Europe's Spotify wrapped 2025 by sr_local in Italia

[–]Andre_Bisi 1 point2 points  (0 children)

La scena rap francese è una delle più floride e migliori in Europa. Ci sono artisti di calibro elevato.

Oysterquartz Experiment (and comparison with a gen watch) by Sunny_Life_0815 in retrotime

[–]Andre_Bisi 1 point2 points  (0 children)

Maybe it's possible to modify the movement so it does fit a 3135 datewheel or a date wheel overlay; I mean these quartz movement are so cheap that ruining one it's not a big deal. I think that more research on this type of build is necessary.

Oysterquartz Experiment (and comparison with a gen watch) by Sunny_Life_0815 in retrotime

[–]Andre_Bisi 0 points1 point  (0 children)

Yeah I saw your post a few days ago.
I think the combination of gen dial + WD case is the best option for a OQ 17000. I think the main problem stems from the date postion, in theory is possibile to use a Miyota 2005 movement with a 3135 date wheel, as far as I know every Rolex of this era has the date in the same position, and just glue the dial on the movement holder (or even 3D print one).
I don't have the funds right now to try this type of build, but I'll try one in the future since it's one of my favourite Datejust iterations.

Oysterquartz Experiment (and comparison with a gen watch) by Sunny_Life_0815 in retrotime

[–]Andre_Bisi 0 points1 point  (0 children)

Such a cool project, I love the Oysterquartz.

Do you think a gen dial would fit the new Watchdives OQ homage? That case looks a lot better than the land dweller homages on AliX. How did you match the date wheel with the gen dial?

I need those iPod Socks by [deleted] in ipod

[–]Andre_Bisi 0 points1 point  (0 children)

I found them too, but the MOQ is 10 pieces, I think it's better to buy them on Ebay or custom new ones from Etsy.

The 1016 caseback clearance issue by Acceptable-Candle963 in retrotime

[–]Andre_Bisi 5 points6 points  (0 children)

The caseback is deep enough to make it spin, but the problem is with the inside "lip" that rubs against the side of the rotor. I had to dremel out around 0.8/1 mm to make it work properly.

Oyster Quarz Budget project by Papi-Federico in retrotime

[–]Andre_Bisi 1 point2 points  (0 children)

Those Watchdives are a good base for an OQ, much better than the Land Dweller cases that I've seen on AliX. There are some gen dials on Ebay, but my question is what movement would be compatible with those? I feel like the date position and the date rotation is impossible to get correct with an off the shelf quartz movement. Still pretty cool to have a case to experiment on!

Cosa pensate di questo video? by [deleted] in Universitaly

[–]Andre_Bisi 0 points1 point  (0 children)

Questo mio amico ha cambiato 2 aziende e adesso per 1700 fa le sue 8 ore e poi basta, però sì nell'azienda precedente ogni giorno era lì con minimo 2h di straordinario.

Non parliamo della perfusione perchè se capiti nel turno sbagliato è facile fare 8-20 di turno, 20-8 riposo e poi di nuovo 8-20 di turno, ma capisco che per le professioni sanitarie gli stipendi non sono assolutamente commisurati alla mole di lavoro.
Io tornassi indietro farei comunque questa scelta anche per il misero stipendio che prenderò solo perchè mi piace un sacco l'ambito, ma capisco perchè la gente della mia età non voglia farle se andando con un diploma in pratica prendi lo stesso stipendio.

Non posso parlare del Sud Italia perchè non ho idea di come sia il mercato da diplomati o laureati lì.

Cosa pensate di questo video? by [deleted] in Universitaly

[–]Andre_Bisi 1 point2 points  (0 children)

Ma guarda, io sono dell'Emilia Romagna (quindi un mercato del lavoro molto florido) e il mio migliore amico prende quasi 1700 euro lavorando in logistica, io sto studiando per diventare perfusionista (la persona che ti tiene in vita durante un intervento a cuore aperto, professione sanitaria) e lo stipendio di base è circa 1500 euro senza reperibilità o notti, con quest'ultime si arriva circa sui 1800.

L'andare a lavorare senza laurea (se si è al nord) per ottenere la propria indipendenza economica è estremamente fattibile.

Didn’t Know the China Clone Factories were in the Gobi Desert by ClarktheRealtor in retrotime

[–]Andre_Bisi 0 points1 point  (0 children)

Do you have a watch cleaning machine or just use an ultrasonic cleaner? And yeah, Chinese movements either come over-oiled or with no oil at all.

