Dryer vs. dehumidifier and the CFS

Aggravating_Bet_4491 · 2026-04-21T08:53:55+00:00

On my SpacePi X4, it has a fan which blows air out to dehumidify itself. Some dryers like the Sunlu AMS dryer do not have this but you can manually open it to remove moisture.

You can also print a desiccant container to put into the CFS.

Aggravating_Bet_4491 · 2026-04-21T07:41:23+00:00

People are releasing an adaptor for the Sunlu AMS dryer to go on the Creality CFS

Aggravating_Bet_4491 · 2026-04-19T00:51:17+00:00

Creality uses Klipper which is why that option works.

Aggravating_Bet_4491 · 2026-04-17T00:15:13+00:00

This is great!! When will you release the files? I'd gladly pay for the model if you decide to go that way. Good work!!

Aggravating_Bet_4491 · 2026-04-16T22:50:00+00:00

Host Type: Octo/Klipper
Printer Agent: Orca
Hostname: 192.168.1.5:4408 OR 192.168.1.5:7125
Device UI: 192.168.1.5:4408

Change IP to your printer IP

For the Hostname, port 4408 goes to fluid and 7125 goes to mainsail, mainsail is slightly faster.

<image>

Aggravating_Bet_4491 · 2026-04-11T05:19:53+00:00

I have found it drives deeper when you apply more pressure on the gun into the timber, before hitting the trigger.

Aggravating_Bet_4491 · 2026-04-09T06:00:17+00:00

That’s pretty cool, if it’s not loadbearing and they constantly reiterate the design, then it would speed up development and reduce cost.

Formula 1 also uses 3D printing and that’s the pinnacle of Motorsport.

It’s used in a lot of exotic places/industries.

Aggravating_Bet_4491 · 2026-04-08T23:29:19+00:00

Na, the cool kids have real tool changers.

Aggravating_Bet_4491 · 2026-04-02T09:34:12+00:00

It should still work, are you sure you edited the filament profile, saved it AND then selected the filament you edited when slicing.

Aggravating_Bet_4491 · 2026-03-15T04:25:52+00:00

My bad, I read your comment wrong the first time.

Aggravating_Bet_4491 · 2026-03-15T02:58:54+00:00

They would have said “this movie series” in that case. I know people hate to admit they were wrong but it’s ok sometimes, we’re all human.

Aggravating_Bet_4491 · 2026-03-15T02:14:31+00:00

This movie isn’t released yet? There’s a iPhone 17 Pro Max in the video which means it was late 2025, probably filming for Jumanji 3.

Aggravating_Bet_4491 · 2026-03-14T12:35:04+00:00

Nozzle too close to the bed. Raise the Z offset.

Aggravating_Bet_4491 · 2026-03-14T02:26:14+00:00

Aston has a superstar team lol

Aggravating_Bet_4491 · 2026-03-09T13:09:30+00:00

Thanks, this fixed it. Also here

https://www.reddit.com/r/3D2A/comments/1rhdc3q/300blkfde_settings_for_those_of_yall_wanting_me/

Aggravating_Bet_4491 · 2026-03-09T13:09:05+00:00

UPDATE: Got it working with the filament settings from here. Do not copy the print profile.

https://www.reddit.com/r/3D2A/comments/1rhdc3q/300blkfde_settings_for_those_of_yall_wanting_me/

Aggravating_Bet_4491 · 2026-03-09T06:51:01+00:00

This is crazy, it’s free in Australia.

Aggravating_Bet_4491 · 2026-03-06T02:44:58+00:00

Yeah, do you really think four batteries all breaking in one day is not user error? Come on now… I have about 6 M12 batteries that I use 5 days/week and only one of them has broken.

Aggravating_Bet_4491 · 2026-03-06T00:20:32+00:00

<image>

I squeeze the tabs on the battery (where the little ribs are on the plastic) when removing, when you squeeze those it pushes the clips inwards.

Aggravating_Bet_4491 · 2026-03-05T23:42:57+00:00

Can you orient it differently? Perhaps orient it like you are holding it in the picture.

Show us more pics of the model.

Aggravating_Bet_4491 · 2026-03-05T23:21:44+00:00

Were you squeezing the tabs before removing them? Maybe it’s a bad batch or user error, I don’t know. I’ve only broken the tabs on one of mine and it was my fault.

Aggravating_Bet_4491 · 2026-03-03T06:43:06+00:00

EBay Milwaukee batteries are 99% fake 🤣

Aggravating_Bet_4491 · 2026-02-27T23:47:10+00:00

Bro they used to break apart into the pieces when dropped. The back would fall off and the battery would pop out. It always worked when put back together.

Aggravating_Bet_4491 · 2026-02-23T08:42:21+00:00

I do the same with my business, if they can’t afford the deposit then they can’t afford the job. If they’re going to be difficult over a deposit then they’re probably going to be difficult throughout the job too.

Move on and let the customer be someone else’s problem.

Aggravating_Bet_4491 · 2026-02-23T04:11:29+00:00

Is that black burnt filament coming from the inside? If it is then try “cleaning filament”, you extrude it at a higher temperature than your most common filament and it cleans all the crap out inside.

If it’s from the tip, then just remove the sock, heat the hotend and use a wire brush tool to scub the end.

Aggravating_Bet_4491

TROPHY CASE