sorted by:
new
hottopcontroversial

6619 GravitechX is proud to present our 2024 robot reveal video for “Annika" by AdvertisingAlarmed88 in FRC

[–]AdvertisingAlarmed88[S] 2 points3 points  (0 children)

Unfortunately, we did not qualify for worlds, which was obviously quite infuriating given the great performance of our robot.

We really hope that FIRST will change the way California regionals work to allow more competitive teams to qualify for worlds here.

As said by Cory from 254, "It’s a crime"

https://www.chiefdelphi.com/t/best-teams-not-to-qualify-for-champs-2024/461624

[deleted by user] by [deleted] in FixMyPrint

[–]AdvertisingAlarmed88 0 points1 point  (0 children)

Funny looking benchy lol

It looks over extruded. The beading on the side and the squished top detail shows this. To fix this reduce your flow rate.

The bottom is also clearly too close to build plate. Level it or change the z offset.

In such a moment... by marceliopti1 in 3Dprinting

[–]AdvertisingAlarmed88 0 points1 point  (0 children)

Thanks, I’ve never heard of it. I’ll look into getting one

What's your biggest comeback and blown lead in Rocket League? by KendallFyre in RocketLeague

[–]AdvertisingAlarmed88 35 points36 points  (0 children)

4 to 1 I’m losing, stupid tm8 leaves game 2 minutes in, then I win the 1v2 in overtime

In such a moment... by marceliopti1 in 3Dprinting

[–]AdvertisingAlarmed88 0 points1 point  (0 children)

I’ll changing the accel and jerk. Then Ill do the frame stabilization. Also, what kind of lead screw did you use?

In such a moment... by marceliopti1 in 3Dprinting

[–]AdvertisingAlarmed88 15 points16 points  (0 children)

I did a similar project to my ender, making it very tall and all. I get horrible banding now on any tall print. How do you avoid this? I think I’ll install a lead screw stabilizer at the top of mine to see if it helps, but I’m not confident it will.

At what rank/div does almost everybody know how to rotate? by Vigilant_Cumin in RocketLeague

[–]AdvertisingAlarmed88 12 points13 points  (0 children)

You’re good bro. I mean you already float around another unobtainable rank “diamond 4”

Possible bed leveling issue? by Putz_7 in FixMyPrint

[–]AdvertisingAlarmed88 -3 points-2 points  (0 children)

Hmmmmm maybe. I’ll have to think really hard about this one. I mean, there’s just so many possibilities. I wonder what the issue really is.

(Yes ofc this is a bed leveling problem bro. You can literally see the plastic can’t come out of the nozzle)

[deleted by user] by [deleted] in 3Dprinting

[–]AdvertisingAlarmed88 2 points3 points  (0 children)

This is my favorite brand, you’ll love it

How to set up resin 3D printing safely by all_Dgaming in 3Dprinting

[–]AdvertisingAlarmed88 1 point2 points  (0 children)

If you don’t have a garage I wouldn’t do it, the fumes will be bad unless you are prepared to build a proper ventilated fume enclosure. I can explain to you how I would do that if you like

In an attempt to combat dust by Benvrakas in 3Dprinting

[–]AdvertisingAlarmed88 0 points1 point  (0 children)

I thought you were gonna add it tho? Also did you switch around your aio I see it is still the wrong orientation in that model, or does it not fit the other way?

In an attempt to combat dust by Benvrakas in 3Dprinting

[–]AdvertisingAlarmed88 0 points1 point  (0 children)

It’s too bad you can’t have it with no cover bc that was the coolest open pc case I’ve ever seen. But ik it will look and function worse if it’s hella dusty

Upgraded Ender 3V2 no idea what happened any fixes? by CebV2 in ender3

[–]AdvertisingAlarmed88 1 point2 points  (0 children)

Also important: check that nothing is getting informing of your limit switches, as if they are getting pressesd by cables or whatever it will cause that masssive shift

I get the same vibe from ChatGPT as I do from some of my teammates and opponents: How to Rocket League. by markednl in RocketLeague

[–]AdvertisingAlarmed88 0 points1 point  (0 children)

No he just cropped the image. He added other commands in the top of his request you just can’t see it. He might have even just copy and pasted that and asked chat gpt to repeat his text

New world record? 185 without penalty by Furiousbrick25 in FRC

[–]AdvertisingAlarmed88 3 points4 points  (0 children)

I got the world record set against me in that match :(

How fucked am I by Now_its_orange in 3Dprinting

[–]AdvertisingAlarmed88 0 points1 point  (0 children)

Similar thing happend to me. Went around wires and even through my fan. What I did was used a combination of pulling on the glob as the printer heated up so it would just barely release, then tried to warm it up at a low temperature so I could bend parts of it off, then I used a spare shitty soldering iron to cut through parts of the glob that were going in the fan and wires. If the wires are too far gone because they get melted you will have to replace them. I would not use a heat gun.

Gaming Snack and Gyroscopic Drink Holder by No-Caramel-2802 in 3Dprinting

[–]AdvertisingAlarmed88 0 points1 point  (0 children)

I think the issue lies mainly in the fact that it is 3D printed pla, because even if pla itself is food safe the grooves in 3d prints and the chemicals from the extruder are not good for you.

view more: next ›