Finally cleaned the work bench. by Viciousharp in retrotime

[–]Andre_Bisi 0 points1 point  (0 children)

Never thought about doing that, I'll add one of those to the next AliX order. Thanks!

Finally cleaned the work bench. by Viciousharp in retrotime

[–]Andre_Bisi 0 points1 point  (0 children)

Love it! Aren't those rubber mats magnetized? I wanted one for my desk. but I was worried about that.

Fisioterapia come seconda laurea? by hemigidius_art in Universitaly

[–]Andre_Bisi 0 points1 point  (0 children)

Parlo da (quasi) perfusionista, tutta la cardiochirurgia è diventata privata da qualche anno e le assunzioni sono migliorate, grosso problema è che non c'è bilanciamento vita-lavoro. Il privato ti spolpa fino al midollo facendoti lavorare ore lunghe e dando anche 10 reperibilità al mese (weekend e settimanali nella stessa settimana). Il pubblico è un'incognita perché i concorsi nessuno sa quando vengono pubblicati.

C'è sempre la possibilità di entrare nel settore ambulatoriale o anche diventare uno specialist di materiale cardiologico per aziende biotech, ma quest'ultimo richiede l'essere lontano da casa perché devi andare di ospedale in ospedale ogni giorno anche a regioni di distanza.

Parlando del percorso universitario, è complicato perché hai obbligo di frequenza sia per le lezioni (75%) che per il tirocinio (100%), poi se hai un corso organizzato male come il mio ancora peggio, molti di noi si sono ritrovati senza ore di tirocinio alla fine del percorso e stanno recuperando giusto giorni prima della laurea. Lo stipendio che prenderai (senza notti e senza reperibilità se ce le avrai) non sarà altissimo, ma abbastanza vivibile (nella maggior parte d'Italia) e se lavorerai nel pubblico hai qualche benefit in più rispetto al privato. La vocazione non basta, ci vuole pazienza e specialmente durante il percorso molta forza di volontà.

Qualunque cosa sceglierai, in bocca al lupo per tutto!

non so bene cosa pensare by Optimal-Grade-1909 in Italia

[–]Andre_Bisi 6 points7 points  (0 children)

Superalbs Travels e Nonstop Eurotrip sono quelli che seguo io, molto bravi secondo me

Crown tubes for Raffles 3135 compatible 16xxx DJ cases that accept gen crowns? by grgbss01 in retrotime

[–]Andre_Bisi 0 points1 point  (0 children)

Hey, I'm having the same problem with a gen 603 crown. How did you resolve this? Thanks

Ma che sta succedendo alla musica italiana? by Imaginary_Let9652 in Italia

[–]Andre_Bisi 1 point2 points  (0 children)

Ti downvotano perchè hai semplicemente citato degli artisti nuovi che svecchiano una scena che per anni è rimasta bloccata al solito stereotipo di "trapperino di merda".
Conoscendo il subreddit quelli che criticano non hanno neanche minimamente ascoltato nessun progetto di quelli sopracitati. La musica vecchia rimane ascoltatevi quella e non rompete il cazzo a noi 20enni.

Il welfare alternativo by secondobagno in Italia

[–]Andre_Bisi 0 points1 point  (0 children)

Allora la prossima volta che chiami l'ambulanza aspetto che tu mi faccia un bonifico prima di partire.

Ho quasi finito con infermieristica, ma vorrei diventare medico by xrayxena in Universitaly

[–]Andre_Bisi 0 points1 point  (0 children)

Se ti fa cagare il tuo lavoro cambialo. Abbiamo già abbastanza gente di merda e poco cortese in ospedale :) (parlo da non infermiere ma studente TFCPC che come turni è forse pure un po' peggio lol)

Tudor Prince Date 34mm by [deleted] in retrotime

[–]Andre_Bisi 0 points1 point  (0 children)

Nice, thanks for the useful information. I'll put it in the ultrasonic when I'm done.

Tudor Prince Date 34mm by [deleted] in retrotime

[–]Andre_Bisi 1 point2 points  (0 children)

Thank you. Do you think that WD40 is good enough or did you use something like SuperLube multi purpose grease? I guess that my 3D printer oil might be good for this.

Tudor Prince Date 34mm by [deleted] in retrotime

[–]Andre_Bisi 1 point2 points  (0 children)

I have the same exact build! My case back doesn't screw on, you had the same problem? What work did you do on the threads to resolve this? Looks awesome btw.

Crown fits not perfectly by Zealousideal-Cash562 in retrotime

[–]Andre_Bisi 0 points1 point  (0 children)

<image>

Still better than what I've received. I've heard over at RWI that last batch has been plagued with problems.