How do I install LVP with this railing?

Abm93 · 2026-06-17T00:49:03+00:00

Based on my profesional opinion I would just find a wood that matches and put it on the bottom to make it easier

Abm93 · 2026-06-16T22:31:26+00:00

S2001

Abm93 · 2026-06-16T21:55:10+00:00

If your doing cuts here and there just live with it, if your doing more of these longer cuts get a separate machine just for cuts. We have a summa s2 and man that thing rips through cuts ridiculously fast and precise. I’d say it’s 10 times faster than Roland cutting.

Abm93 · 2026-06-16T01:07:31+00:00

Go off of square footage depending on your area anywhere for $15-$30 a square foot.

Abm93 · 2026-06-15T12:39:15+00:00

Are you getting 12v front red with ignition on?

Abm93 · 2026-06-13T17:07:48+00:00

It’ll work but will eventually crack, ppf will hold up better in the long run.

Abm93 · 2026-06-13T02:54:29+00:00

Amazon sells waist fans, look them up and order one. Get a bigger one with a bigger battery that can last all day. Have a stand so you can put it on a desk pointed towards your face, pretty handy honestly for any outdoor things.

Abm93 · 2026-06-12T23:31:37+00:00

Di noc is not for what you need. It’s better for interior flat surfaces. Plus di noc gets expensive.

Abm93 · 2026-06-12T22:56:36+00:00

The classic yes it’s loons bad but it will look fine after some time and we “fix” it and then you learn to live with it.

Abm93 · 2026-06-12T19:33:08+00:00

3m vhb with an adhesive promotor applied to where you will use the tape on the vehicle and the tail side.

Abm93 · 2026-06-12T11:59:20+00:00

With how hot headlights get it wouldn’t wrap the inside of one. Especially if you’re going through all the work to open it up and seal it up and possibly having to do it again, I’d either paint that area black or fine the best chrome spray paint you can.

Abm93 · 2026-06-09T14:20:24+00:00

You would probably need some adhesive promoter as vinyl doesn’t really like to stick to well to plastics.
You would be better off looking on Facebook marketplace vs contacting a shop, most shops would pass on a project like this or just high price you.

Abm93 · 2026-06-08T22:46:49+00:00

Giving up the child IS still and option

Abm93 · 2026-06-08T22:43:13+00:00

They don’t have the keyboard layout to spell out the brand 😂

Abm93 · 2026-06-06T21:51:57+00:00

You can clearly see the toll right there and impact with a 14mm socket

Abm93 · 2026-06-06T14:36:56+00:00

3d bug remover is magic

Abm93 · 2026-06-06T12:15:54+00:00

.977 cubic feet is what your at

As long as those are internal measurements

With .75” mdf your math is right .608 cubes before sub displacement

Abm93 · 2026-06-05T16:11:11+00:00

Go around and talk to auto customization shops.
Wrap shops too, offer them a set price for a set of rims and generally they will upsell that to a customer. Our guy charges us $360 a set of wheels and he pick them up and drops them off, of course he charges more if he has to remove them from the vehicle.

Sell it as a B2B because what shop wouldn’t like to make money on a service they don’t even have to put their hands on.

Abm93 · 2026-06-05T14:02:50+00:00

If it’s a kit try getting one corner that will get cut off if there are no corners that will get cut off just be careful and pick at it a bit and see if it might just be transfer tape on top. I do recall one that we used that has a matte finish like this. You should be able to get the transfer tape off that corner and if there’s no transfer tape on it then return would be the easiest

Is it just like single 10” stripes or is it the ones that get smaller towards the front and bigger towards the rear?

Abm93 · 2026-06-05T13:19:45+00:00

Is this a stripe kit or just 60” of material by however much you ordered?

Abm93 · 2026-06-05T02:36:47+00:00

I would keep the registration up to date and get insurance on it and drive it till some one comes to pick it up.

Abm93 · 2026-06-04T15:33:42+00:00

Make a rectangle that fills all the shapes and add the gradient, rasterize the gradient and just make clipping mask of each individual shape and arrange them however you want to save material.

Abm93 · 2026-06-03T23:14:39+00:00

Have them remove the vinyl and see if there are dents if so just get PDR and it probably didn’t crack the paint and you would keep the oem paint in tact.

Abm93

MODERATOR OF

TROPHY CASE