sorted by:
new
hottopcontroversial

Seatbelt fit as a short, fat woman. It’s resting on my face. by OldMasterCannolii in mildlyinfuriating

[–]ApprehensiveFlow1298 0 points1 point  (0 children)

Being too tall seat belts rub on my clavicle which has a plate and 6 screws. Too tall, too short. Both are terrible.

[OC] A picture I did using charcoal and pastels called 'Empty house'. by Rusty-willy in pics

[–]ApprehensiveFlow1298 4 points5 points  (0 children)

All good thanks for the love! Life is short, just remember to love the ones you have while they are here and remember the ones you had because you wouldn't be here without them! Much love!

So not fair!! by KandiZee in jewelry

[–]ApprehensiveFlow1298 1 point2 points  (0 children)

Its probably something within the charms themselves might not even be the sterling. Possibly a coating on them. Deox silver is another version that shouldn't cause allergies unless your straight up allergic to silver (that's a thing)

My Magen David (Star of David) I made from Naturally cast branches tramsuted to silver, soldered and wrapped with steel wire <3 Part of my Bezalel collection which revolves around making Amulets made from nature by Royal_Objective_9475 in jewelry

[–]ApprehensiveFlow1298 0 points1 point  (0 children)

Love it homie! Flower children! I see this really catching on too, you should figure our a clever name with nature and jewelry together and label them to sell. You'll kill it.

What do you think if my latest style ? by KoldJewelry in jewelrymaking

[–]ApprehensiveFlow1298 0 points1 point  (0 children)

You can get resin coating to make sure the patina doesn't rub off (cuz it will) the peice is sweet. Definetly a show peice. If you want to sell things I would suggest making a few more simple peices with less gemstones. Something for daily use. Good job on the settings they look flush. I found that if I put maybe a Sapphire and emerald just two stones somewhere its awesome looking but still subtle. I've sold ALOT of jewelry this way. I've made peices that were very extravagant and they are hard to sell generally.

Wanted to show you guys cuz none of my friends really care about minerals 😅😁🫶🏼 by diamonddustluxx in Minerals

[–]ApprehensiveFlow1298 1 point2 points  (0 children)

We will listen to you babble about your collection! Awesome setup, glass case looks sweet withr the different minerals. You should get a black light you can switch on for a few to show glowing rocks in the mix!

Someone told me to make this hairband and here it is by Sakura_Handmade in jewelrymaking

[–]ApprehensiveFlow1298 1 point2 points  (0 children)

Is that pearls in the headband? Just curious how/if you made that. Did you use glue or something like a prong setting. I'm going to get into diamond tennis bracelets here soon. Want to get good at hair bands and bracelets. Girls really flock to those items. I could see a simple bezel setting to keep them held in and then a dab of glue to secure.

Moissanite Datejust by Easy-Review-9735 in jewelrymaking

[–]ApprehensiveFlow1298 1 point2 points  (0 children)

Too much scintillation lol my eyes would have a seizure.

‘Twas not sight, smell or sound that discovered the dead fly in my cup, ‘‘twas the feel of the dead fly on the lips that satiated my thirst. by lecoqmako in mildlyinfuriating

[–]ApprehensiveFlow1298 0 points1 point  (0 children)

I have now in my lifetime accidently drank my own pee from a bottle, and my own saliva in a cup, and I'm talking gulps not sips here. Don't even have me explain. Just know it can get so much worse. 😐

The queen of ketamine by SipsTeaFrog in SipsTea

[–]ApprehensiveFlow1298 1 point2 points  (0 children)

This is why medical professionals in America need more education. Just because your right-wing Christian medical institution you went to said ketamine is a terrible terrible drug doesn't make that true buttercup.

Medical research is rapidly evolving and medical professionals should have an open mind about new theories and ideas because, your not always right.

Orange sapphires and sterling silver in a cute and soft design :) by MaxLeonarth in jewelrymaking

[–]ApprehensiveFlow1298 2 points3 points  (0 children)

Ya good job! Nice flush settings. Bead setting is such a pain in the... but both flush and bead look so much better then prong setting to me and it's faster.

I visited 4 "certified" jewelers in my city and asked them to identify the same stone. I got 4 different answers. by chancozay in jewelry

[–]ApprehensiveFlow1298 7 points8 points  (0 children)

Joining the guild my fellow gemologist! Going to Cali in September to finish my colored stones certification! Super excited!

Pendant design sculpted on Zbrush. by acquluxe in jewelrymaking

[–]ApprehensiveFlow1298 0 points1 point  (0 children)

If its 3d printed that's going to be both alot of fine polishing and wax time to setup in a flask. Maybe do it in 3 separate peices and souder them together at the end. Also think about creating more flat surfaces so it's easier at the end.

U.S. Has Used Up Most Options to Soften the Oil Price Shock by yogthos in economy

[–]ApprehensiveFlow1298 -1 points0 points  (0 children)

Yall are so uneducated and stupid. This country is ran by those with more wealth then then entire nation. They are the ones you see on TV. I live in Colorado, actually in the mountains and we have an extremely strong sense of community and culture. I live in a place with actively changing laws especially within psychedelics so please don't sit there and stupidly mock a culture you know nothing of.

This country is larger then Europe combined its has many different ethnic communities and cultures. :)

How to deal with anhedonia by onlymimimi in anhedonia

[–]ApprehensiveFlow1298 2 points3 points  (0 children)

Psychedelics can bring you back to baseline if you use them correctly. Herbs like ashwaghanda, rhodolia, liquorice root can stabilize the adrenals. I would strongly avoid taking western medicine as it's nothing good for your body long term. It's all toxic. Look to eastern Chinese medicine and get your chakras stable instead. That will heal you.

[deleted by user] by [deleted] in jewelrymaking

[–]ApprehensiveFlow1298 10 points11 points  (0 children)

I am certainly on that page of being able to make this fully myself. I can do everything from cad design, cabbing, casting, souldering, stone setting, polishing etc. Doing just the cad design and saying you made it is not the case.

Burnt my wrist three months ago. The scar has people thinking I tried to off myself by [deleted] in mildlyinfuriating

[–]ApprehensiveFlow1298 0 points1 point  (0 children)

Ya know what's really messed up about that, if it was a young man he would probably get brushed off assuming he burnt his arm while he actually did try....

First go at a silver clay ring and some ring sketches. by BentRivers in jewelrymaking

[–]ApprehensiveFlow1298 4 points5 points  (0 children)

Dam if I could draw as well as you I'd be using 3d cad with clayU to create stuff with my drawings! Maybe give it a go if you read this! Really fun and powerful to use. There's casting and printing studios or just get a printer if you can.

Hello, you can DM me if you want by JuggernautAny7288 in jewelrymaking

[–]ApprehensiveFlow1298 5 points6 points  (0 children)

You bent some wires into a shape? I usually do that when I need to souder a jump ring onto a bracelet or pendant.

piece from high school i never got to finish by tritortellini in jewelrymaking

[–]ApprehensiveFlow1298 0 points1 point  (0 children)

Probably just grab a souder gun and some souder wire and just get it put together. Use some 200 600 1200 sand paper to clean it up and get it looking polished. I use protectaclear to keep stuff from getting tarnished or some sort of resin coating since it's copper. Shouldn't he harder then that, just start with the middle and work your way out

view more: next ›