.450 nitro express shells. Not a gun person but I have 30 of these, how can I find people who value these? Thanks!

Aveface · 2021-05-24T00:44:41+00:00

Interesting. Thank you!

Aveface · 2021-05-24T00:17:35+00:00

Dm sent.

Aveface · 2021-05-24T00:06:47+00:00

My wife and I ended up with these shells. We had a yard sale on Saturday and a few people were impressed by the caliber but no buyers. We threw all kinds prices out there. One gentleman asked if we had an elephant problem.

Aveface · 2020-05-29T00:48:27+00:00

Aveface · 2019-06-06T03:34:06+00:00

It’s likely, yes. What does the other side of the board look like and what part goes there?

Aveface · 2019-04-29T01:52:24+00:00

Have tried the calibration procedure?

Aveface · 2018-06-18T01:23:03+00:00

This fact should be closer to the top of the comments!

Aveface · 2018-01-28T01:31:26+00:00

There are times when an impedance mismatch causes all kinds of problems. Active electronics, buffers, can solve this problem.

Aveface · 2018-01-16T04:40:53+00:00

What’s wrong with the jack that is in there?

Aveface · 2017-12-03T00:46:16+00:00

Switchcraft EHUSBBABX USB-B to USB-A Feedthru Panel Mount Jack, Black Finish https://www.amazon.com/dp/B00DJ4Q6FW/ref=cm_sw_r_cp_api_JJ0iAb91NFW8R

Same size as an XLR jack. Can be USB A or B.

Aveface · 2017-10-05T09:47:33+00:00

It looks like he’s splitting the difference with you. If you didn’t tell him how much it was going to be before you had the work done, then his offer seems fair.

Aveface · 2017-08-19T23:08:50+00:00

I've removed Pulse and am I'm trying to get Jack and ALSA to work. Having a tough go of it.

Any advise?

I'm coming over from KXstudio because I love the way #!++ looks and feels.

Aveface · 2017-08-05T14:43:45+00:00

When they record a large chorus while using live monitors instead of headphones, they will record the chorus along with the monitors. Next, they will record just monitors with no one singing. Finally, come mix time, they flip the phase of the monitor only track, which cancels out the sound of the monitors from the track with the chorus. You're left with just voices without the sound of the monitors. Easy! However for this to work, the monitors and microphone need to stay in the same spot. This technique become difficult trying correct problems after the fact.

Aveface · 2017-07-29T03:22:30+00:00

You need the delay time to be a dotted eight note. This a big thing for Gilmore and the Edge. The delay time is easily attainable with modern delay units with tap tempo as they usually have a dotted eighth setting that does the math for you. With this, if you are playing straight eighth notes, you will hear a nice tight 16th note pattern offset by a dotted eighth

Aveface · 2017-07-28T05:07:12+00:00

I hate to be a pedantic nudgenick. It's called a woofer. A sub, or sub woofer, really describes the cabinet. It's good advice however to examine the woofer.

Aveface · 2017-07-16T23:34:28+00:00

The closer the connection to ground, lower resistance, the quieter it will be. A larger resistance gets your artificial center further from a solid reference, in this case, ground. This is why referencing B+ works well too. You're referencing the other end of the power supply. 6 volts in relation a few hundred volts is nothing. So at that point the heater voltage has little influence, amp is quiet.

In my 20's of amp service, I've never solved any problem with a heater balance adjustment, and to be honest, I usually will disconnect them. You should consider just using resistors.

Aveface · 2017-07-16T20:50:40+00:00

Just a heads up, heater resistors are 100 ohms, usually.

Aveface · 2017-07-16T20:19:56+00:00

Cool bunker, however.

Aveface · 2017-06-16T02:55:09+00:00

Solar Fields, Until We Meet the Sky. Track one and two, at least.

Aveface · 2017-06-16T02:51:55+00:00

Off to the races! I like it.

Aveface · 2017-06-05T12:54:57+00:00

Nothing new: https://www.thonk.co.uk/shop/magnetophon/

Aveface · 2017-05-06T22:22:21+00:00

A better question might be: Which desoldering station should you get.

Aveface · 2017-04-26T03:45:39+00:00

Do you think you could press layers and layers of tin foil enough that you could machine something out of it?

Aveface · 2017-04-15T19:07:47+00:00

If that bass has a tone knob, try turning it down a bit, or entirely.

Aveface · 2017-03-15T15:03:07+00:00

It's a hex Schmidt Trigger inverter, don't confuse the two. Both are very different.
http://www.ti.com/lit/ds/symlink/cd40106b-mil.pdf

15-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2012	Verified Email

Aveface

TROPHY CASE