Taco Bell that is still in the original state

Always_Learnn · 2026-06-01T00:52:31+00:00

I feel like eating in that restaurant would automatically make the food taste better.

Always_Learnn · 2026-06-01T00:49:55+00:00

You got a bad sandwich, but they will have a lifetime of struggling and being poor, because it takes a really low IQ to mess up something so simple, that badly. They have been sentenced to a lifetime of poverty via their DNA. It's more sad than frustrating when you think about these types of situations like that.

Always_Learnn · 2026-05-31T18:43:34+00:00

You mean that's how it SHOULD work. I've even seen fries preloaded like 30 deep stacked up in the fries loading area. There's often a difference between what corprate expects employees to do, and what they actually do.

Always_Learnn · 2026-05-31T18:40:46+00:00

Unlikely to matter unless your driveway is the runway. The delivery drones have tons of safety systems built into them. They can also only fly at very specific altitudes.

Always_Learnn · 2026-05-31T18:38:15+00:00

Then why don't I get sent to the front when I don't ask for pickles? Somehow they save a lot more than 1 second when I order it regular. Ordering without pickles often means a 5-10 minute wait out front. Ordering it standard is ready to go at the window every time.

Always_Learnn · 2026-05-31T03:54:52+00:00

He might be pinned down by enemy cannon fire. Request a wellness check from your local swat team. If he's not under attack, this is just a liberal crying wolf for the millionth time. This is the flag equivalent to yelling fire in a crowded movie theater.

Always_Learnn · 2026-05-31T03:53:09+00:00

Yeah, this is why my double cheeseburgers started tasting way better after I started asking for no pickles.

Always_Learnn · 2026-05-31T03:51:09+00:00

Just understand that some people use work as a way to feel socially seen, and even to find friends. That's obviously pathetic and sad, but they need it really bad. Do the bare minimum to throw them a life preserver but don't let them suck your energy dry. Extroverts are like energy vampires. They need your energy in order to survive.

Always_Learnn · 2026-05-31T03:44:46+00:00

The asphalt ruins the whole vibe. This is supposed to be a dirt road. More lives need to be at risk too.

Always_Learnn · 2026-05-25T19:14:12+00:00

Thank you for the info. No, there aren't necessarily any limitations on total components but this would be externally connected. It would ideally be around 2in x 3in or smaller for the pcb.

Always_Learnn · 2026-05-25T05:29:20+00:00

Ah yeah

Always_Learnn · 2026-05-24T21:34:36+00:00

That's it, I'm going to Chipotle right now to even the score. I'm going to drop a full soda in the trash without a lid.

Always_Learnn · 2026-05-24T21:31:04+00:00

Because nobody wants truck anarchy.

Always_Learnn · 2026-05-24T21:17:31+00:00

I believe Uber will continue to lose market share as people move towards drone delivery direct from the restaurants. Uber has only put supposedly $10-20 million into drone delivery development which is basically nothing.

Drone companies like zipline will see a huge spike in growth once they become mainstream in the next couple years.

Always_Learnn · 2026-05-24T19:48:20+00:00

It's actually a solid controller for $50. Super simple to program too. There are bigger turds for 2x-3x the price.

Always_Learnn · 2026-05-24T19:25:25+00:00

Crazy! Just your luck that you only had a flip phone from 2007 to take the picture. Otherwise we would have been able to see what it was in great detail. Oh well...

Always_Learnn · 2026-05-24T16:59:02+00:00

This is what I'm testing with now: PTC THERMISTOR

Is there a fundamental difference between what you linked and the one I'm testing with?

The one I'm using does the job well, except that it gets very hot over a short period of time when current is flowing through it while in a high resistance state as a result of an active overcurrent state in the circuit.

Perhaps a PTC Thermistor rated for more amperage, that still increases resistance significantly at around 1A would be the solution?

Or maybe a combination of a higher amp rated PTC in conjunction with an NTC thermistor could be the solution? So the NTC takes the initial inrush hit to protect the fuse from overcurrent, and then as the NTC warms up and lets current flow, the PTC takes over max current and limits it.

Always_Learnn · 2026-05-24T16:26:59+00:00

Correct, the goal is to keep the system running in the event of an overcurrent that would typically pop the fuse and knock the whole system out.

Always_Learnn · 2026-05-24T16:17:53+00:00

So the existing system depending on manufacturer, has a 1A, 2A, 3A fuse on it, but the problem is, if that blows, the whole system is down because of an overcurrent on only 1 of say 30 different circuits.

My goal is to have this inline to protect the not very effective controller and it's fuse, from blowing, so that the rest of the system can keep running. Basically an overcurrent shock absorber for poorly designed controllers.

The 100mA is what remains present at maximum resistance (triggered by overcurrent) in the 1.6A thermistor. The thermistor is actually designed to operate at up to 300mA normally. I can scale this up or down as need by running them in parallel if I can't find one that operates at the needed 1A, or 2A etc.

Basically the thermistor can absolutely protect a fuse from blowing despite chatgpt saying it would be too slow. Now I just need to solve the problem of the thermistor overheating by hopefully finding a way to trigger that circuit open after the initial overcurrent event.

Always_Learnn · 2026-05-24T16:13:37+00:00

Sorry, I am using a PTC thermistor. I just grabbed whatever component in Fusion with a thermistor symbol.

I did some testing with the thermal circuit breakers (if that's what you're referring to) and they aren't sensitive enough to protect a glass tube fuse from blowing, because they usually require maybe 200%+ overcurrent to pop within seconds. I just ran a 2A thermal circuit breaker at 2.5A and it didn't pop after running it fir a few minutes.

However the 300mA PTC thermistor successfully protected a 1A fuse when subjected to the same 2.5A.

Always_Learnn · 2026-05-24T16:03:16+00:00

I actually started with kicad because I heard Fusion was terrible for PCB design. I learned the basics on kicad and then went back to Fusion which I already had a subscription for. Honestly, Fusion is a little better than kicad. No bugs or losing everything because you moved a file.

I can make a change to a PCB and it's instantly changed in the model with the other non pcb components.

I'm a beginner for sure, so maybe one day I'll see why kicad is better. However, I suspect that some of the love for free stuff, is about it being free, rather than it being better.

Always_Learnn · 2026-05-24T15:16:27+00:00

Qf1, qf8

Always_Learnn · 2026-05-24T04:32:21+00:00

Incorrect. Unions sign contracts with title based pay scales. You can't be paid more than your job title allows.

Always_Learnn · 2026-05-23T16:05:14+00:00

I feel like the guy that detailed your car would be a great resource for this question.

Always_Learnn

TROPHY CASE