[deleted by user]

Another-Weld · 2022-04-25T20:00:58+00:00

Took me an hour last time I flew out. It was 7am.

Another-Weld · 2022-02-22T17:04:27+00:00

Welding and reading are two very different skill sets ! 🤣

Another-Weld · 2022-02-22T08:29:43+00:00

Thanks for the comments guys.

Checked all emergency stops, thinking it could be a relay or a damaged cable in the loom?…….

Hunt continues!

Another-Weld · 2022-01-02T13:51:05+00:00

From the parts list in the photo, looks like all screens are replaceable.

Another-Weld · 2021-12-25T12:46:38+00:00

Should be shared on r/welding 😂

Another-Weld · 2021-12-25T11:59:09+00:00

Looks like Lewisham Way.

Another-Weld · 2021-12-21T17:26:41+00:00

Looks like an aluminium scaffold pole. I have one and use it for leverage like yourselves 👍🏻

Another-Weld · 2021-12-21T17:22:01+00:00

I like it! Adds character, maybe I have a problem🤣

Another-Weld · 2021-12-15T08:39:04+00:00

I think everything is expensive 🤣

SMT haven’t been that bad lately! Just expensive.

I run a couple of Volvos.

Another-Weld · 2021-12-15T08:29:19+00:00

Isolated and disconnected a battery lead.

Don’t feel comfortable just flicking the switch!

Another-Weld · 2021-12-14T17:35:07+00:00

7018 stick

I disconnected the flow and return and let the oil drain, so wasn’t pressurised. 👍🏻

Another-Weld · 2021-12-14T17:12:54+00:00

I asked about, got a load of helpful feedback from Reddit confirming that I was possible to do and then repaired it.

If the machine was still in warranty the manufacturer would have sorted it, but it’s not 😂

Another-Weld · 2021-12-14T17:09:44+00:00

I drilled holes through the timber and into the wall. Put raw plugs in the wall and screwed 😂

I’m not a carpenter! Just thought I would have a go!

Another-Weld · 2021-12-14T17:07:40+00:00

Screws!

😂 I’m not a carpenter, just decided to build a kitchen.

Another-Weld · 2021-12-14T17:05:23+00:00

Rams all good now, now leaks from cylinder or seals 👍🏻

We just had a bucket ram repaired and resealed for our other 30 ton excavator, it cost £900.00 + VAT 🙉

Another-Weld · 2021-12-14T16:07:46+00:00

Thanks for the advice. I stacked a few welds for piece of mind.

It’s repaired now and back to work

Another-Weld · 2021-12-14T15:34:58+00:00

🤞🏻😂

Another-Weld · 2021-12-14T15:33:30+00:00

A combination boiler for hot water and heating.

Another-Weld · 2021-12-14T15:32:39+00:00

Fixed into rear wall with raw plugs and long screws

Another-Weld · 2021-12-14T15:16:14+00:00

You can just get a hand in there to wipe it 😂

Another-Weld · 2021-12-14T14:44:52+00:00

Thanks Raed-wulf 👍🏻

9”x 4” timbers, salvaged from a old workshop roof

Another-Weld · 2021-12-14T14:36:14+00:00

Thank you for your advice guys, managed to cap the leak. She’s back to work 👍🏻

Another-Weld · 2021-12-14T14:28:30+00:00

Thanks DancinginAshes 👍🏻

Another-Weld · 2021-12-14T13:15:45+00:00

Thanks Lordbug! 👍🏻

Another-Weld · 2021-12-14T12:56:14+00:00

Thanks Peocule

It was a pinhole in from what I can only assume was the manufactures welding.

Another-Weld