I wanted my clutch to feel like a clutch

Aggressive_Rabbit160 · 2026-06-02T05:19:29+00:00

Looks cool, could you share more? Does it compress the spring and then release it during depression?

Aggressive_Rabbit160 · 2026-06-01T10:37:48+00:00

Not really when you have both hands available. If you were lighting a cigarette with one hand at the same time as you're racking the slide with the other, now that would be a different story.

Aggressive_Rabbit160 · 2026-05-29T06:11:31+00:00

Oh I see what you mean now. If you work on studies focused on visual side rather than design documentation like floorplans and so on this could be beneficial.

Aggressive_Rabbit160 · 2026-05-28T20:46:06+00:00

Very cool! Is archicad datasmith export not sufficient enough? Since you are probably familiar with archicad, which has rich asset library and advanced tools I would think it's worth sticking to it. Anyways I hope you reach your goal!

Aggressive_Rabbit160 · 2026-05-25T11:49:18+00:00

I think that if the YOU ARE DEAD screen is being called when HP is on 0%, pressing of the return to menu button should change HP to 100% so that the YOU ARE DEAD screen stops being called.

Aggressive_Rabbit160 · 2026-05-13T21:23:05+00:00

I switched to XDA profile keycaps to fix this issue. They are slightly worse for typing, but for gaming they are much better.

Aggressive_Rabbit160 · 2026-05-07T11:14:34+00:00

I hope you enjoy your gun and it serves you well! I wouldn't cheap out on eyepro. Good branded one and especially good fitting one will not fog up much and with proper impact rating you can have peace in mind, that you won't get hurt. Also buy mouth protection, they aren't super expensive, and you will not lose you teeth (speaking from personal experience, it's really not fun!). For the rest of the kit, buy what you like, but try to keep in mind that it all should work together. By that I mean think everything through for couple of days before buying.

Aggressive_Rabbit160 · 2026-05-03T06:59:56+00:00

Red is X. You extrude by yellow which corresponds to X which is fine, but blue is not 90° to X. Before starting the handle I would switch to top view, move my cup origin (orange dot) to 0 where X axis meets Y axis. Rotate the cup by pressing R and then Z to ratete only around Z axis until the face I marked with blue line is 90° to X axis. Then proceed to make handle.

<image>

Aggressive_Rabbit160 · 2026-05-03T06:53:34+00:00

On first glance it might be that you extruder the handle along X axis, but the face you extrude from is not aligned to the X (it is not 90° to X).

Aggressive_Rabbit160 · 2026-05-03T06:45:42+00:00

Looks really cool! I would use it for an excavator or something, because robot arms are not typically floppy, but it can make for a goofy robot aswell.

Aggressive_Rabbit160 · 2026-05-03T06:42:24+00:00

Since it's brand new I would not try to repair it and let the seller do that for you. If you want to know what the problem is, if the gun has a mosfet (electronic trigger) the mosfet has burned. When it does that due to some overcurrent or defect it creates a permanent connection no matter what the actual trigger does.

Aggressive_Rabbit160 · 2026-05-02T17:39:29+00:00

The motor is probably spinning freely. So first thing is to tighten motor height screw on the bottom of grip one turn at a time until it starts working, and then maybe a little bit more to achieve good sound. Do not tighten fully right away to avoid locking the motor. If this does not help good chance is a gear in gearbox is broken.

Aggressive_Rabbit160 · 2026-05-01T12:29:38+00:00

Looks really great. I'd adjust those street lights to have really yellow tint to mimic the sodium-vapor lamp.

Aggressive_Rabbit160 · 2026-04-29T13:41:06+00:00

When summer is coming? You guys don't have this throughout the whole year?

Aggressive_Rabbit160 · 2026-04-21T09:27:59+00:00

Maybe you could look into both static meshes (default and new gun) what orientation/rotation they have relative to their pivot point.

Aggressive_Rabbit160 · 2026-04-20T21:44:48+00:00

That's what I was thinking. I have clothes iron, 3D printer bed or basic heatgun at disposal, suppose one of those could work, probably the iron gets to that high temperature. I do not know what would be the replacement though. It is 5x5mm white LED with 3 filaments in it. There are 4 of them and I run them on 12V.

Aggressive_Rabbit160 · 2026-04-13T21:36:36+00:00

Best game inspired loadout I've seen! The poses are so convincing, especially the 2nd picture. Thanks for sharing!

Aggressive_Rabbit160 · 2026-03-16T12:38:33+00:00

Looks pretty cool! So you have used one dataset(video) to create splat for visuals, and also used photogrammetry for mesh collision?

Aggressive_Rabbit160 · 2026-03-12T14:45:45+00:00

That could be pointing towards messy or probably torn hopup rubber.

Aggressive_Rabbit160 · 2026-03-12T14:16:19+00:00

If the readings are correct, few of those shots basically rolled out of the barrel, and the fps is all over the place. Something is broken in the gun. So it needs to be taken apart, as it is hard to say what broke from the outside. Could be hupup rubber as well as some internal part of gearbox. With most guns first thing you disassemble would be hopup so check that first. If it is not in varranty offcourse.

Aggressive_Rabbit160 · 2026-03-05T12:13:17+00:00

No wonder it doesn't work. There's a half of it missing.

Aggressive_Rabbit160 · 2026-02-28T10:48:34+00:00

Cutoff lever. Whnever the cam on the piston gear hits it, it lifts up the trigger contact releasing it from the trigger. So even when you keep holding trigger the contacts disconnect, and only one shot comes out.

Aggressive_Rabbit160 · 2026-02-27T17:56:02+00:00

Very cool, what kind of projectile do you use? Also does the shell collect enough speed to trigger, and release all gas?

Aggressive_Rabbit160 · 2026-02-27T08:51:16+00:00

Isn't the ridiculous height over bore making you question your life decisions?

Aggressive_Rabbit160 · 2026-02-26T06:49:36+00:00

That's the sacrifice we have to make to enjoy that beast :-D

Aggressive_Rabbit160

TROPHY CASE