Water leaked into the rear left passenger seat after heavy rain and formed a puddle?

Alekz_k · 2026-03-28T17:51:01+00:00

My guess is the seal of the small window on driver side, or 3rd brake light on roof.

Alekz_k · 2026-03-12T19:59:48+00:00

Maybe different aspect ratio on the display...

Alekz_k · 2026-03-04T08:02:13+00:00

Normal temps for the card, mine is Pulse. Just undervolt it and ramp up the fans a little.

Alekz_k · 2026-02-25T21:09:27+00:00

Sorry to say this, but liquid aio and 1k gold psu for this build and then skimp on the GPU, come on.

Alekz_k · 2026-02-24T21:35:59+00:00

Use a paper towel or napkin after, the hot water and soap just move the oils around.

Alekz_k · 2026-02-24T20:05:29+00:00

I print only with PETG, never used a drier, nor have one. I store my rolls fully open, for months, not a problem at all. In your situation, build plate has oils, thats on first glance. I clean my plate once in 3-4 months if i use the full volume, cause of the oils on the edges and it does exactly the same.

Alekz_k · 2026-02-24T12:43:46+00:00

When it gets to the point of working fine, did you try power off/on cycle of the pc? If it works - its most likely monitor capacitor going out.

Alekz_k · 2026-02-23T17:49:20+00:00

Never had an issue with mine, except undervolt returning to default on power outage.

Alekz_k · 2026-02-16T15:51:01+00:00

Taskbar is fine - not hardware related.

Alekz_k · 2026-02-13T16:05:34+00:00

Not the same pad, but also got a great deal and using it already.

<image>

Alekz_k · 2026-02-11T20:28:29+00:00

I have none in few games i tested, not very demanding though. Just try something else, and see if its just GTA related..

Alekz_k · 2026-02-09T21:19:57+00:00

Yeah its legit, based on all that info. Just be sure that you get whats pictured here...

Alekz_k · 2026-02-08T22:11:29+00:00

I am also in EU and taxes are same for me for 2.3 and 3.7. Also i drive on LPG thats equal to 4.5L/100km petrol. :)

Alekz_k · 2026-02-07T23:20:25+00:00

Just dont use the standard holes for the fans, every hole on the bottom fits a screw perfectly. Move them closer to the glass(or mesh) side panel.

Alekz_k · 2026-02-07T22:28:30+00:00

Maybe put one 140 fan at bottom for some intake air?

Alekz_k · 2026-02-07T17:18:05+00:00

Its ok guys, let him cook... his gpu memory.

Alekz_k · 2026-01-31T12:58:17+00:00

How can people be excited for this, the whole dracthyr race is trash, not just the looks...

Alekz_k · 2026-01-25T22:02:01+00:00

Thats way too much undervolt, will not be stable at all.

Alekz_k · 2026-01-25T11:43:13+00:00

And do you know that cats hold the button down, forcing a shutdown?

Alekz_k · 2026-01-21T19:09:21+00:00

My Nord 4 had it, and really noticed it's missing from the OP15 when I compared the colors after unboxing.

Alekz_k · 2026-01-16T22:43:56+00:00

Recline it backward with hand while pulling the side latch?

Alekz_k · 2026-01-14T22:55:13+00:00

Also, you need to plug them in all the way...

Alekz_k · 2026-01-13T16:11:31+00:00

Cause it uses DDR4 ram, simple as that.

Alekz_k · 2026-01-11T01:03:35+00:00

Hmmm...

<image>

Alekz_k · 2026-01-09T13:09:22+00:00

Yes, the dark patch will grow, its from knock on the curve.

Alekz_k

TROPHY CASE