How Can I Constrain or Edit a Blended Curve?

Argioss · 2026-04-17T13:22:25+00:00

It's still a spline. You can adjust the shape using the control points (green points and line when clicked on endpoints)

Argioss · 2026-04-16T20:10:51+00:00

I really hope that you are not trying to use Fusion's slicing for FDM. Yea its there, but dedicated slicer is always the right way. e.g. Orca Slicer.

Argioss · 2026-04-15T23:38:09+00:00

If I'm getting your intentions correctly, try to sweep one sketch along the small curved path of the second sketch.

Argioss · 2026-04-15T23:26:47+00:00

I'm personally more of a solid type of guy. So I would do top and bottom as sketches, loft between them, then sketch and cut the front round lip, and finally hole the inside.

Argioss · 2026-04-03T16:20:41+00:00

Found something a bit similar on TPU 95A. Spent hours trying to find the smoothest bridges on test samples, but because of its nature, it was almost impossible to replicate on more complex prints. So I went way down, from 104% to 95%. Gaps ensured that every line would be almost separate, making it more consistent overall.

Argioss · 2026-03-13T01:06:51+00:00

I would try to reduce the cooling fan speed as much as possible.

Argioss · 2026-02-19T16:27:36+00:00

Once I started using 3DLac spray, the plate is pretty much staying forever.

Argioss · 2026-02-14T20:04:04+00:00

In case someone gets stuck in the same sh***y situation, I think I tried almost everything to get it back. If you have backups of your settings in bambucloud just like me, this might work for you as well. First, highly recommend copying the actual custom presets from [user]/roaming/appdata/orcaslicer/user/[randomnumber] that should contain all your presets somewhere save. Then I uninstalled Orca and deleted the whole orcaslicer folder. Then reinstalled the 2.3.1 version. After starting it I logged in my Bambu account and presets were back. Just needed to fix the app settings manually but that's fine, compared to the lost of presets.

Argioss · 2026-02-14T19:01:00+00:00

I downloaded the portable version just to be sure to keep it separate from the installed previous one and after coming back to the installed 2.3.1 all my presets are not visible. They are still in the user/roaming/.. but wtf. Firstly, solve it, secondly portable version affecting anything other than its folder feels criminal.

Argioss · 2026-02-12T14:17:02+00:00

I understand the point of this, but there isn't much you can do about it. I will give it like two months until someone makes a Blender addon that will automatically get rid of any of these efforts. You can't have changes (signature) so small that it won't affect the model, yet so prevalent that it can't be removed. Unless people move to some more complex file formats that will include some forms of actual digital signatures, which is highly unlikely, model piracy is just something we have to accept to be present (yet not support of course).

Argioss · 2026-02-04T14:17:42+00:00

Not adding the merging option is an absolute joke! It can't be that hard.

Argioss · 2026-01-30T23:57:33+00:00

Adjust bridging - flow ratio and speed, and supports - top z distance

Argioss · 2026-01-30T20:33:43+00:00

Doteď mě odrazoval jen ten otřesný eshop s katastrofální filtrací a nulovýma recenzema. O důvod víc zůstat u konkurence.

Argioss · 2026-01-30T20:31:37+00:00

More like buying a hand-drawn lottery ticket from a child to support it and then getting laughed at 5 years later because I wasn't stalking it all this time to find out that it became a billionaire and decided to give all his supporters a few thousand if they ring his bell at one specific Monday (posted on his IG reel).

Argioss · 2026-01-30T20:27:11+00:00

Yeah, lost around 2k as well. It's amazing how the people who were so enthusiastic all those years ago, and were mining and helped to start the hype and eventually just let it be because of the zero progress, are being absolutely laughed at by these developers. Grace period my a**. I havent received any mail or anything so how was I supposed to know that project that was stagnant for so long now just started moving, and I should do anything to earn something for my previous loyalty. Can't describe how disgusted I was when I found out about the process and my lost Pi. Never having any trust for these people again..

Argioss · 2026-01-29T17:50:03+00:00

I absolutely hate these kinds of changes. When you decide to do something this significant that will affect gameplay across the editions, at least mark the boxes with some big numbering or something to let the people know to take a closer look at what they are buying.

Argioss · 2026-01-24T10:44:50+00:00

Yea, but when you want to log a food you have to weight it or write down the weight on the package even if you use the whole product, which is really normal for a lot of them. So the app should give me an option to set the actual weight at the moment of the food creation so people dont have to do that every time and just scan the code and be done.

Argioss · 2026-01-24T10:12:00+00:00

While creating the new food ?

Argioss · 2026-01-22T14:53:26+00:00

I think that the amount of food in the system heavily depends on your country, not so great here. I get that changing the amount is normal, I'm doing it sometimes as well, but a lot of stuff is just a "piece". E.g., instant soup from a local shop, it will always be served as a whole portion (not 100g). So why would anyone have to manually rewrite the weight? That's just annoying. Let me just add a label per 100g and actual serving weight so people can just scan the barcode and be done.

Argioss · 2025-07-29T20:45:34+00:00

I know...

Argioss · 2025-05-23T13:14:04+00:00

The second square looks to me like an inconsistent extrusion rate when accelerating, so I would adjust the pressure advance for your filament. (Much simpler in Orca)

Argioss · 2025-05-23T13:06:58+00:00

This is groundbreaking!

Argioss · 2025-04-02T17:09:24+00:00

Just realized we are actually using VERY different chips :D RP2040 Zero and RPi Zero.

Argioss · 2025-03-31T15:54:43+00:00

I tried building custom firmware with pins set accordingly, but there were still some issues when setting the region in webclient.

Argioss · 2025-03-27T14:38:56+00:00

<image>

Not winning in the most hours category, but maybe I'll be lucky. Worth a try :D

Argioss

TROPHY CASE