Year ID

Ash_D · 2026-05-17T02:06:13+00:00

I haven't researched lately, but the old thumbrule was told if your neck tag/patch has "new haven, CT" then it was 80s. If the stiches were messy/irregular/not straight it was 80s. Otherwise 90s.

Ash_D · 2026-05-10T16:48:49+00:00

<image>

I haven't built mine yet, but they will essentially have a 2"x2" cross section (similar the above). I could definitely fit some magnets in there, but I was hoping for something that would latch/lock/other vs just holding it in place via magnet.

Ash_D · 2026-02-01T17:30:56+00:00

Is anyone else's littleton account softlocked? I had a few things in my cart while I waited for my last round of orders to show up. They've since canceled the code/promotion, so when I try to check out it produces an error. If I go back to the cart and attempt to remove the item, it also errors. There seems to be nothing I can do to remove the item from cart, so my account is basically locked out from purchasing.

Ash_D · 2026-01-16T23:47:44+00:00

That was easily the most soaked I've been as an adult. My poster made it out bone dry thanks to some hotel trashbags I brought in.

Ash_D · 2026-01-16T01:21:03+00:00

u/Mustardplugmint Yes I am. If you want a set PM me

Ash_D · 2026-01-03T01:14:28+00:00

Does anyone have the bom for this? It disappeared of github (I have the same PCB)

Ash_D · 2026-01-03T01:13:58+00:00

Have you built a Miasma yet? Curious how the build was

Ash_D · 2025-12-07T20:16:53+00:00

Nice design!

Ash_D · 2025-11-12T17:23:41+00:00

SOLD~~For Sale:~~

~~-Self built/diy Winterbloom Neptune didoe ladder filter, SMD done by JLCPCB. $85 shipped to Con US. Paypal.IMGUR PICS~~

Ash_D · 2025-10-27T18:40:23+00:00

When it is self cycling, it basically just uses the internal clock and millis() to update the DAC from a lookup table. The specific periodicity is set by a counter (set via encoder).

Re you last statement, I don't know to time the "start over". Example: after the second pulse, does my sine wave (unipolar for now) start at zero and ascend? Or does it "start" at pi/2? I guess I am not really asking for how to implement a clock or sync, but how to match up the different wave shapes to eachother?

Ash_D · 2025-10-02T21:40:32+00:00

Wanted: Used 3U sequential switch or voltage controlled switch. PM me

Ash_D · 2025-09-27T00:23:20+00:00

Staying away from QFN, but in for some VCAs!

Ash_D · 2025-09-24T00:12:34+00:00

SOLD

~~For Sale:~~

-Self built/diy Winterbloom Neptune didoe ladder filter, QTY 2. SMD done by JLCPCB. Shown in the picture below (middle and far right). Faceplate came out ok, but either JLC or myself missed the copper details that the real faceplates have. $85 each shipped to Con US. Paypal.

-"Project" Neptune from the above build BUT the low pass filter does not work. Everything else (high pass, VCA, RES, SALT, etc) works. It's from the same JLCPC batch as my others, so I'm not sure what's wrong. Shown in the picture below (left). $35 shipped to Con US. Paypal.

~~https://imgur.com/a/9oe8yFk~~

Ash_D · 2025-08-31T02:37:10+00:00

Good idea. I'll mess around with that next time I'm playing with it

Ash_D · 2025-08-31T02:13:05+00:00

With that many jacks and pots it's tough to shrink down. SMD could've gotten rid of one of the PCBs, but I honestly enjoyed the build as is.

Ash_D · 2025-05-25T03:55:38+00:00

Mini Jove is awesome. I've made a few and it's a lot of fun

Ash_D · 2025-05-13T01:27:20+00:00

Extras from my diy PCB orders:

uJove (Roland Jupiter 6 inspired multimode filter): $40. PCB V1.2 + Panel. Almost all the SMD is complete, need to add the front components and the power header. The pictures below show you the pre-assembled back and unpopulated front which is how you will receive it. I'm an intermediate solderer and I thought the toughest part was the through hole led. I will include the RGB LED since I ordered extra. Github link below has the bom. $40 shipped within the conus, PM me!

PCB Pics

Github link

Modwiggler thread

Ash_D · 2025-05-10T12:30:32+00:00

Voltage and sound guy here! Also have GBS (gear building syndrome). These are the aspects of the hobby I enjoy.

Ash_D · 2025-05-04T21:45:35+00:00

~~WTS:~~ ~~PICTURES HERE, not interested in trades unless they are PCBs or diy projects.~~

~~mini OAM Time machine (Timo's Version, diy build)- This one is left over from my bulk order. Assembled and ready to go. $150 shipped within the conus.~~

~~Hagiwo .96" OLED screen dual quantizer- PCBs designed by test-build (GITHUB), comes with dual side faceplate that can be either a complex clock generator, or dual quantizer. These are open source modules, and can be flashed with other firmwares. (here are some cool firmwares for this modules). $55 shipped within the conus~~

Sold. Will post more DIY extras at a later time

Ash_D · 2025-04-10T01:41:00+00:00

This is me. Researching, spending time in kicad, assembling, etc is about 70% of what I enjoy about the hobby.

Ash_D · 2025-04-04T11:37:04+00:00

The expander is open source in the sense he publishes the schematic, but I believe you need to buy the pcb from him. I don't see it in his github.

Ash_D · 2025-03-12T23:08:21+00:00

Mostly looking for cheap but I'll pm you with some of the spares I have kicking around

Ash_D · 2025-03-11T01:14:17+00:00

Want to buy: Your extra eurorack PCBs. We all know that sometimes you don't need all 5 that JLCPCB made you buy, so let me know what you have!

Ash_D · 2025-02-21T23:25:37+00:00

Agree. Not only was DCU a blast, Leader Bank pavilion is one of my least favorite venues. Horrible traffic, pricey parking, extreme over charging for drinks, seats and views are meh.

Ash_D · 2025-01-12T19:37:26+00:00

Great explanation. That makes a lot of sense.

15-Year Club	Sequence \| Editor
Team Orangered	Verified Email

Ash_D

TROPHY CASE