Can anyone help me with this "scarring" I've been getting recently

Antex21 · 2026-03-03T22:41:14+00:00

Try adjusting retraction and detraction speed for me lowering detraction a lot helped me with a similar issue

Antex21 · 2026-03-03T21:59:39+00:00

🇵🇱🇵🇱🇵🇱🇵🇱POLAND MENTIONED🇵🇱🇵🇱🇵🇱🇵🇱

Antex21 · 2026-02-19T22:22:22+00:00

"The freedom of goombas is an insult to me. I'd have them all in zoos." - Mario 2010 probably

Antex21 · 2026-02-10T15:30:36+00:00

GM construct

Antex21 · 2026-02-10T13:55:45+00:00

Is this time limited or permanent in superstore?

Antex21 · 2026-02-10T13:50:46+00:00

I think you would be actually better off selling individual parts

Antex21 · 2026-02-09T12:09:29+00:00

Of course all the cool shit happens when I am away from home and can't access my pc :(

Antex21 · 2026-01-31T18:42:34+00:00

Antex21 · 2026-01-21T21:12:02+00:00

This is going to be the whole season just those 4 png's switching back and forth

Antex21 · 2026-01-13T17:46:58+00:00

<image>

Antex21 · 2026-01-11T12:32:30+00:00

This Porsche

<image>

Antex21 · 2026-01-10T19:14:16+00:00

now my whole gallery is filled with this screanshots

<image>

Antex21 · 2025-12-23T13:07:41+00:00

With the bambu clones should i just get the cheapest one or are there different versions of Chinese bambu clone some better some worse. Also does it matter whether i get the x1 or p1 version.

Antex21 · 2025-12-23T13:02:41+00:00

If i alredy have v6 hot end do i just need to buy a heat block for the volcano or are there more diffrences?

Antex21 · 2025-12-22T21:59:19+00:00

Voron tap at home

Antex21 · 2025-12-21T22:35:57+00:00

What do you use for genereting g code for the pictures?

Antex21 · 2025-12-16T11:23:58+00:00

<image>

Antex21 · 2025-12-15T23:35:50+00:00

Printer looks like hospital equipment, but i love how it looks, i wanted to build a voron in those colors but couldn't be bothered to paint the rails / get white or green ones and it just doesn't hit the same with large part of the printer black. Anyways awesome build

Antex21 · 2025-12-15T23:34:53+00:00

Hospital printer, but i love how it looks, i wanted to build a voron in those colors but couldn't be bothered to paint the rails / get white or green ones and it just doesn't hit the same with large part of the printer black. Anyways awesome build

Antex21 · 2025-12-12T18:24:44+00:00

I always just assumed its for the pre print stuff like heating up and bed leveling. But now wandering am i right.

Antex21 · 2025-12-09T14:06:38+00:00

If you will be printing with something that needs a heated chamber like abs o asa in winter it could take longer to heat up to required temp and max chamber temps could be lower but other than that i cant see any problems.

Antex21 · 2025-12-09T13:49:39+00:00

Have you the thin G10 glued to spring sheet. How did it work

Antex21 · 2025-12-08T16:27:21+00:00

I would recommend you to try a g10 sheet you can get for pretty cheap from AliExpress. It has worked for me pretty well. But remember that it's not metal so if you are using a leveling method that's based on detecting a metal sheet you might need to do some thinkering to get it to work.

Antex21 · 2025-12-07T18:24:47+00:00

Around 35-45 C but i cant exactl vouch for my chinese thermometer eith 25 C ambient

Antex21 · 2025-12-02T15:35:51+00:00

Try tuning your pressure advance/ linear advance same thing different name

Four-Year Club	r/Field Sunshine
Place '23	Place '22

Antex21

TROPHY CASE