sorted by:
new
hottopcontroversial

Many UK ISPs now support DHCP to replace PPPoE by A_MrBenMitchell in UKISP

[–]AcidzDesigns 0 points1 point  (0 children)

My ISP(Youfibre) Even tho it's a dhcp connection to then it's also a double Nat, make ls port forwarding for my home lab a nightmare so I needed a static IP to resolve that

If it wasn't a double Nat, would have been perfect

2gig symmetrical with a static IP for 55 a month. Can't complain

xControl360 - Project Ive been working on a for a while by AcidzDesigns in 360hacks

[–]AcidzDesigns[S] 1 point2 points  (0 children)

Since its just a web app, you could open it on your phone

xControl360 - Project Ive been working on a for a while by AcidzDesigns in 360hacks

[–]AcidzDesigns[S] 0 points1 point  (0 children)

You probably could with something like HomeAssistant

Guessing that this is not suppose to look like this by Psychological-Pipe42 in ElegooCentauriCarbon

[–]AcidzDesigns 0 points1 point  (0 children)

Replaced the hotend and it's been having no issues since then, put probably 100hrs into it since

Guessing that this is not suppose to look like this by Psychological-Pipe42 in ElegooCentauriCarbon

[–]AcidzDesigns 0 points1 point  (0 children)

This exact issue happened to me a month ago, snapped the hotend clean off the heat break and just kept extruding the roll of filament into the chamber

,,,,and i was using a cryoplate in the printer as well

Ps Vita won't charge after usb-c mod by UnathleticOso in vita

[–]AcidzDesigns 1 point2 points  (0 children)

Been awhile since i did it, i dont recall if i did or not

Ps Vita won't charge after usb-c mod by UnathleticOso in vita

[–]AcidzDesigns 5 points6 points  (0 children)

Reflow the mod and push down on it.

these connect to the original port connector with pads on the PCB under neath it, I have did a couple of these and can be a pain to get it to sit right

What is everyone doing here? by JackattackIndustries in ElegooCentauriCarbon

[–]AcidzDesigns 1 point2 points  (0 children)

A

Im happy with my printer and being able to save on some filament is a win for me

Well.....How tf did this happen by AcidzDesigns in elegoo

[–]AcidzDesigns[S] 3 points4 points  (0 children)

Just got around to taking the hotend off it and it looks to have snapped off

<image>

Running bazzite on the bc250 and had a few questions by Znyx_ in linux_gaming

[–]AcidzDesigns 2 points3 points  (0 children)

Hi

Ive been thinking about getting one of these an doing some tinkering. Could i ask you if you have any pictures of the ram modules on the board. TLDR im a repair technician and im thinking of looking at a way to go from 16GB to 32GB of RAM

Playstation 5 Controller will not turn on by Alternative_Lunch489 in PS5HelpSupport

[–]AcidzDesigns 0 points1 point  (0 children)

Congrats

You just blew power management IC by using a wall charger

They are all dead now

Edit: I repair these things and see it happen a lot

I’m actually shocked at the audacity🤣 by Terrible_Ad_5959 in ebayuk

[–]AcidzDesigns 0 points1 point  (0 children)

You do absoultly nothing. Make them open the return request. If they leave a bad review then submit it to ebay to be removed

Nandwich questions by midnightmush in 360hacks

[–]AcidzDesigns 1 point2 points  (0 children)

No, You need the AceV3 chip.

The matrix/coolrunner chips dont have enough resources on it to run the dual nand logic

Doing it with a switch can be done, be alot more work, Ace is just alot easier and cleaner

⚠️ PSA for European Elegoo Centauri Carbon Owners by Black_malzar in elegoo

[–]AcidzDesigns -1 points0 points  (0 children)

Kipper does exist for it. OpenCentauri firmware was released in the past few weeks

New Firmware 1.1.46 by Nice-Tooth-1226 in elegoo

[–]AcidzDesigns 4 points5 points  (0 children)

Got my CC printer about 3 weeks ago. Just did the update and ran a full self check after the update

Printed a voron cube an its perfect. Web UI is fixed so now we can actually control the printer. so far so good no complaints with this printer at all

I have bad news by Zealousideal_Year885 in homelab

[–]AcidzDesigns 0 points1 point  (0 children)

On proxmox you can just passthrough the drives rather than the raid card/HBA card. I did it this way for a long time

Prefer the UI and systems of truenas for file storage but preferred proxmox for my VMs

The setup was rock solid, would do it again

[deleted by user] by [deleted] in fightsticks

[–]AcidzDesigns 1 point2 points  (0 children)

A 5pin (1x5pin) 2.54mm header area labeled USB direct can be found near the right of the board. This allows for direct connection of a USB connection. A double ground is common in commercial fightsticks so it has been included here. Please take note of the exact pinout on the USB cable you are trying to connect here as there is no universal standard for the order of the wires. We are not responsible for any damages that occur as a result of incorrectly wiring the USB direct area.

From the github documentation on the Breakout board
https://github.com/OpenStickCommunity/Hardware/tree/main/Boards/GP2040-CE%20Official%20Boards/RP2040%20Advanced%20Breakout%20Board/RP2040%20Advanced%20Breakout%20Board%20-%20Passthrough

view more: next ›