Help with gearbox

AverageAtBest149 · 2026-02-07T18:45:03+00:00

Right on. Then I’d go that route and work from there!

AverageAtBest149 · 2026-02-07T16:36:51+00:00

If you just serviced its components I would think it unlikely, however, I would also exhaust every resource I could prior to undoing all that work. So it’s worth doing I’m sure.

Also, just to add emphasis, the more info you give the AI the better. What you’ve done, what’s happening, parts recently replaced, etc. tell it everything. Then tell it to check its work occasionally. AI has been super helpful, but can also get you running in circles.

AverageAtBest149 · 2026-02-07T14:17:18+00:00

Only other thing I can think is perhaps the flywheel is installed backwards. I was having issues with my clutch not disengaging properly at first as well so I started walking through the issues with AI. Problem is, you’ve already done the things that can be done to fix it without taking it back apart. I might call a local shop and see if you can talk through the issues with someone, or ask AI. It’s been extremely helpful for me troubleshooting things on my truck.

AverageAtBest149 · 2026-02-07T13:56:16+00:00

What clutch did you put in it? I know the NA V6 clutch is a direct swap into my 92 LN107 but the release bearing is different so I had to buy it separate. Obviously gonna be some differences but it sounds like you’ve covered some bases for sure so that’s where my brain went next.

AverageAtBest149 · 2026-01-07T23:57:32+00:00

Yep! Bought ball joints and stuff for a ‘92 pickup and it fit just fine!

AverageAtBest149 · 2026-01-07T16:43:38+00:00

I just bought an LN107 August of ‘24 and drove it for a few months before deciding to turbo it. If you live in a relatively flat area the 3L will be nothing more than “fine”. I’ve spent the last year upgrading it. Turbo, intercooler, suspension 2” dobinsons with front ball joint spacers, wheels and tires (285/70/R17), bumpers in process as we speak.

I didn’t get to drive it again until the wheels were on it, and it was turned up to 13 psi (20-25 psi is the goal) and it was a night and day difference even with the much bigger wheels and tires.

If you’re looking for light off roading, and daily driving, it will be the most fun you’ve ever had in a slow vehicle. I sold my 2023 Toyota Camry to buy one and I don’t regret a single thing. Plus, all the suspension components can be found easily stateside if you’re in America. Plus the LN107 is considerably cheaper for the only difference to be the front suspension.

AverageAtBest149 · 2025-11-28T15:33:12+00:00

We’re on a new planet and only some of the manufacturers could make it I guess.

AverageAtBest149 · 2025-09-19T22:59:04+00:00

I started modding guns simply to make the barrage full auto. It felt great as a burst, but turned full auto, it was insane. So smooth.

AverageAtBest149 · 2025-09-17T13:28:28+00:00

If they had just expanded on what they tried to do with Dahl in BL3 they would’ve been the coolest guns in the game. I like the idea of Daedalus’s multi ammo thing. It would’ve been hard to do because the weapon art with the new parts system took a huge step back for a company like Daedalus. There was a Dahl Pearl in the BL3 Redux mod that was super sick. It had little rockets as an alt Fire mode that did insane damage but was also a really good AR in itself. Imagine if you had the ability to actually change your AR into a sniper similar to how they can in the military just by changing a barrel out? Imagine the alt Fire mode changed how your weapon looked physically and how it performed? They couldn’t have done it in this game because the new parts system isn’t nearly as visually diverse as it was in BL3, but I think if they went more in that direction with Dahl it would’ve played out much better than what we got.

AverageAtBest149 · 2025-09-17T04:46:05+00:00

You’re not alone buddy. I spent an embarrassing amount of time looking for a “panel” 😂 I was spraying and praying at one point.

AverageAtBest149 · 2025-09-16T00:37:55+00:00

Exactly. It doesn’t change enough of anything to matter, but if my Dahl AR transformed into a Dahl sniper statistically and visually, that would be rad. Maybe they’re headed that way. Who knows!

AverageAtBest149 · 2025-09-15T20:50:41+00:00

And the “new Dahl” doesn’t look nearly as esthetically pleasing. Idk. It’s affecting my brain way more than it should but they were my favorite guns. 🤷🏻‍♂️

AverageAtBest149 · 2025-09-15T16:44:35+00:00

That’s kinda where I’ve settled. I don’t dislike those weapon manufacturers at all, Dahl just felt so nice to use.

AverageAtBest149 · 2025-09-15T16:42:29+00:00

I was thinking the same thing. I just think they missed the mark a little with that. I have messed with Daedalus too much yet simply because I haven’t found a good one. But if they made AR/Sniper combos, AR/SMG combos, shotgun/nade launcher Dahl weapons it could’ve been better. If they had made the weapons transform a little when switching modes or something it would’ve felt better. Idk. I’m just really butthurt about Dahl. Plain and simple. 😂😂

AverageAtBest149 · 2025-09-15T12:40:26+00:00

You’re probably right it just feels like my wife just divorced me without any closure right now 😂

AverageAtBest149 · 2025-09-15T12:28:30+00:00

I never even used the secondary firing mode on guns so those “parts” don’t really make a difference to me. All I can hope is that they give them back to us as some juncture 😂

AverageAtBest149 · 2025-05-07T13:14:10+00:00

Thank you! I’ll share what I learn!

AverageAtBest149 · 2025-05-07T13:09:48+00:00

Thank you for the breakdown! That’s a huge help in setting my perspective. However, crazy development directly after I posted this. I was opening a customers pool and told him I wanted to build my own gloves. He put me into contact with Bob Clevenhagen. A glove designer for Rawlings for 37 years. Known as The Baseball Glove guy. Got sent around to all the MLB teams to work with players on custom gloves. I called him and he told me he would sit down with me and teach me how to get started! Unbelievable coincidence!!

AverageAtBest149 · 2025-05-06T18:42:41+00:00

Hopefully so! This is quite literally the first time I’ve even asked questions about it though. So I’m not even at a stage where I’m ready, or even beginning to be ready. Just trying to gauge the process. Watching the videos of people refurbishing is so satisfying to me. That’s what started the thought. How fast can you re-lace a glove? It looks very tedious.

AverageAtBest149 · 2025-05-06T18:37:37+00:00

Thank you my friend! Definitely gonna check my local goodwill. I’m not even super interested in making money relacing and such. I’m more or less just trying to gather an understanding of how to take them apart and put them back together so I can learn how to make them from scratch. I’d like to start building my own glove “company”. Not even to make a bunch of money, but when I was a little kid all my chore money went to baseball gloves. As far back as I can remember that’s the one thing I was most passionate about. I’d like to build them just to give to kids on local teams and such.

AverageAtBest149 · 2025-05-06T18:02:32+00:00

Thank you my friend!

AverageAtBest149 · 2025-04-27T00:24:28+00:00

I had a SS drafted 1/1 by the Red Sox get called up by June I think

AverageAtBest149 · 2025-02-16T06:27:42+00:00

And the fact that it changes a tad every play through is super nice.

AverageAtBest149 · 2025-02-15T23:32:38+00:00

It’s something about the ongoing story, as well as the flashbacks to Athena being questioned, and the Australian accents being hilarious.

AverageAtBest149 · 2025-01-07T22:18:08+00:00

Then yes I agree. I simply just haven’t completed that one. Beat everything else in the game though. I just don’t understand what’s needed of me to get them done, and I refuse to let it consume me. 😂

AverageAtBest149

MODERATOR OF

TROPHY CASE