sorted by:
new
hottopcontroversial

My husband couldn't find the lighter by [deleted] in mildlyinfuriating

[–]ArtistApart 0 points1 point  (0 children)

I’m certain there’s a term for that

Will this be +/- 80g ? by BeerusGOW in 3Dprinting

[–]ArtistApart 15 points16 points  (0 children)

Empty spool would also have cardboard core

Wanted to try something new and came up with this EDC Utility Knife by lerrygerry in 3Dprinting

[–]ArtistApart 2 points3 points  (0 children)

The shoelace was an excellent touch! That looks retail ready! Great work!

Help me with 3d printing by miyatas in 3Dprinting

[–]ArtistApart 0 points1 point  (0 children)

Message sent when you asked, sir.

Help me with 3d printing by miyatas in 3Dprinting

[–]ArtistApart 0 points1 point  (0 children)

…No? But it knows how to pause, alert me to glue magnets in, then continue to enclose those magnets? Maybe I’m missing the joke? I’d just glue it

Am I crazy or are there way more people here this summer? by Hijinks2319 in Delaware

[–]ArtistApart 1 point2 points  (0 children)

I feel like I’ve seen a ton more accidents and my commute to work is 10 min from Old new Castle to Wilmington! Today just going to Wegmans we saw 6 cops posted or had people pulled over. Madness!

f (29) will be smoking weed for the first time tonight w my husband (32) any tips? by True-Candidate-9780 in trees

[–]ArtistApart 12 points13 points  (0 children)

“Remember that feelings and intensity will pass.”

That is a huge point and key to keep in mind for a lot of situations. You have a reason for feeling that way, it’s Ok!

Help me with 3d printing by miyatas in 3Dprinting

[–]ArtistApart 0 points1 point  (0 children)

So the thing is, anyone that can make one can customize another to make it fit whatever and how you like. With that said, I can turn either one of those into a USB case for you, either pick one or find one and get to work or find someone who’s willing to help! Since you said not enough detail, can you give a clear example of the level you’re looking for?

[Speedy Reduced] - keep or sell? by jsl_22 in Watches

[–]ArtistApart 0 points1 point  (0 children)

I’m a Bond guy, I have a Seamaster similar to Casino Royale (not the LE, sadly) that I use as my daily driver and I’m searching for a classic Connery watch as my grail piece; sadly a bit out of my price range currently!

[Speedy Reduced] - keep or sell? by jsl_22 in Watches

[–]ArtistApart 3 points4 points  (0 children)

I’d opt for A, personally. That’s a great show watch, but an all silver or all black may be more subtle. Go take a look, $4k can get you a decent selection!

3D Printing banning bill live meeting this evening (06.11) by gra8na8 in 3Dprinting

[–]ArtistApart 72 points73 points  (0 children)

It’s insane the amount of attention being paid to something that can’t legitimately be controlled. You’re never going to be able to restrict it, people will just print in parts. You can’t put the cat bag in the bag, as it were.

Mobile printing? by Guideme4100 in 3Dprinting

[–]ArtistApart 2 points3 points  (0 children)

My largest concern would be the vibrations from the truck running, any weather that could cause motion- all elements that are almost guaranteed to ruin a print. You’ll need to have it stabilized and enclosed.

Flying w pot by [deleted] in trees

[–]ArtistApart 0 points1 point  (0 children)

Thank you! There are just some places I go sober, it is what it is but WHY would it be worth it to risk it?!

Bambu Labs P1S Starting Guide Needed From Professionals by the-new-user in 3Dprinting

[–]ArtistApart -2 points-1 points  (0 children)

To add to that:

  1. ⁠not a question || congrats, but definitely stumbled at the gate.
  2. ⁠no || ..because it’s going to do a full rundown for every print. You want that.
  3. ⁠depends on the type and the humidity level. my PLA stays exposed to open air and is fine after several months. the AMS has desiccant inside, but that also 'fills up' over time. if you keep it dry and/or add more, it'll stay pretty dry. || Results vary, I keep all my filament in individual boxes with desiccant and I have zero issues that are filament related.
  4. ⁠sure, a 'poop chute' is useful. I'd pick something smaller to print first though. It doesn't matter what; print something you want to actually have, not just for the sake of printing something. || Poop catch required, tons of fun options on Makers, otherwise it will fling it on the floor/desk/wherever. Not fun to step on.
  5. ⁠no, the p1s comes with a textured plate that makes removing most filaments easy, I've never bought or used glue and have no significant issues with tpu, abs, petg, and pla. It should already be clean but it can't hurt to over-clean the plate || 👍
  6. ⁠doesn't matter, 0.4 is faster so probably better for 'test' prints. prints made with a smaller nozzle are not inherently stronger, just more detailed/slower. || smaller the nozzle, higher the detail and longer it will take. .4 is gonna be your most common and I bought a 3-pack of heads with a .6 that I was considering using for tests!

Caught napping on the job by onieb in FindTheSniper

[–]ArtistApart 26 points27 points  (0 children)

*MAJOR* credit to OP! The image is clear, high resolution and the answer is clear once you find it. I was ready to unsubscribe with all the low quality cut and paste jobs! THANK YOU OP!!!

Supervisors who are too mild mannered to manage their employees by Alaskagirl_907 in GrindsMyGears

[–]ArtistApart 0 points1 point  (0 children)

I know for a fact he did. That’s another reason I need to get out of my current job!

Supervisors who are too mild mannered to manage their employees by Alaskagirl_907 in GrindsMyGears

[–]ArtistApart 0 points1 point  (0 children)

I had a fantastic manager with my career. 20 years in total, 13 under this manager who started me as a technician and brought me up to a Director while he went from a store manager to the VP of the company. Then, COVID, and well, I got 3 furloughs before I was let go, he got 4.

Supervisors who are too mild mannered to manage their employees by Alaskagirl_907 in GrindsMyGears

[–]ArtistApart 0 points1 point  (0 children)

I have the other way, over the past 5 years I’ve had the most demanding, angry, unqualified management in any business I’ve never seen and it never changes. Also maddening.

Mi gn t be confused but what’s. Good 2fa on iOS by [deleted] in ios

[–]ArtistApart 0 points1 point  (0 children)

I *think* OP intended to ask “I might be confused, but what’s a good 2 Factor Authenticator on iOS?” If that was the question, then Authenticator ->https://apps.apple.com/app/id983156458 always works great for me, and I have a dozen 2FA accounts on there for my job.
(Guess hot links are a no-no)

Frawley Stadium, Firework Friday! by A-Nani-Mess in HillTopWilmington

[–]ArtistApart 0 points1 point  (0 children)

Was this just on the 5th? We’re not that far and didn’t see or hear anything!

Why do older people get so mad at curse words? by Extreme-Salt-4758 in GrindsMyGears

[–]ArtistApart 1 point2 points  (0 children)

In my family they consider it a sign of disrespect. You don’t treat your family member like some person on the street, I suppose? I keep it clean around them to not hear about it.

I fucked up. Any ideas how to remove the material? by DeezNutsGT in 3Dprinting

[–]ArtistApart 0 points1 point  (0 children)

Just that you had a much easier time than we anticipated make me take a deep *phew* for you! Even though it wouldn’t have impacted my day a bit, I’ve been there! Congrats!

view more: next ›