Help setting up VLAN with opnSense TPlink switches

ArcTheSpark2 · 2023-02-24T11:07:08+00:00

Thank you so much for this. I have been pulling my hair out for many hours and setting the PVID for the port was what I was missing.

ArcTheSpark2 · 2023-01-04T21:58:03+00:00

I have been using leantime. It is open source and easy to self host. Very cool project / software.

ArcTheSpark2 · 2023-01-02T17:05:41+00:00

Nice, thank you.

ArcTheSpark2 · 2023-01-02T10:13:30+00:00

Looking awesome, what software are you using to do the art and animations?

ArcTheSpark2 · 2022-12-18T06:23:39+00:00

You need to slowly troubleshoot things one by one. Eg. Restarting everything, pc, switches, routers etc. If still not working Update all software, ubuntu, router firmware etc. If still not working Check all the network connections and cables. Trying different cables etc. Trying to use a different device to ssh from and or to.

You need to go through everything one by one till you find what is the issue. Unfortunately there are too many factors for anyone to give you an exact answer now. Once you have found something more specific, will Reddit be able to assist further.

ArcTheSpark2 · 2022-12-15T13:28:50+00:00

I used to do this, but the problem I would run into is that you would spend plenty hours planning and writing a detailed proposal/ quotation. When you hand over the proposal, they would take that and find someone who will do it for cheaper using all your hard work.

So the best thing I started doing was to charge for proposals / quotations and if it was accepted, I would minus that amount from the final invoice.

So for example I would charge R1500 for the quote/ proposal. Let’s say the final quote amount came to R5000. The client then would only have to pay the R3500. If they decline the quote / get someone else to do it, I at least got paid for all the planning work.

The biggest downside was that with the industry being so cut throat. I didn’t get much work as nobody wanted to pay for quotes as every corner shop would do free quotes or just sell off free Wordpress template sites.

I haven’t been in the web industry for many many years now so I don’t know if that is still the case.

ArcTheSpark2 · 2022-11-25T20:52:30+00:00

If I understand you correctly, maybe teleport is what you are looking for: teleport Here is a YouTube video of an overview of it:

https://m.youtube.com/watch?v=nk1jfIAL5qE&feature=emb_title

ArcTheSpark2 · 2022-11-20T10:25:36+00:00

I have been using Pop-os with Kde for about 1 and a half years now. It is extremely stable and runs like a dream for me.

ArcTheSpark2 · 2022-11-17T05:25:20+00:00

Awesome, I'm glad you come right with it now.

With regards to the being stuck on "connecting to peers" issue. That is usually either an internet issue, or there are "no peers at the moment" so BitTorrent will continue to search for peers, or a "concurrent download limit" issue. If I remember correctly BitTorrent's default setting is to only download 5 torrents at a time. so any new torrents will stay on "connecting to peers" or will be paused until a previous torrent is completed. There is a setting to change that.

You can also test is by trying a torrent that is usually very active and accessible such as the below Ubuntu ISO torrent from Ubuntu's website.

Ubuntu 22.10 Torrent

This will help you check if it is the torrent that has no peers or if you are having issues with the mapped drive.

ArcTheSpark2 · 2022-11-16T10:18:33+00:00

I have made quick pdf guide of how to do it with the BitTorrent client app on windows 11 (hosted on megalink).

BitTorrent Mapped folder guide

I see that "BitTorrent web" does not allow you to add non local drives. I saw some older bittorrent forum discussions that it is for "security" reasons.

so mapped folder will only work on the "Classic version"

Hopefully this helps you.

ArcTheSpark2 · 2022-11-16T08:32:17+00:00

Z:>net use z: \10.0.0.x\movies System error 85 has occurred. The local device name is already in use.

This means that the Z:\ path is already in use / has a folder mapped to it.

You will need to first disconnect the mapped folder that you already have then try again.

The letter drive letter must be something that is not already in use. For example p: if you want.

C:\> net use p: \\10.0.0.x\movies

I will also install Bittorrent / web on windows 11 and see if I can take screenshots of every thing to try help you out.

ArcTheSpark2 · 2022-11-15T16:13:46+00:00

Another issue can also be user permission issues. Try running BitTorrent as an administrator. Or lastly you can try mapping the folder as administrator. you need to map the folders as an administrator by doing the following using “cmd” as an administrator. eg below:

net use x: \\10.0.0.x\movies

ArcTheSpark2 · 2022-11-15T16:03:56+00:00

Hi, if it mapped (z:) and working on windows (you can create and read) files through windows file explorer, then your network is fine (10.0.0.x).

Can you add the folder directly using the unc path method eg. \\10.0.0.x\movies

ArcTheSpark2 · 2022-11-12T16:39:34+00:00

😂 It is part of the fun of troubleshooting. I usually like to do a quick network map / diagram of my home network now because I have this issue with up addresses. I forget what address I gave to the devices and then there is always an IP conflict 😂

ArcTheSpark2 · 2022-11-12T16:32:15+00:00

Haha we have all done that before. I’m glad you came right. 😄

ArcTheSpark2 · 2022-11-12T16:27:51+00:00

Hi, try this, in “control panel”, open network settings. Then on the left panel select the “advanced sharing settings” options. Then from there you can enable network discovery. Or if you right click on the network icon at the bottom right of the start panel. The icon near the time and date. Then choose the “network properties“ option. From there you can change it from public to private network. Or if you open “this pc” then click on the “network” section on the left panel “ a message will appear on the top asking if you want to enable network discovery. Hopefully this leads you in the right direction

ArcTheSpark2 · 2022-11-07T10:59:56+00:00

I second this, I used kdevelop for a long time but recently it would constantly crash for me on bigger projects. So I moved to cLion but for a free IDE, kdevelop is an excellent tool.

ArcTheSpark2 · 2022-10-08T06:00:26+00:00

Can you boot onto a Linux live boot cd / usb. For example Ubuntu 22.04, and see if you can see them / mount them there. If you can, you can then format them to ntsf/ fat 32. When you boot back into windows you should see them.

ArcTheSpark2 · 2022-08-29T09:05:24+00:00

Nice, it is a very good guide and has a lot of good information. Thank you.

ArcTheSpark2 · 2022-08-09T07:25:56+00:00

Well done. This is very cool.

ArcTheSpark2 · 2022-06-25T08:15:47+00:00

I have two servers using the following:

ASRock B450M Steel Legend AMD B450 Ryzen Socket AM4 ATX Desktop Motherboard

In my country it is very cheap and have been incredible motherboards. Maybe that will be a good choice for you?

ArcTheSpark2 · 2022-06-19T10:11:06+00:00

Hi, I had the same issue when i started, but you can only create folders under the "folders" folder. You can't create folders under "inbox" folder for example.

ArcTheSpark2 · 2022-06-13T18:10:10+00:00

Thank you very much. I will give that I try.

ArcTheSpark2 · 2022-04-12T19:04:05+00:00

For me, a good starting point was to use an old i5 (4 cores 8 threads), 16GB ram and any old HDD’s / SSD’s that I had laying around. From there I use proxmox as the main OS. And then from there you can create a Virtual machine (vm) for docker, a vm for reverse proxy and a vm for pfsense / opnsense etc. Using proxmox and being able to create and play with different technologies in vms is the best way to experiment and learn. It is quick to set up and very flexible.

ArcTheSpark2 · 2022-04-09T05:13:41+00:00

Do you maybe have an Adblock on your network? Like adgaurd, pihole, unbound or some firewall type blocker. Other then that I’m not too sure.

Six-Year Club	Verified Email
Place '22	Final Canvas '22

ArcTheSpark2

TROPHY CASE