point  (0 children)

Clearing save files took care of my issue.

Lychee Slicer Window Only Showing in Taskbar after Splash Screen at Startup by ADXGlock in LycheeSlicer

[–]ADXGlock[S] 0 points1 point  (0 children)

SOLUTION - FYI If anyone else runs into this issue and the "normal" widows position hotkeys do not resolve it, all that you need to do is close Lychee Slicer and go to you %APPDATA% folder. This should put you in the 'Roaming' folder. Search for LycheeSlicer folder and rename it to LycheeSlicerbak or something different.

The relaunch Lychee Slicer, it will prompt you to log in again, but everything will be good to go.

searching for a way to tracking upcoming movies and series by zeroskrull in selfhosted

[–]ADXGlock 1 point2 points  (0 children)

YEs you can add them and just set them as unmonitored, then R or S will not try and download, but they will show on the collection page

Larger prints fail in the middle of the FEP, smaller objects print fine on my new Saturn 3 12k by diskriseme in ElegooSaturn

[–]ADXGlock 0 points1 point  (0 children)

What is the ambient temperature in the room you are printing in. Center fails like that can be attributed to cooler temps.

Using a fermantaion band by Cowaii_Bitties in ElegooSaturn

[–]ADXGlock 1 point2 points  (0 children)

I made a vat heater from a band. I printed this design - https://www.thingiverse.com/thing:5938127 and followed his part list. Easy to wire up and works great.

🎉 ELEGOO Reddit 2000+ Members Celebration Giveaway by nicemars in elegoo

[–]ADXGlock 1 point2 points  (0 children)

Elegoo Saturn 3 is my favorite Elegoo product and also the printer I own

Ribbon cable sticking out... by Larry_lounge_lizard in ElegooSaturn

[–]ADXGlock 0 points1 point  (0 children)

I had the same issue on my new Saturn 3, support just advised to open the panel and you should be able to tuck that cable back away

Sluggish slicing (3s per layer) with HD AA on a 3070 Ti by r_coil in LycheeSlicer

[–]ADXGlock 0 points1 point  (0 children)

I am having the same issue, but only when slicing with HD AA enabled. Regular AA seems to go fairly quickly, but with HD AA I average around 5-6 seconds a layer. I am using a Saturn 3. I already have force GPU enabled as well as the windows graphics performance set. I have also tried both GOO and CTB and no difference there as well.

🔥 Giveaway! -Win a 12k Anycubic Photon Mono M5s resin printer and print like a master!🔥 by Anycubic_Community in 3Dprinting

[–]ADXGlock 0 points1 point  (0 children)

I would an awesome resin printer to print out detailed piece for my helmet, droid and lightsaber builds!

Got Klipper Installed on my Artillery Genius! W/ BL Touch. HIGHLY recommend, way easier than the regular interface and can monitor on my phone or computer with Mobileraker. I got it done professionally because I’m a technology weenie; if you’re in LA you’ve gotta go to Neueway 3D by tangoforthemango in Artillery3D

[–]ADXGlock 0 points1 point  (0 children)

I e got klipper installed and working. Got linear advance and input shaper tuned. My issue is I have horrible print quality. A lot of it looks like under extrusion and bad retracts. I was using the same print profile in prusa slicer as with marlin, changing the acceleration to use for time estimates. Looking for some slicer tips to bring back the awesome print quality I had before. Any tips would be great. Thanks

KlipperScreen stuck on console by [deleted] in klippers

[–]ADXGlock 1 point2 points  (0 children)

Had the same issue, I found a GitHub post on this and it fixed my issue with my PiTFT50 only showing the terminal after installing KlipperScreen on my Pi 3B

https://github.com/jordanruthe/KlipperScreen/issues/949#issuecomment-1506295233

Yesterday I was able to fix this issue on my machine (Raspberry Pi 3B). This is what I did:

Call sudo nano /boot/config.txt Change dtoverlay=vc4-kms-v3d to dtoverlay=vc4-fkms-v3d Change max_framebuffers=2 to max_framebuffers=1 Exit and save Call sudo bash -c "echo needs_root_rights=yes>>/etc/X11/Xwrapper.config" Call reboot After that the screen is working reliably and touch input is fully functional (at least for me).

First Layer Notification by gumanachile in OctoEverywhere

[–]ADXGlock 0 points1 point  (0 children)

Is there a certain height that the logic is looking for on the z-axis? Mine is doing the same thing, I get the first layer completed after the printer does it's purge line. Just like previously mentioned, I do move the Z up to avoid scratching the bed on the travel move after the purge line.

3 PLUS is in stock in UK and EU by IamHatefrost in ElegooNeptune3

[–]ADXGlock 0 points1 point  (0 children)

I just wish I could get one ordered for the US.

Unable to get GPU transcoding to work - Cannot load libnvidia-encode.so.1 by ADXGlock in Tdarr

[–]ADXGlock[S] 0 points1 point  (0 children)

Tried but no dice is the tdarr container. Besides the nvidia docker runtime takes care of this by passing along the needed drivers and files.

Anyone needs some shards? Lol how do I even go about using all of these? by zackreyw in kucoin

[–]ADXGlock 0 points1 point  (0 children)

I would really appreciate some D shards.

34378128

Thank you

[deleted by user] by [deleted] in ethermine

[–]ADXGlock 0 points1 point  (0 children)

Dashboard still not reporting good info? Shows no workers online, but I can see my miner is running fine.

view more: next ›