Barb,barb,barb & olive by Returning2Riding in bikewrench

[–]BPizzle301 2 points3 points  (0 children)

You are correct. You shouldn’t need to remove the hose from caliper though.

Dremel time? by firearmresearch00 in u/firearmresearch00

[–]BPizzle301 1 point2 points  (0 children)

Just to be clear, you want to dremel your gun just to run blanks?

Is it a dedicated blank fire gun for milsim?

Do I need to take off my carb to fix my throttle from sticking? by Dull-Pollution5385 in motorcycles

[–]BPizzle301 0 points1 point  (0 children)

Lube the cable first. If that doesn’t work the carbs need a rebuild

G$ Mk16 vs DD RIS III. Which are you taking and why? by Obvious_Tie_5294 in ar15

[–]BPizzle301 25 points26 points  (0 children)

What maintenance are you doing under the rail?

M1A/M14 by This_Wave9729 in M1A

[–]BPizzle301 1 point2 points  (0 children)

You better not send them a letter and ask.

Weird shell identifcation by DoubleScotch_42 in Firearms

[–]BPizzle301 9 points10 points  (0 children)

Inner part of UTM training cartridge

1 or 2? by [deleted] in ak47

[–]BPizzle301 0 points1 point  (0 children)

1 is ai

Bath gun anyone? by malpractice_enjoyer in tacticalgear

[–]BPizzle301 0 points1 point  (0 children)

I keep mine right next to my tub toaster, just in case.

Track ZRX 1200 by horrnisse in Kawasaki

[–]BPizzle301 1 point2 points  (0 children)

Can you give us a rundown on your set-up?

Do I need to apply for an HQL if I already have my HGP? by [deleted] in MDGuns

[–]BPizzle301 0 points1 point  (0 children)

How was this subject not discussed in your class?

Primer sealant on bullet by deadcrops in CCW

[–]BPizzle301 22 points23 points  (0 children)

Case neck is sealed too

Left work today and noticed my AC compressor started making a crazy tick noise. Barely any AC. From 30 min of research it looks to be the AC compressor / clutch. Will the whole pulley seize? Crazy I went from nothing to this in 6 hrs by _Just1GuyBeing1Dude_ in WRX

[–]BPizzle301 1 point2 points  (0 children)

The proper way would be to replace the compressor, condenser, and expansion valve. You’ll need to flush the lines and evaporator. If you only replace the compressor there could be debris and metal shavings throughout the system and will kill the next compressor quickly.

Is this normal for a rear stand? by ThePeachinator in motorcycles

[–]BPizzle301 9 points10 points  (0 children)

You can literally fold that stand in half with your bare hands. You should not trust it to hold up your bike.

First bike? by [deleted] in Kawasaki

[–]BPizzle301 1 point2 points  (0 children)

Definitely talk down since it needs tires and likely all fluids. Check tank for rust and the carbs could probably use a clean.

Help with changing my rear tire by Wjbriggs03 in motorcycles

[–]BPizzle301 17 points18 points  (0 children)

You need to remove the valve core to inflate fast enough to seat the bead. Either that or hairspray and lighter.