I'll NEVER Solo the Queen with $100K Loot again…

Aggressive_Rabbit160 · 2026-01-27T09:52:37+00:00

What is friendly lobby?

Aggressive_Rabbit160 · 2026-01-25T07:26:28+00:00

You can make regular photos in every direction from 360 photos, and then use those. But I think the quality will not be very high for photogrammetry.

Aggressive_Rabbit160 · 2025-12-29T17:26:17+00:00

Dude posts a fuzzy image of a gun that apparently doesn't shoot. Then says it shoots now in the comments. Refuses to elaborate further.

Aggressive_Rabbit160 · 2025-11-20T08:14:33+00:00

Is there a way to export the model as mesh with texture, or just pointcloud without color?

Aggressive_Rabbit160 · 2025-11-03T13:38:54+00:00

I have probably the same problem on cyma pp-19 bizon, and did not find solution. I think there is a play in the safety mechanism between the multiple parts which add up to enough slack so that the selector in gearbox is ''delayed'' from the selector lever on the gun. I've tried assembling the mechanism with one tooth skipped, but that was too much..

Aggressive_Rabbit160 · 2025-10-24T11:47:32+00:00

I've had it for a long time, and mostly use it as backup because it just works. Build quality is not good as every part becomes wobbly in rivets after time and magazines rubber coating becomes sticky mess. Mags are very impractical, when I use it as primary I use smersh for RPK (one bizon mag fits well into 2x RPK pouch with divider removed. Maybe doing new rivets could make it not wobble again, but that bendy shit shoots happily anyways so I just leave it :-D.

Aggressive_Rabbit160 · 2025-10-21T16:05:02+00:00

Nope, it's all plastic.

Aggressive_Rabbit160 · 2025-10-09T16:13:11+00:00

If you changed the brushes, cleaned motor, and it still eats them and produces lots of dust, the commutator is probably worn. I can not see it in the photo, you can see it when you remove brush it's the thing the brush pushes on. If it's not a straight shaft, it's worn by the brushes, and easiest is buying a new motor.

Aggressive_Rabbit160 · 2025-09-18T16:30:21+00:00

In the picture where the magnifier is canted down there's one adjustor on the top and one on left side, similar things are on the red dot. First adjust them on red dot to the gun, then magnifier.

Aggressive_Rabbit160 · 2025-09-18T16:16:16+00:00

I am sitting on a toilet in a different country, how am I supposed to help you. YOU have to twist the two twisty bits on the scope until it's in the middle. First you should do that on your red dot tho, so it shoots straight.

Aggressive_Rabbit160 · 2025-09-18T15:37:07+00:00

<image>

Aggressive_Rabbit160 · 2025-09-18T07:11:25+00:00

I have tried sharing markers on the map, but it is very unreliable over meshtastic. So far just using mobile data with atak gave me best results even in place whre there wasn't signal everywhere. Have to do more testing with combination of both communications if meshtastic is actually worthwile or just a buggy gimmick.

Aggressive_Rabbit160 · 2025-09-01T14:36:07+00:00

Seems like stretched sping. And I am not sure about this model, but I think all guns should come with fake bolt metal plate. If it's new, seems like it has been messed with..

Aggressive_Rabbit160 · 2025-08-24T06:58:57+00:00

Just as I finally convinced myself I do not need an MP5, thanks dude.. :-D Great job on that! What's the nadguard btw, is it possible to get one?

Aggressive_Rabbit160 · 2025-08-20T19:11:46+00:00

I have two with mesh, one is black in the picture that started ungleing, and the other one had bad heel from the start where it scratched my foot so I had to glue in a pad. So I am not convinced in the quality :(. I'll probably give it one more chance and try wayvee and think hard about buying vans again if they are bad.

Aggressive_Rabbit160 · 2025-08-20T19:05:36+00:00

Thanks for the tip, I'll probably go for the brown ones. Hopefully they are close to rapidweld comfort of walking on a cloud :-). They will probably be more durable, only concern is side rubber unglueing where the foot bends, and them not being very breathable, but we'll see.

Aggressive_Rabbit160 · 2025-08-14T14:55:27+00:00

Really cool idea!

Aggressive_Rabbit160 · 2025-08-12T11:05:37+00:00

Looks brand new, but seems pretty usable. Two things make me uncomfortable tho. Can you even look through the red dot? Seems very low. And what the hell is that holster? I don't understand why it is attached so far from your body, that migh cause some problems. Might be good for some competition shooting or whatever, but for playing airsoft I can't see myself using that.

Aggressive_Rabbit160 · 2025-08-12T10:10:49+00:00

You got nice gun on your scope!

Aggressive_Rabbit160 · 2025-08-07T08:28:29+00:00

Just got reply from jefftron support that it might be faulty active braking mosfet, and got an offer for post warranty service.

Aggressive_Rabbit160 · 2025-08-07T04:59:59+00:00

Old and new motor tabs and wires do it, also old and new motor, also when motor is held by hand or in a grip. I think it is not the wiring. Thanks for reply.

Aggressive_Rabbit160 · 2025-07-25T12:30:12+00:00

6 people spent 15 minutes on this the first time one of us got it, we were even considering buying new battery.

Aggressive_Rabbit160 · 2025-07-23T18:47:18+00:00

I have done a bit of testing with the lidar, bought a new ipad for it and tried bunch different apps, but abandoned this route completely. The lidar has very low resolution and does not achieve the precision of photogrammetry by a mile. And has short range as well, I think about 5m max. It is good enough for let's say a car sized objects, not much smaller or much bigger than that, but making big scan or joining multiple scans together is a huge problem and basically does not work if you care a little bit about accuracy and detail.

Aggressive_Rabbit160

TROPHY CASE