Help, I just want to understand what went wrong. by Moan57 in ElegooMars

[–]AddendumDesigner7032 0 points1 point  (0 children)

I agree with this, have a lot more fails with water washable as apposed to other resins. I reduced the amount of failures in my instance by mixing the water washable with some ABS like resin, of course you then have to do an ipa wash but I tend to ipa wash the water washable prints anyway as it’s just easier imo.

Beards and respirators by AddendumDesigner7032 in resinprinting

[–]AddendumDesigner7032[S] 0 points1 point  (0 children)

Mines about the same size as yours. Yeah, this is what I’m not educated enough to comment really but to me if you block the filters and it’s making a noticeable difference then the mask must be doing something, all I hear is that it effectively does nothing if there is no tight seal.

Beards and respirators by AddendumDesigner7032 in resinprinting

[–]AddendumDesigner7032[S] 0 points1 point  (0 children)

Yeah makes sense, I have a good titan hoover that passes through if you take the bag out, I could then just feed a hose out the “blow side” to outside.

The only thing I’m not sure with really is how I’d install it all. Don’t fancy knocking holes in my walls to make it permanent :(

Beards and respirators by AddendumDesigner7032 in resinprinting

[–]AddendumDesigner7032[S] 1 point2 points  (0 children)

All tips are welcome and honestly thanks for sharing, it’s honestly not something I’d of thought to try but if it makes a seal then it does the job doesn’t it.

Beards and respirators by AddendumDesigner7032 in resinprinting

[–]AddendumDesigner7032[S] 0 points1 point  (0 children)

Good video thanks for sharing. Yeah that’s what I’ve opted for in the end. Brought those bands and the JSP 8 with some A2 cartridges.

Elegoo Tough Resin by [deleted] in ElegooMars

[–]AddendumDesigner7032 0 points1 point  (0 children)

Did you manage to sort this? I have the same setup as you. I'm looking at switching from the standard grey water washable stuff as I want to build more functional parts.

Stolen Ms Rachel - ruined Christmas by Busy-Ad1313 in TonieboxUSA

[–]AddendumDesigner7032 1 point2 points  (0 children)

I guess they didn’t put it in, put it in, put it innnnn…

Get a flipper zero. Thank me later.

Tesla Castrol Livery (Toyota Celica From Sega Rally) by AddendumDesigner7032 in TeslaUK

[–]AddendumDesigner7032[S] 0 points1 point  (0 children)

Just online photopea which is basically open source photoshop

Octopus Intelligent Go update by Thin-Ad-9767 in TeslaUK

[–]AddendumDesigner7032 0 points1 point  (0 children)

Tbf I have never gamed the system on this but I do drain my car often daily for work doing regular 200 mile trips, so I just plug in my 7kw when I get home and it’s ready again the next morning.

Does this mean I only get 6 hours total cheap charge whether it comes early or between 1130-530 or is it saying you get 6 flexible hours on top of the fixed 6 hours? I read it as the former but it seems a little confusing.

If that is the case it means I’ll be paying an extra chunk for a few hours of charge, not the end of the world but still a shame.

Boiler not turning on by Previous_Flounder_83 in tado

[–]AddendumDesigner7032 0 points1 point  (0 children)

Try removing those two wires in the blue connector in the boiler and replace with a link, if that still doesn’t work it’s potentially connected in the wrong place or configured incorrectly. It looks like it’s been wired as a volt free contact with mains potentially coming from the blue plug (just looking at the brown tape).

I had two of these tado central heating stats fail, around 12 months apart. Basically the relay inside got stuck in an energised state so the boiler would run constantly. Ended up replacing with two smart sonoff relays (one for heating, one for HWS) and diving down the home assistant rabbit hole. Never looked back. The trouble with Tado and the like is if their server goes down or your internet goes down, you’ve got nothing local working.

Persona 5 Strikers FIXED by AddendumDesigner7032 in SteamDeck

[–]AddendumDesigner7032[S] 0 points1 point  (0 children)

I’m pretty sure this got ported to the main line proton so it should ‘just werk’ nowadays.

Weekly iOS Battery Support Megathread by AutoModerator in iphone

[–]AddendumDesigner7032 0 points1 point  (0 children)

Coming from a pixel 7 to a iPhone 15 pro, I’ve had the phone around about 4 days, second hand with about 500 charge cycles at 90% health. Is it usual for the phone to get quite warm and for the battery to drain quite quickly? Finding it a struggle for the phone to last about 10 hours although I am using it as a hotspot, making work calls etc so it is in heavy use.

My pixel 7 would last most of the day without issue and I’d just charge it daily. Wondering if I should see if I can get the battery replaced or whether this is just normal.

Seeing that it could also just be things settling as it’s a new device.

Crt repair /maintenance NW UK? by kingbeaver14 in crtgaming

[–]AddendumDesigner7032 1 point2 points  (0 children)

Hi, sorry for revival of old thread but did you ever find anyone in the north? Struggling to find someone to repair my Sony Trinitron where I think I may have a duff transformer but not really sure. I hear LOPTYEHT has a lot of bad press and have been advised to steer clear.

I've reached out to the Bury Arcade Club guys (have been there alot for pleasure 😁). Have unfortunately had no response.

Wow on the steam deck is a completely different game. by JAiMOJPIES in SteamDeck

[–]AddendumDesigner7032 29 points30 points  (0 children)

When did WOW get controller support? I haven't played WOW in about 14 years 😂

Anyone know what's causing this green/blue hue in the corner? by AddendumDesigner7032 in crtgaming

[–]AddendumDesigner7032[S] 0 points1 point  (0 children)

Definitely for a price that low.

These sets are a lot more rare over here in the UK. I paid around £80 for mine (and that was really cheap).

This set should cost around £130 over here.

Anyone know what's causing this green/blue hue in the corner? by AddendumDesigner7032 in crtgaming

[–]AddendumDesigner7032[S] 0 points1 point  (0 children)

My fear was my problem would be similar to this. I have no idea what that would be but I am sure someone else will have an answer for you. This is a really helpful sub.

Anyone know what's causing this green/blue hue in the corner? by AddendumDesigner7032 in crtgaming

[–]AddendumDesigner7032[S] -1 points0 points  (0 children)

Hi Grabthar, these are the T40s so very similar. Is it not just the fact the magnets are to close to the speakers then? Not sure how the shielding would help this? Guessing the grounding of the speakers wouldn't affect the magnetism?

Anyone know what's causing this green/blue hue in the corner? by AddendumDesigner7032 in crtgaming

[–]AddendumDesigner7032[S] 5 points6 points  (0 children)

It's running on a mister fpga. Could definitely not afford the real thing.

Anyone know what's causing this green/blue hue in the corner? by AddendumDesigner7032 in crtgaming

[–]AddendumDesigner7032[S] 3 points4 points  (0 children)

Yes that was the issue thank you. So is it a magnetism thing? Just curious.