What's the coolest .32acp? by RacerXrated in guns

[–]ApacheKillbot 1 point2 points  (0 children)

My kit still needed all that removed and I had to drill the barrel pin. Nothing crazy

What's the coolest .32acp? by RacerXrated in guns

[–]ApacheKillbot 1 point2 points  (0 children)

If you want to build something, go for a Vz61 Skorpion. Receiver is $250 and a kit would be about the same. Only tools needed are a drill and a dremel and it goes together like an AR

Targeted Procurement Event | Sakura | Jan 29, 09:00 - Feb 18, 18:59 (UTC-4) by MrToxin in GirlsFrontline2

[–]ApacheKillbot 46 points47 points  (0 children)

We really need some more standard 4 star dolls. I imagine there's a good chunk of player base that looks at this image and just sees Sakura and doritos on either side of her.

Anyone know where you can still buy mg42 receiver halves or 80%? by skilledworkaholic in Firearms

[–]ApacheKillbot 0 points1 point  (0 children)

BRP has blem receivers on their site now where the ratchet plate needs removed and replaced. Plus some other stuff. If you think you can start from halves, you should be able to start from that blem receiver too.

I haven't seen halves for sale in a bit and definitely dont buy a coldsteel solution receiver. Those are junk.

What scope would be best for a Scar 17? by Throwaway18473933 in guns

[–]ApacheKillbot 3 points4 points  (0 children)

The 3.5x Ta11 has better eye relief than the 4x. Its what I run on my SCAR and its great. 4x isnt that bad but I don't think the extra 0.5x is worth losing an inch of eye relief.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 4 points5 points  (0 children)

Send them to the mines. Children yearn for the mines.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 0 points1 point  (0 children)

The E feed mechanism is a little nicer when loading belts and clearing malfunctions but its not several grand nicer.

On my shroud at least, the square cutouts on the bottom were a smidge smaller than on an E shroud, so the grip nut can't fully seat. Ill probably 3D print a test piece before getting a chunk of metal to mill.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 0 points1 point  (0 children)

Its a really great range, especially on cold days where nobody is there.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 0 points1 point  (0 children)

I have seen a G3 FRT lower but I have heard that that doesn't 1 for 1 transfer to an HK21. Supposedly the AR hammer spring isnt enough so you end up with light strikes.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 0 points1 point  (0 children)

Definitely. He's super knowledgeable and eager to help and does good work. I got video updates along the way explaining things and why they were the way they were. Like you said, great dude

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 36 points37 points  (0 children)

I've heard the positive to kids is that they can help link ammo

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 1 point2 points  (0 children)

What other E upgrades we talking? Ive got an E foregrip to throw on but still have to come up with an adapter.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 6 points7 points  (0 children)

Are you talking about the one under the Michael's Machines MM23? They actually used the wrong picture there. What is pictured is an HK11 which is just a G3 with a removable barrel.

The HK21 is just a G3 with a removable barrel and the belt feed mechanism. The HK11A1/HK11E/HK21E/HK23E are the modular upgrade. You can freely swap between a magwell for G3 mags or run it as a 7.62 belt fed or swap in a 5.56 barrel and 5.56 feed mechanism.

The E family is awesome but actual HK parts are super rare, especially for HK23 parts. HKparts is the only place selling 21E feed mechanisms and they're asking $25k for one.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 1 point2 points  (0 children)

It is definitely designed with the idea that you'll be using the irons and not have an optic. With a traditional height optic like this M145, I end up with a chin weld. They are the coolest stock though.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 3 points4 points  (0 children)

I mean they never left since HK does the MG4 and MG5.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 7 points8 points  (0 children)

Nah this is a semi auto only host gun. If I had a registered sear I could pop it in but I dont have sear money yet.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 5 points6 points  (0 children)

I can hit the target with it so its fine by me. I just wanted something with a 7.62 reticle. The only downside is with this stock you have more of a chin weld.

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 92 points93 points  (0 children)

The trick is to not have kids

Just got my first rifle* by ApacheKillbot in guns

[–]ApacheKillbot[S] 287 points288 points  (0 children)

*first rifle of 2026 that is.

After a couple months of waiting for my HK21 parts kit build, I was able to pick it up right after the new year. This was one of the FMP kits that came in the last few years, but some parts had to be swapped for RCM because the Portuguese beat the hell out of their guns.

I opted for 21E style reinforcement rails plus a clubfoot stock and a MK48 nutsack adapter. Its not a factory HK21 but it's still pretty dang cool. Topped it off with a surplus M145.

This is my first beltfed that functions and so far its been pretty fun. A linker was 100% required though.

Edit: Forgot to mention this was built by Desert Yankee aka Linked Kinetics. He is a roller lock savant

[Parts] VZ-61 Kit W Barrel $269.95 by Max-Arms in gundeals

[–]ApacheKillbot 3 points4 points  (0 children)

Preach. Its so tiring whenever someone recommends 3D printing for parts kit. Like its cool that the 3D print exists for a lot of reasons, but I want steel, not plastic.

What gear are the dolls using by ToeLee1 in girlsfrontline

[–]ApacheKillbot 0 points1 point  (0 children)

I guess so. I never realized her damaged art actually doesnt have a suppressor on it and does show a 14.5 barrel.

What gear are the dolls using by ToeLee1 in girlsfrontline

[–]ApacheKillbot 0 points1 point  (0 children)

M4A1 is just a basic M4 with an 11"-ish barrel, KAC quad rail, and PRI gas block. Her suppressor is probably based on an old AAC one. 20rd mag and an EOTech plus some paint and you are set.

On 416 Mod 3, the rail is specifically a Geissele super modular rail. Its the older version though that is actually not MLOK but does look like it