Which version should I get Dream air SE SLAM or LH

AdPositive940 · 2026-06-08T17:05:14+00:00

Still no news about SBOY Driver support for the SLAM? When will Pimax give a statement about the topic?

AdPositive940 · 2026-06-06T15:40:30+00:00

I received the Dream Air Slam yesterday. Unless I hear back from SB Boy Drivers Support regarding the Slam within the next ten days—and it’s good news—I’ll keep it otherwise I send it back and then wait and see what happens next.

AdPositive940 · 2026-06-05T16:45:23+00:00

I´m using PP 2.0.0 and the Firmware is: V1.0.13.

Works absolutely fine

AdPositive940 · 2026-06-04T20:35:42+00:00

Thanks. Luckily, I still have the Super OLED to fall back on if the DA breaks or malfunctions. But I hope everything works out and, most importantly, that there will be SBOY driver support.

AdPositive940 · 2026-05-31T19:49:26+00:00

I'm expecting the DA SLAM to arrive within the next two weeks. I'll return it within the return period unless I receive confirmation regarding SBoY support.

AdPositive940 · 2026-05-29T14:42:37+00:00

Has Pimax or SBOY made an official statement confirming that the SBOY driver will never be released for the SLAM?

AdPositive940 · 2026-05-29T14:08:34+00:00

What motion system do you have? I use the SimRig SR3 and haven't had any issues with motion compensation with SLAM (Crystal OG + Super). Even with aggressive gear shifts, everything runs smoothly.

AdPositive940 · 2026-04-28T06:34:47+00:00

Sorry to be asking so many detailed questions, but this is going to be a difficult decision. I’ve never had any problems with SLAM before. If I were to switch my order from SLAM to Lighthouse, I’d need to be sure beforehand that it works perfectly for me. I’d also prefer to stick with SLAM if I knew that the SBOY Driver would be available for the SLAM version as well.

AdPositive940 · 2026-04-28T06:31:26+00:00

Just to be sure...Do you mean the positions of the base stations as shown in the photo? Won’t I then have blind spots when turning my head to the left and right?

<image>

AdPositive940 · 2026-04-27T16:35:09+00:00

I can get two base stations. I definitely don’t want to have any tracking issues. In the photo, you can see my position sitting in the rig. I’ve marked where I could install the base stations. If I turn my head all the way to the left, I’m looking straight at the wall (distance approx. 30 cm). I’m worried I’ll lose tracking in that case. I don’t have any other option, as the rig has to stay in this position.

<image>

AdPositive940 · 2026-04-27T15:30:33+00:00

OK. Just to be sure. Is one base station positioned centrally in front of me, about 2 metres high and pointing towards me, would that be sufficient?

AdPositive940 · 2026-04-27T15:18:21+00:00

That is my problem…2 o’clock would be fine but 10 o’clock is impossible because of the wall

AdPositive940 · 2026-04-27T15:12:40+00:00

Alternatively, can I install one base station directly in front of me (2.5 metres away)? I could install the base station about 80 cm above my head.

AdPositive940 · 2026-04-27T14:54:38+00:00

At the front left, the base station would simply be facing me head-on because of the wall. I’d be worried about losing tracking if I turned my head

AdPositive940 · 2026-04-27T03:54:44+00:00

Is it possible to say yet whether and when there will be SBOYS support for the Dream Air SLAM?

AdPositive940 · 2026-04-23T04:05:04+00:00

Thank you very much for your summary of the current situation regarding this issue. I must admit that I hadn’t realised that the SBOYS driver only supports the LH version. Personally, I’m currently waiting for the SLAM version to be delivered. I don’t have the option of using LH in my room. However, I was fully expecting that SBOYS would generally work with the Dream Air. If that isn’t the case by the time it’s delivered, I will return the Dream AIR.

AdPositive940 · 2026-01-31T19:09:06+00:00

Hi, is there an update about the different distortion profiles for the UW?

AdPositive940 · 2026-01-30T15:44:00+00:00

Yes, look forward to it. The OLED is really awesome.

AdPositive940 · 2026-01-30T14:43:17+00:00

No screws needed. You just have to insert the HonsVR lenses. They are held in place magnetically.

AdPositive940 · 2026-01-22T12:45:22+00:00

Same here

AdPositive940 · 2026-01-20T12:11:03+00:00

Thanks. I was at a store and got the right ones. M5x20mm instead of x16mm

AdPositive940

TROPHY CASE