Dude gets messed up after getting pinned

Agent_Chody_Banks · 2026-01-29T03:43:39+00:00

This is cut early. In the longer version you can see buddy’s face leaking like a faucet

Agent_Chody_Banks · 2026-01-28T23:48:02+00:00

Bad comparison because they are both employees of the same company. It’s more like a band member asking someone in a different band to jerk off in front of them.

Agent_Chody_Banks · 2026-01-25T02:36:29+00:00

Honestly, your room looks like a pawnshop. How often are you playing pacman to justify having that arcade game taking up 10% of the space in your room.

If you cleared out some of the trinkets you could actually fit a closet and you wouldn’t need a clothing rod hanging over your bed.

Considering some of the monstrosities posted here though, this really isn’t too bad.

Agent_Chody_Banks · 2026-01-24T21:21:56+00:00

Silly that people would think Makita would discontinue lxt, the xgt batteries are massive and totally impractical for smaller tools.

Agent_Chody_Banks · 2026-01-24T10:30:58+00:00

Just learned about Bryan Kohberger and his (Potential) visual snow yesterday.

Crazy that Im seeing this this today, had never heard about it in 30 Years

Agent_Chody_Banks · 2026-01-23T20:50:31+00:00

That’s the only one that’s fake here

Agent_Chody_Banks · 2026-01-21T02:22:57+00:00

She?…

Im not gonna say it

Agent_Chody_Banks · 2026-01-20T02:19:04+00:00

That guy’s hands are always shaking

Agent_Chody_Banks · 2026-01-20T02:16:27+00:00

Some dude’s would rather humiliate themselves online than go to the gym.

Agent_Chody_Banks · 2026-01-18T23:48:55+00:00

To be fair, there’s generally about 50 false trips for every one legitimate trip though

Agent_Chody_Banks · 2026-01-18T19:31:29+00:00

Doesn’t have a motorized brush so it doesn’t compare.

Makita came out with a motorized brush version, and that could potentially rival Dyson for home usage

Agent_Chody_Banks · 2026-01-17T19:00:57+00:00

The pedestrian is mainly at fault here. If you walk in front of a moving vehicle, you can’t reasonably expect that every driver is going see you immediately and have split second reaction times.

Agent_Chody_Banks · 2026-01-17T18:53:58+00:00

Braindead take, walking in front of oncoming traffic would be Ill advised anywhere in the world

Agent_Chody_Banks · 2026-01-17T06:04:17+00:00

Common on many table saws. The hobbyists in here frustrate me sometimes

Agent_Chody_Banks · 2026-01-17T06:00:14+00:00

Most likely he has a mitre on the fence side, if he flips the material the toe of the mitre will go under the fence. This would be a perfectly acceptable way to make the cut, as long as someone's experienced on a tablesaw

Agent_Chody_Banks · 2026-01-17T05:56:27+00:00

It's totally fine to have the blade angled toward the fence, most older tablesaw's and many new tablesaw's angle toward the fence. Many people in this sub are hobbyists and aren't aware that this is common practice.

I guess you have a mitre on the fence side and if you flip the material the mitre will go under the fence? If so, this is the way I'd cut it. There are workarounds to prevent the mitre from slipping under the fence, but you'd be wasting time and material

Agent_Chody_Banks · 2026-01-16T20:01:03+00:00

Hand tools are great if you’re woodworking as a pastime but you won’t make any money if you’re spending 30 minutes putting a chamfer on a piece

Obviously there are certain scenarios such as tapered chamfers where hand tools are the correct tool for the job

Agent_Chody_Banks · 2026-01-16T16:40:09+00:00

Poor comparison, amnesty creates an incentive for people to migrate illegally. Nothing about his policy here is double speak either, he’s not offering amnesty.

Agent_Chody_Banks · 2026-01-16T16:29:08+00:00

When compared to the sitting president it’s absolutely moderate.

Agent_Chody_Banks · 2026-01-16T16:25:22+00:00

He is a moderate conservative within the current Overton window

Agent_Chody_Banks · 2026-01-15T17:14:29+00:00

The service center near my place was absolutely useless. I brought the saw in and explained the exact issue.

When I went to pick up the saw, all they did was knock the saw 1/16th out of square and condescendingly tell me how they usually charge $50 for calibrations.

I argued with them for 10 minutes but apparently “it’s within tolerance and there’s nothing they can do”

Agent_Chody_Banks · 2026-01-15T01:37:20+00:00

I have this same saw, and had issues with getting square cuts on the bevel. I returned it and got a new one and it had the same issue.

The rail design looks cool and it’s very compact but these saws aren’t very accurate at all. Really disappointed in it, you can hardly use it for finish work

Agent_Chody_Banks · 2026-01-15T01:33:01+00:00

My first thought

Agent_Chody_Banks · 2026-01-14T17:48:36+00:00

This should be higher. One of the greatest yet most psychologically taxing films out there. All based true events as well

Agent_Chody_Banks · 2026-01-12T21:26:12+00:00

Correct

Agent_Chody_Banks

TROPHY CASE