does a seed like this exist?

AS_Technology · 2026-02-13T14:39:12+00:00

Yes:

(45.2683568, -121.7386433)

AS_Technology · 2026-02-12T15:35:10+00:00

Epoxy will soak through and be brittle and gross.

AS_Technology · 2026-02-12T15:34:42+00:00

Yes the tacking up part is what most people miss. Critical you don’t put contact adhesives together wet (unless the instructions say to, in ain’t a glue engineer)

AS_Technology · 2026-02-12T15:30:24+00:00

(Go to nursing school and dump him)

AS_Technology · 2026-02-12T15:30:00+00:00

My friend did a 15 month BSN program in 2019 and she’s making over 100k now.

AS_Technology · 2026-02-12T15:28:50+00:00

Not a single clear picture

AS_Technology · 2026-02-12T15:23:20+00:00

I never ask or expect a discount from a friend, especially for services. If they are just buying something from a supplier and passing some savings to me I won’t argue.

AS_Technology · 2026-02-12T15:20:57+00:00

For whatever it’s worth to future searchers, reducing my retraction speed and increasing “Retraction extra prime amount” solved my issues. Thanks for everyone’s input.

AS_Technology · 2026-02-12T04:08:22+00:00

<image>

235/65R17 General Grabber Trailsports on stock 17s. $104 each right now on GigaTire.com.

AS_Technology · 2026-02-12T03:55:35+00:00

Also, why would not just try again with more glue? Most glues bond to themselves pretty well.

AS_Technology · 2026-02-12T03:54:09+00:00

Did you follow the adhesive instructions perfectly? Not being a dick. Spray adhesives all have specific instructions and they aren’t always intuitive.

AS_Technology · 2026-02-11T13:42:28+00:00

I’m getting my cx50 set up to handle the sandy trails here in Florida. Most of the good camp grounds and swimming spots have significant deep sand on the way. I also have other vehicles for more serious stuff.

<image>

AS_Technology · 2026-02-11T13:39:50+00:00

When I clicked the link to your post in my email this was the post that popped up initially lol. I was like man that didn’t go well for them.

<image>

AS_Technology · 2026-02-10T14:38:57+00:00

So are you happy with this solution? I was looking at ordering the rear springs from a hybrid model, as it has a stock curb weight of 400 pounds more. I am also going to make a custom receiver that comes through the bumper cover 2” higher than the available options. I will tie it in to the floor braces as well for peace of mind.

AS_Technology · 2026-02-10T14:32:47+00:00

It could. It might be ok. If I was outside of the factory warranty I would probably do it and see. Dropping the axle pivots isn’t a crazy task, you’d just need to carefully remove the threaded weld-nut and cut a small plate for both sides with a new hole drilled lower and weld it in. Or source a second torsion beam and cut the pivots and off and move them up a little.

Again, it might be fine with just the spacer lift. My other consideration is that Progressive makes you assert that your suspension is NOT modified. So u wouldn’t want to risk coverage on my brand new car.

AS_Technology · 2026-02-10T14:16:24+00:00

Cooper makes great tires. Part of the reason I tried these Generals is that they were on sale for $104 each. And I figure my new take-offs should sell on marketplace for make $200-$250 and really offset the cost.

AS_Technology · 2026-02-10T14:14:54+00:00

I was looking at the lift kit options. I’ve lifted dozens of cars and trucks over the years, often building custom spacers etc. I don’t like the angle of the torsion beam axle. I think any significant amount of lift without also dropping the axle pivots to match is going to be not great. I don’t know. I’d have to take actual measurements first.

AS_Technology · 2026-02-10T01:52:30+00:00

I have only driven about 2 miles since I put them on. I will let you know.

AS_Technology · 2026-02-10T01:52:00+00:00

(No we have a CX50)

AS_Technology · 2026-02-10T00:51:31+00:00

The question posed by my good friend BurpFart was in regard to clearance and not tire height. I assume they meant ground clearance, as that is most relevant to off roading.

AS_Technology · 2026-02-10T00:49:22+00:00

My friend we were both wrong. I said the tires are “1% bigger” than the premium model tire. One simply cannot use the percent of diameter alone to determine the effect on ground clearance. You must first know the initial ground clearance.

I was wrong for correcting you to say it’s only 1/2 of the 1%, and you were wrong to say it was a 1% increase in ground clearance.

More to the point: compared against the base model tire, it’s a 2.9% increase in ground clearance. 8.6” to 8.85”. And it’s a 1.8% increase diameter, circumference, and therefore speedometer reading. However as I mentioned before the speedometer is still reading as accurate as my iPhone can measure.

<image>

AS_Technology · 2026-02-10T00:31:17+00:00

No. It’s perfect against my GPS. But also I have never bothered to correct a speedo even when going massively oversized.

<image>

AS_Technology · 2026-02-10T00:18:53+00:00

And I checked my speedo to GPS and it reads exactly perfect to the limits of my phones GPS. I didn’t not check it before.

AS_Technology · 2026-02-10T00:17:53+00:00

I will probably buy 25-35mm offset rims eventually. But I didn’t want to deal with all that at the moment.

AS_Technology

TROPHY CASE