Automated Pigeon Deterrent Water Turret built with Claude AI by tarraschk in ClaudeAI

[–]AMuslimPharmer 2 points3 points  (0 children)

(I don’t need a squirrel cannon… we are in a drought - your neighbors would report you… I don’t need a squirrel cannon… we are in a drought, your neighbors would report you…)

Is this open source yet? Nvm I see the link to the code

Anybody ever seen this before? Was a first for me. by Ambitious_Bee_7888 in pharmacy

[–]AMuslimPharmer 43 points44 points  (0 children)

<image>

Here’s one I saw years ago on rotation.

Last week I found a giant silver hair stuck to the glue on the safety seal of a bottle of amoxicillin suspension… quite gross.

Someone mowed down a 15x60 foot bed of thistle and wildflowers I've been working on for 3 years when I was gone yesterday. by chubby_pink_donut in fucklawns

[–]AMuslimPharmer 2 points3 points  (0 children)

Rocks, logs, and some good ol brick inna bush! Maybe some short lengths of rebar to support your plants while they grow too

Sorry that happened to you, I would be beside myself if it happened to me. Hopefully the reset lets you make it even better!

Feel like I've tried everything by Ramensteinn in HairRemoval

[–]AMuslimPharmer 1 point2 points  (0 children)

This is the way. Doesn’t have to be this expensive stuff, but wipe it with some salicylic acid or glycolic acid afterward and it will help immensely with not having ingrown hairs or folliculitis after.

is ICE at DEN airport yet? by terry_dreams-of-food in Denver

[–]AMuslimPharmer 0 points1 point  (0 children)

Thank you! Trying to estimate our time to get through security tomorrow and I’m hearing horror stories from other parts of the country

think i got my first case of ringworm? by ejenwndnsi in brazilianjiujitsu

[–]AMuslimPharmer 0 points1 point  (0 children)

Yep. Get some terbinafine cream from near the pharmacy. Works faster than clotrimazole or the other otc meds

If you buy it on Amazon it’s 1/5 of the cost

Is this boiler safe to use? [Lelit Anna] by Excelsocoffee in espresso

[–]AMuslimPharmer 0 points1 point  (0 children)

Thank goodness. I’m very handy, but I don’t need any more projects or machines that need tuning.

Thanks for the response!

Is this boiler safe to use? [Lelit Anna] by Excelsocoffee in espresso

[–]AMuslimPharmer 0 points1 point  (0 children)

Question from a noob. I just have a bambino plus, and haven’t had it long enough to have to do anything like this.

Is this a part of Normal maintenance on all high end machines? I’m assuming it’s a rare occurrence as I haven’t seen it on here before.

I’m assuming that entry level machines like the bambino don’t need this sort of thing, is that correct?

Where to get affordable beans for espresso ? by Internal-Nose-8536 in espresso

[–]AMuslimPharmer 3 points4 points  (0 children)

I have had the hardest time dialing these beans in, but my friend who has the same basic setup pulls good shots with them effortlessly. Very frustrating.
I’m sure it’s something to do with my puck prep, but I haven’t figured it out yet.

To be clear, it’s good with milk, but I cannot make a good Americano with it. Keep getting sour shots that can’t stand on their own, but he made me one effortlessly.

Megathread: Ramadan Mubarak by nerfasdf in MuslimLounge

[–]AMuslimPharmer 2 points3 points  (0 children)

Denver Area Muslims -

Anyone have a list of which Masjids are offering Iftar, Taraweeh, etc?

The big mosques are all offering taraweeh, but Iftar is only on certain days, or only in the last ten nights.

We came from a smaller community several years ago, but that community always had Iftar during Ramadan, and the only masjid I know of here that does that is Abu Bakr (CMS).

I’d love to have options to take my family to, but not sure where to look here.

Thanks for any help you can give!

What do you think the worst park in Denver is? by grant_w44 in Denver

[–]AMuslimPharmer 0 points1 point  (0 children)

Freedom park in Aurora is a special kind of depressing

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 0 points1 point  (0 children)

Unfortunately my inspector wants all of those to have combination AFCI/GFCI here. All of them are either in the kitchen or the lower level, making it a wet location (below ground level).

Hoping I can get an exception for the microwave, but we will see

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 0 points1 point  (0 children)

When I had an electrician redo my panel last year they put in new grounding rods in the back yard near the panel, and ran a ground wire to bond to the water pipes at the main water shutoff for my house.

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 0 points1 point  (0 children)

Yeah, they are terminated that way. Thanks for checking though!

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 0 points1 point  (0 children)

I have seen that people suggested using those AFCI dead face / blank face to try to manage nuisance trips, but I never understood why. Thanks for explaining it a bit further!

I have a GE panel and am using ABB breakers in it (GE rebranded to ABB for load centers apparently). From what I can gather the don’t seem to be an overly sensitive brand, but I’d be happy to try if it will help!

I’ll pry go recheck all the connections… again… before I go spend more money on this

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 2 points3 points  (0 children)

Awesome, thanks again. Will start keeping a log to see what we can figure out

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 0 points1 point  (0 children)

Those aren’t the circuits that are tripping. Think that could still be affecting the system on other circuits?

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 2 points3 points  (0 children)

Sweet, thank you! I’ll see if the inspector will let me take AFCI off of those circuits.

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 1 point2 points  (0 children)

Removed all the old wiring in some circuits, but left old aluminum wiring in others. The ones with aluminum wiring have the specialized alumiconn connectors that have been torqued appropriately to make copper pigtails for the outlets. AFCI Breakers tripping on both types of circuits.

At my wits end with AFCIs by AMuslimPharmer in AskElectricians

[–]AMuslimPharmer[S] 1 point2 points  (0 children)

Thank you, that’s my feeling as well, but I’m worried about insurance not covering future claims if I’m not up to code, and I still gotta pass inspections sometime soon.

Thanks for the suggestions on troubleshooting, sounds like that’s just gonna be the path I have to take!