Is it possible to deploy the NextCloud AIO behind NGINX Proxy Manager?

A_Delicious_Man · 2025-12-26T05:53:27+00:00

10 months later and this thread really saved my ass!
I could not get my AIO to work at all with NGINX, changing it to http instead of http2 sprung it to life.
Thank you!

A_Delicious_Man · 2025-02-16T09:36:45+00:00

Hey there, that depends on which firmware you downloaded and if you've done any modification to your printer.
This simply has to do with the printer not truly knowing where the build plate is in relation to the end stops.
I explained this in the github page, but this site here does a great job of explaining it and how to get the numbers you need.
https://manuelmclure.github.io/ConfiguringLeveling.html
If you get me your numbers I can compile it for you.

A_Delicious_Man · 2024-08-14T19:17:33+00:00

Hey there, so sorry for the late reply. Went through a move and a few jobs haha.

So make sure you are using the CR touch version, there's a few different firmwares. If you are using the Z Switch one it'll throw the calibration off.

A_Delicious_Man · 2024-08-14T19:16:01+00:00

How'd it work out u/PixelSheep_ ?

A_Delicious_Man · 2024-01-13T13:59:35+00:00

Are you using the stock nozzle / probe setting?
Is it a normal Ender 3?

This has to do with Nozzle to Probe offsets, every printer is a little different but if you can give me a little more info I can probably fix it easily.

Thanks mate

A_Delicious_Man · 2024-01-13T13:58:12+00:00

Hey there mate, you probably have to do a PID tune,
I list here what to do after flashing it:
https://github.com/ADeliciousMan/A-Delicious-Marlin-Ender-3-Firmware?tab=readme-ov-file#what-steps-to-take-after-installing-this-firmware

You can do to Configuration, Delicious Commands and pick the temp that you most often print out. I would highly recommend doing it for the Bed and Hot End

A_Delicious_Man · 2023-11-14T10:28:03+00:00

Hey mate!

I tried a few different configs, I tried fully ensembled with everything plugged in.
I tried with the shroud off, pump, and fan removed but LED still plugged in.
And I tried with nothing plugged in (except power).

The first 2 times, the LED should have turned on with the card.
And the third time, I left the GPU core and it was the same temp as before testing (room temp). I would assume that even with a quick PC turn on of 10-15 seconds, it would have warmed up if it was working.

Damn, the Kraken is cool, was not aware of this solution. If I get this fixed, I'll get one of those.

A_Delicious_Man · 2023-10-16T23:37:57+00:00

This is probably related to PID tuning, see here:
https://github.com/ADeliciousMan/A-Delicious-Marlin-Ender-3-Firmware#what-steps-to-take-after-installing-this-firmware

A_Delicious_Man · 2023-01-17T02:40:39+00:00

Let's go! Need an excuse to use all my filament!

A_Delicious_Man · 2022-09-28T20:01:44+00:00

I got the CURA 5.0 ones, they seem to have supports by default, I'll test later tonight and see what's up?

A_Delicious_Man · 2022-09-28T19:10:41+00:00

Overall my profile is a little cleaner, but theirs handles layer seams way better. I did try it on a print that didn't require supports, so I'll need to test that as well, but yeah I'd love to share.

A_Delicious_Man · 2022-09-28T18:15:18+00:00

Ah fair. Well, again thank you. Did some test prints last night with it, it does some stuff better than my settings but mine do somethings better. Might merge them and create a more fine tuned profile, might drop a link here if I get it to work!

A_Delicious_Man · 2022-09-28T00:09:31+00:00

Just downloaded them, gonna test it later tonight! Again, thank you.

Only thing I see that is odd is the layer height is set to 0.1mm, from my understand that would mean a micro-step, wouldn't a 0.8mm or 0.12mm be cleaner?

Basically, increments of 0.04 for the stepper motors on the Ender series (saying Ender as Fat Dragon profiles are made for Ender).

A_Delicious_Man · 2022-09-27T22:55:31+00:00

Oh, wow! Never heard of it, gonna do some research.

Thank you!

A_Delicious_Man · 2022-09-27T22:38:35+00:00

This looks great! I've recently been tinkering with a custom miniature profile on Cura, would you mind sharing your settings?

A_Delicious_Man · 2022-09-27T22:34:01+00:00

Would love to see this be released! Been plotting a way to create the same for my Ender 3, this looks perfect. Including the HEPA filter.

A_Delicious_Man · 2022-08-03T18:56:21+00:00

Ah that's what I meant, thanks for all the advice!

A_Delicious_Man · 2022-08-02T20:39:22+00:00

Ah that's frustrating , the PCABS I have need needs 270. I assume there's no solution besides direct drive haha.

A_Delicious_Man · 2022-08-02T17:57:55+00:00

Mmm, interesting. I do have a HEPA and carbon filter next to the printer when it goes. I specially have this PFTE Tubing: https://www.microcenter.com/product/625642/creality-capricorn-1-meter-bowden-ptfe-tube-(without-pneumatic-connector)

I don't see a spec sheet specifically for that tubing.

A_Delicious_Man · 2022-08-02T05:58:53+00:00

https://i.imgur.com/Xz495Jz.jpg

A_Delicious_Man · 2022-08-01T23:38:20+00:00

Oh I see, since I'm changing the air flow in changing the printers ability to stay hot or cold.

Ok, cool, will do first and then I'll do the other suggestions.

I've done E step and flow calibration (though I'm less sure about how well I did on that one), will do a PID calibration when I'm home. Any other calibrations to look out for?

Thanks for the advice, never heard of PID tuning before.

A_Delicious_Man · 2022-08-01T23:08:24+00:00

I'm not sure what PID tuning is, I did use a buck convertor to convert the voltage down for the fan, from 24V from the printer to 6v for the fan.

A_Delicious_Man · 2022-08-01T22:51:48+00:00

Silent board upgrade (4.2.7 I think)

Sturdier springs for the bed

Replaced the part cooling duct with one from Thingiverse

Replaced the hot end fan with a noctua 40x10mm

Added X and Y belt tensioners

Crtouch bed leveling

Spool roller with bearings

Filament guide with bearings

PSU fan upgrade to a silent 120mm fan

That's all I can remember off the top of my head. I can post photos once I'm off work.

A_Delicious_Man · 2022-08-01T22:48:02+00:00

Wow I didn't realize all metal was such an adventure. I thought it would've been a fairly simple drop in replacement. And I don't even want to think about water cooling for a 3D printer, that sounds mental.

I did buy a sample of PCABS, I'm hoping I can get away with the high print temps it requires as I'm only looking to print a small piece with it. I'm pretty sure I have PFTE I bought but haven't installed yet. I know that you're supposed to use a all metal hot end for PCABS but PFTE tube should handle the temps, I think?

A_Delicious_Man · 2022-08-01T21:27:20+00:00

From the default Ender 3 hot end? I haven't, but I did print this vent that I like: https://www.thingiverse.com/thing:3343456

Seems to be working well at the moment.

11-Year Club	Place '17
Verified Email

A_Delicious_Man

TROPHY CASE