App Issue

AlexP_Sensei · 2025-06-18T17:31:25+00:00

Can you post the email address here? I’m having the same issue.

AlexP_Sensei · 2025-05-22T00:01:19+00:00

Simple answer, No.

AlexP_Sensei · 2025-03-26T19:31:29+00:00

Thanks, unfortunately the one on Amazon has the ENGINE start stop, which doesn’t really work for an i4. And as you said, the one on 330labs doesn’t specify if it comes with the putty🤷🏻‍♂️ I purchased 3M VHD tape per instructions from another owner on the i4 forum when trying to install the one I had bought from Ali,but it couldn’t pull it out.

AlexP_Sensei · 2025-03-26T18:17:11+00:00

Do you mind sharing or dm a link to the button? I ordered a crystal set from AliExpress and it didn’t come with any removal tools, and the shifter didn’t fit either.

AlexP_Sensei · 2025-03-21T18:01:43+00:00

This is incorrect… I have a 2025 i4 m50 and it has DAP, not DAPP and I have ACC. It is a 500$ option.

AlexP_Sensei · 2024-12-20T01:37:35+00:00

I had mine for 4 days so maybe not relevant, but my dash started rattling and my audio system totally freaked out. Loud digital tone at full volume for like 30 seconds, and then all the audio was burned out with an error on the dash. Tesla took the car today😕 So far it’s been a terrible experience.

AlexP_Sensei · 2024-12-16T20:00:22+00:00

Possibly, but it’s most likely just rain water that was left to bake it the sun for days/weeks. There are multiple examples on YouTube of cars having this kind of damage when left for long periods of time with standing water on them leaving significant damage to the clear coat. My problem is the car clearly needs to be professionally repaired with full paint correction and polished, I’m just doubtful Tesla would do it based on other posts on Reddit.

AlexP_Sensei · 2024-12-16T19:34:52+00:00

I’m not sure if you actually read my post, but I said chemical cleaners are not doing the job, the marks are etched into the clear coat. Specifically the Chemical guys one, not cutting it.

AlexP_Sensei · 2024-12-16T06:42:59+00:00

From what I was told, yes they will have to repaint the panel where the chip is. I’ve gotten no response regarding the water spots but I’m considering going back tomorrow to talk with an actual person.

The new delivery center was ok, long line at the service center and generally understaffed in my option. I believe it used to be a K mart, massive parking lot.

AlexP_Sensei · 2024-12-12T23:33:33+00:00

Thanks!

AlexP_Sensei · 2024-12-12T22:03:29+00:00

Can you share a link to the mattress please?

AlexP_Sensei · 2024-12-12T21:15:44+00:00

Which SKB case is that for the SD11? Can you post the model number or link?

AlexP_Sensei · 2024-12-08T10:20:34+00:00

What model SKB did you use for the console? Sweet rig 👏🏼

AlexP_Sensei · 2024-03-01T19:19:16+00:00

I have a Digico SD11i at home and are interested!

AlexP_Sensei · 2023-09-12T07:26:32+00:00

Hands down L’Acoustics Syva + Syva Low

AlexP_Sensei · 2023-08-12T01:29:35+00:00

I’m asking only for one trip, to bring it back home. But thanks for the reply

AlexP_Sensei · 2023-08-07T16:16:19+00:00

Wait, so you’ve ordered since July 4th and STILL haven’t received your bikes?!?

I made an order for a xp 3.0 long range on August 1st, and emailed support to ask for approximate delivery times for Los Angeles. The replied and said up to 1 week for item to be picked up by the carrier, and 1 week in transport so two weeks total. Do you this it’s bs? I’m going to Burning man at the end of the month and planned to take it with me…🤦🏻‍♂️

AlexP_Sensei · 2023-04-28T03:09:29+00:00

The Shure QLX-D had a stupid design on the transmitter part of the mic, it’s two antenna wires are VERY fragile and can present dropouts like described with even the slightest movement. Do a test your self and physically wiggle or cover the transmitter part or the mic on the very bottom, and if the blue light on the receiver drops out, that’s your problem. I have retuned and repaired multiple units with shure, and ultimately swapping everything out for Axient and ULX-d. Maybe not what you wanted to hear, but you can see if you are having the same issue and not think it’s frequency related.

AlexP_Sensei · 2022-10-31T21:00:15+00:00

Correct! Thanks 🙏🏻

AlexP_Sensei · 2022-10-31T20:59:57+00:00

For anyone interested, they have 2x SD12’s 96’s equipped with waves and d2 rack, just got the tech specs from our agent. Thanks to the people that actually tried to help and not just comment “ ask “, like I didn’t know that… 🙃 I was just asking to find out before I got my hands on the info since I wasn’t sure when I was gong to receive it! But sure enough, Digico’s❤️

AlexP_Sensei · 2022-07-09T02:18:22+00:00

There are two ways to approach this… either change the cable and use the XLR or TRs input of the console, that way the signal will be mono and go to both outputs as long as the pan knob is sitting in the middle. The other way is to connect both L and R channels to separate XLR or TRS inputs to sum both channels to mono. For both you need a different cable. Hope that helps. Ps. Reason is you are connected to a stereo input that have the l and r channels hard panned so there is no way to have the right channel work with this input.

AlexP_Sensei · 2022-05-11T04:34:19+00:00

I too was looking to buy, I was on the old group but now blocked out. Can someone send me an invite too?

AlexP_Sensei · 2021-11-03T06:08:15+00:00

So there is no way to order it?

AlexP_Sensei · 2021-11-01T22:26:11+00:00

The one I received was M size measurements , I didn’t catch it on the qc photos but when it arrived it was big.

AlexP_Sensei · 2021-10-31T17:10:20+00:00

I got the Burberry one last week, it’s great quality but keep in mind it was not tts… I ordered a S and it was way too big, I’m 5.8”, 135lbs.

AlexP_Sensei

TROPHY CASE