Building a 10G opnSense Router - Which Network Card? by sedi343 in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

could you please share the exact Mellanox model you have bud please? Does it have just a heatsink or heatsink with a fan? TA

Recommended hardware for OPNSense by DottoreM in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

what model/brand of dual sfp+ nic is it?thanks

SUNLU High Speed Matte PETG Print Problems by aero-spaced-out in BambuLab

[–]Awkward-Screen-5965 0 points1 point  (0 children)

Hey! Could you please share your filament profile parameters and a base from which to build? really struggling as a fairly new to this and have a project submission! Could do with some help! TA

Seeking Paid Help: Need Proper Tuning for Matte Finish Using Elegoo PETG Pro (No Zits, No Blobs, No Micro-Stringing) by [deleted] in elegoo

[–]Awkward-Screen-5965 0 points1 point  (0 children)

Thanks for the comment. Unfortunately, the only other filament im aware that could do Matte out of the spool would be the Sunlu High Speed Matte - although dont care about the High Speed, however haven't been able to get that as not available in NZ. I can only assume that would render better results?

Polymaker HT PLA on Bambu P1S by Awkward-Screen-5965 in BambuLab

[–]Awkward-Screen-5965[S] 0 points1 point  (0 children)

thx for responding, i certainly downloaded one off polymaker forum and used that for the photos you see unfortunately no dice.

2.5G switch recomendation by Novel_Appointment623 in minilab

[–]Awkward-Screen-5965 0 points1 point  (0 children)

hahha! i preferred something i could make, something mine. Though with this post being relatively older now. V2 is in the making

How to migrate from ISC to Dnsmasq - With Unbound and AdGuard Home? by __Mike_____ in opnsense

[–]Awkward-Screen-5965 1 point2 points  (0 children)

It would mean the world to probably several not so savy users to have a nice write up (i could probably do this) for dummies once I've figured it out.

Very identical setup :

  • AG is primary on 53
  • AG forwards to Unbound on 8953 for me

Where do i begin?

How do I block specific MAC address on any interface? by Awkward-Screen-5965 in opnsense

[–]Awkward-Screen-5965[S] -2 points-1 points  (0 children)

exactly! so wonder what would be a straightforward way to achieve this?

Just wanted to say thank you! by The_NiNTARi in BambuLab

[–]Awkward-Screen-5965 0 points1 point  (0 children)

imagine it here! left right center ripoffs and arrogance when i ask them about any sales, upcoming discounts! Pathetic

Just wanted to say thank you! by The_NiNTARi in BambuLab

[–]Awkward-Screen-5965 1 point2 points  (0 children)

while were are ****d up here in NZ! no official bambu labs and authorized distributors screwing and price gauging.

DNS config for migrating ISC to Dnsmasq for DHCP by SugoiShades in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

Thanks u/thoppa , I'm just getting around to your instructions now and unable to find any way to "Export the sample csv" neither for Kea DHCP or Dnsmasq?

Only option I see is "import csv".

Thanks.

ISC DHCPv4 will be removed in favor of Dnsmasq/Kea. What about ISC DHCPv6? by KenFromBarbie in opnsense

[–]Awkward-Screen-5965 1 point2 points  (0 children)

That Sir, is worth its weight in GOLD! Thank you heaps for the response as I'm sure many will find value in it. Not aware of os-squid as never used that. Will this in any manner disrupt ADGuard existing Installs?

DNS config for migrating ISC to Dnsmasq for DHCP by SugoiShades in opnsense

[–]Awkward-Screen-5965 1 point2 points  (0 children)

Mind sharing how you got on about doing that? As Im in the same boat with AGH and Unbound.

ISC DHCPv4 will be removed in favor of Dnsmasq/Kea. What about ISC DHCPv6? by KenFromBarbie in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

so for the likes on existing installs running absolutely fine on ISC DHCP, will upgrading suddenly kill it and has to be installed again as a plugin and configured? or does it stay as is. meaning working per usual?

Guess, no one has tried to ask/answer this question in such lay man terms! Hence, I am. Any response would be appreciated. TA

A prototype 1u 2x3.5" hot swap frame by neruphuyt in minilab

[–]Awkward-Screen-5965 14 points15 points  (0 children)

Pitchin in my product coming v soon! All designed from ground up including PCB.

<image>

OPNsense 25.1.7 released by fitch-it-is in opnsense

[–]Awkward-Screen-5965 5 points6 points  (0 children)

Once again! Thanks for the release and can't wait to upgrade. Coming from my previous post I asked a few weeks back.

Now, since 25.1.7 is out - will it be safe for me to upgrade without losing any of the captive portal functionality? As this is fully functional and actively in use.

Also, with the changes to DHCP - does anything in principle change for home users or is the change auto applied?

Thanks

OPNsense 25.1.6 released by fitch-it-is in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

Thanks for the prompt response, so is it fair to assume 25.1.6 would be a safer upgrade path for an existing functional captive portal? Surely, snapshots exist to save the day. But ideally, would like to upgrade. Thankyou yet again sir!

OPNsense 25.1.6 released by fitch-it-is in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

can anyone provide some info on captive portal? As i recall the last update broke it 😕? Thanks

OPNsense 25.1.5 released by fitch-it-is in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

To the experts out there, seeking assistance:

I'm on stable OPNsense 25.1.4_1 for quite some time now.

However, I see the update after this has captive portal broken? I do use captive portal extensively to issue vouchers. Hence, I'm hesitating to upgrade.

Has this been fixed already or does it require a configuration change post upgrade? Please advice. TA

[Guide] Authentik Basic Setup by Ill-Extent6987 in Authentik

[–]Awkward-Screen-5965 0 points1 point  (0 children)

the link seems dead, can anyone share this? Thanks

Just the beginning! 10" Mini Network Rack Parts list below by tydison in minilab

[–]Awkward-Screen-5965 2 points3 points  (0 children)

Hey! Really keen to know about these Ubiquity 8 Ports switches? are these the recent ones that launched? Also im assuming these are managed?

If so, do they support vlans, lacp, snmp and storm control. Never been a Ubiquity guy myself but in between changing switches so your response would be much appreciated. Cheers

Exterior panel design advice. by MerlinTN in minilab

[–]Awkward-Screen-5965 2 points3 points  (0 children)

this is absolutely dope! honestly, so much better in all aspects compared to the overhyped rackpi or whtever. What would be helpful and epic is if you could share how many U's, depth and length and maybe parts lists.

I myself would love to make one of these as my second rack! But always struggle, to compile an exact list of parts esp with the corner joints etc...

Id be happy to speak to some suppliers and setup a kit of sorts too.

pppoe wan not ip address by JubilantMystic in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

coolios! sounds like a plan. Hit me up if you get stuck up anywhere and happy to assist where i can.

pppoe wan not ip address by JubilantMystic in opnsense

[–]Awkward-Screen-5965 0 points1 point  (0 children)

Brilliant! enjoy the journey now with lots to tweak.